• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.97.2-97
• /
• 1998

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.98.4-98
• /
• 1998

• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.28-32
• /
• 2001

It was studied in the present work how the thermal cycling performance of LOC (lead on chip) packages depends on the package construct or leadframe materials. First, package body thickness and Au wire diameter were manipulated for the selection of proper package design. Secondly, two different types of leadframe materials (i.e. copper and 52%Fe-48%Ni alloy) were tested to determine the better material for improved reliability margin of plastically encapsulated microelectronic packages. This work shows that manipulating package body thickness was more effective than an increase of Au wire from 23$\mu\textrm{m}$ to 33$\mu\textrm{m}$ for the prevention of wire debonding failure. Further, this work indicates that the LOC packages including the copper leadframes can be more susceptible to thermal cycling reliability degradation due to chip cracking than those including the alloy leadframes.

• 대한본초학회지
• /
• 제24권1호
• /
• pp.9-14
• /
• 2009

Objectives : The purpose of this study is to investigate on storage characteristics of flavouring oriental medicine materials according to Packaging method(Aluminum package, PP). Methods : This experiments were carried out by field survey and storage characteristics were carried out by physicochemical determination. Results : Flavouring oriental medicine materials were used to in aluminum package to keep original flavour in Japan and Chinese by field and study survey. In view of this survey results, it is very desirable to use zipper Aluminum package in flavouring oriental medicine materials(Perilla perfrutescens var. acuta, Mentha arvensis L. var. piperascens malinvaud). Conclusions : This study results revealed that Aluminum package were superior to any other package method on the basis of keeping original flavour and to reduce microbial contamination in oriental medicine materials.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.98.3-98
• /
• 1998

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.108-108
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 춘계학술발표대회 및 제12회 신소재 심포지엄
• /
• pp.15.2-15.2
• /
• 2007

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.138.2-138
• /
• 1998

• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.63-69
• /
• 2013

Package on Package(PoP)용 하부 패키지에 대해 플립칩 본딩으로 칩을 기판에 실장한 패키지와 die attach film(DAF)을 사용하여 칩을 기판에 접착한 패키지의 warpage 특성을 비교하였다. 플립칩 본딩으로 칩을 기판에 실장한 패키지와 DAF를 사용하여 칩을 기판에 실장한 패키지는 솔더 리플로우 온도인 $260^{\circ}C$에서 각기 $57{\mu}m$와 $-102{\mu}m$의 warpage를 나타내었다. 상온에서 $260^{\circ}C$ 사이의 온도 범위에서 플립칩 실장한 패키지는 $-27{\sim}60{\mu}m$ 범위의 warpage를 나타내는 반면에, DAF 실장한 패키지는 $-50{\sim}-153{\mu}m$ 범위의 warpage를 나타내었다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.729-737
• /
• 1994

A three-dimensional finite element model of a 20-pin plastic dual-in-line package(PDIP) plugged into a PCE has been developed by using the finite element code ANSYS. The model has been used for thermal characterization of the package during its normal operation under natural convection cooling. Temperature distributions in the package and PCB are obtained from numerical analysis and compared with experimentally measured data. Various cases are assumed and analyzed to study the effects of package and PCB materials on thermal characteristics of PDIP with and without aluminum heatspreader. Thermal dissipation capability of PDIP is greatly increased due to copper die pad/lead frame and heatspreader. However, thermally induced stresses in the package and fatigue life of chip are improved for PDIP with Alloy 42 die pad/lead frame and no heatspreader. It is also found that the role of PCB on thermal characteristics of PDIP is very imporatant.