• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.346-361
• /
• 2021

The range of D. spathulata identified in this survey was between N 35° 24' 58" ~ N 35° 26' 35", E 129° 05' 43" ~ E 129° 07' 04". It is located at an altitude of 98~592 m. The soil pH was strongly acidic in the range of 4.2~4.9, with a canopy openness of 18.56% and a chlorophyll index of 36.74 ± 2.80. As a result of the TWINSPAN analysis, 20 plots of 100 m² each were divided in 4 communities: Pinus densiflora community, Quercus monglica-Diabelia spathulata community, Quercus serrata-Diabelia spathulata community and Carpinus tschonoskii subassociation. The result of species diversity was 0.7615, and evenness and dominance were found to be 0.6077 and 0.3923, respectively. The height of D. spathulata is up to 3.4 m, and the average height is 1.1 m, with most of the species distributed as shrubbery and herbaceous. The average population density of the 20 plots was 1.635 individuals/m², the height range of flowering was 1.0 ~ 1.8 (aver. 1.39 m) and the rate of flowering was 27.37%. It's propagation pattern was mainly formed by extending the rhizome to the side, creating a colony of ground stems.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.15-19
• /
• 2022

Purpose [⁶⁸Ga]PSMA-11 is needed the high reproducibility, excellent radiochemical yield and purity. In term of radiation safety, the radiation exposure of operator for its production also should be considered. In this work, we performed a comparative study for the fully automated synthesis of [⁶⁸Ga]PSMA-11 between non-cassette type and cassette type. Materials and Methods Two different type of modules (TRACERlab FX N pro for non-cassette type and BIKBox for cassette type) were used for the automated production of [⁶⁸Ga]PSMA-11. According to the previously identified elution profile, Only 2.5 ml with high radioactivity was used for the reaction. After adjusting the pH of the reaction solution with HEPES buffer solution, the precursor was added and reacted with at 95 ℃ for 15 minutes. The reaction mixture was separated and purified using a C18 light cartridge. The product was eluted with 50% EtOH/saline solution and diluted with saline. It was completed by sterilizing filter. In the non-cassette type, the aforementioned process must be prepared directly. However, in the cassette method, synthesis was possible simply by installing a kit that was already completed. Results Both total [⁶⁸Ga]PSMA-11 production time were 25±3(non-cassette type) and 23±3 minutes(cassette type). The radiochemical yield of the non-cassette type(65.5±5.7%) was higher than that of the cassette type(61.6±4.8%) after sterilization filter. The non-cassette type took about 120 minutes of preparation time before synthesis due to washing of synthesizer and reagent preparation. However, since the cassette type does not require washing and reagent preparation, it took about 20 minutes to prepare before synthesis. Both type of synthesizer had a radiochemical high purity(>99%). Conclusion The non-cassette type production of [⁶⁸Ga]PSMA-11 showed higher radiochemical yield and lower cost than the cassette type. However, The cassette type has an advantage in terms of preparation time, convenience, and equipment maintenance.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.315-326
• /
• 2013

This study investigated the temporal-spatial distribution and variations in water quality parameters (temperature, salinity, pH, DO, COD, SPM, DIN, DIP, silicate, TN, TP, and chlorophyll-a) in the coastal area of Jeju, Korea, adjacent to aquaculture ponds (Aewol-ri, Haengwon-ri, Pyosun-ri, and Ilkwa-ri). Data were collected bimonthly from February 2010 to December 2011. A principal component analysis (PCA) identified three major factors controlling variations in water quality during the sampling period. Aquaculture effluent water led to large changes in nutrient levels. The highest nutrient values were observed during the investigation period. The relatively large increase in organic matter at the sampling stations coupled with sea area runoff events during the summer rainy period. Variation in chlorophyll-a concentration was mainly driven by meteorological factors such as air temperature and rainfall in the coastal areas of Aewol and Haengwon. In the coastal areas of Pyosun and Ilkwa, pollution was caused by anthropogenic factors such as discharge of aquaculture effluent water. High nutrient concentrations at the majority of the coastal stations indicate eutrophication of coastal waters, especially within a distance of 300 m and depth of 10m from drainage channels. Coastal eutrophication driven by aquaculture effluent may be harmful inshore. Events such as eutrophication may potentially influence water pollution in aquaculture ponds when seawater intake is detected because of aquaculture effluent water.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2017

CaO-based by-product, which consist of CaO, $SO_3$, $Al_2O_3$ and so on, has being used to raw materials of CaO compound. When It was applied to recycling water of remicon, concrete performance can be enhanced because hydration reaction of powder material is accelerated. In this study, activated-sludge, which was putted desulfurization gypsum of CaO-based in recycling water, was manufactured to verify effect of them, and then they was investigated by characteristics of cement matrix and mortar. As a results, they indicated reduction of setting time and high soundness in cement matrix, and acceleration of hydration reaction can be verified by XRD analysis. Also, it can be maintained good workability if water content by usage of desulfurization gypsum, which used for production of activated-sludge, was adjusted. In addition, it can be verified strength development by activated-sludge although cement content by usage of desulfurization gypsum was reduced.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.166-172
• /
• 2005

In order to prepare liqueur of Acanthopanax koreanum, changes in major constituents by soaking below 0.5 cm size dried sample 700 g in 10 l of $15{\sim}95%$ spirit solution for 70 days were investigated. Color b was increased according to lower ethanol concentration and longer soaking periods. Extract was increased gradually with soaking periods, and the content was $0.6{\sim}0.7%$ (w/v) with stem, $1.0{\sim}1.5%$ (w/v) with root. Eleutheroside B and E were extracted rapidly within 20 days of soaking, moreover were increased according to ethanol concentration within 15% to 70%. Acantoic acid was extracted rapidly $2.8{\sim}22.6\;{\mu}g/ml$ with stem, and $560{\sim}1,700\;{\mu}g/ml$ with root within 5 to 10 days. For preparation of liqueur of Acanthopanax koreanum, it is necessary to soak more portion of dried root with $60{\sim}80%$ ethanol concentration for $30{\sim}50$ days, and then to blend after aging for 13 weeks.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.37-45
• /
• 1983

유제품(乳製品)의 품질(品質)과 밀접(密接)하게 관련(關聯)되어 있는 skim milk protein의 가열(加熱)에 의(依)한 상대변화(狀態變化)를 단백질(蛋白質) 화학적(化學的) 측면(側面)에서 연구(硏究)하였다. 1. Skim milk 중의 calcium농도(濃度)가 높아질수록 가열시(加熱時) 점도(粘度)는 급증(急增)하였으며 gel화(化)가 일어나는 온도(溫度)는 점점 저하(低下)되었다. 이러한 사실(事實)로 보아 calcium ion은 유단백질(乳蛋白質)의 열안정성(熱安定性)에 결정적(結定的) 영향(影響)을 미치며 calcium존재(存在) 하(下)에서 가열(加熱)시킬 때에는 우유단백질(牛乳蛋白質)들을 균일분산계(均一分散系)로부터 불균일회합상태(不均一會合狀態)로 전이(轉移)시키는 것으로 결론(結論)되었다. 2. 일정(一定) 온도(溫度) skim milk의 안정성(安定性)에 대(對)한 가열시간(加熱時間)의 효과(效果)는 전혀 나타나지 않았다. 3. 등전침전(等電沈電)시킨 casein을 재용해(再溶解)시킨 후(後), skim milk 내(內)에서와 동일(同一)한 calcium농도(濃度) 환경(環境)으로 조절(調節)하고 가열(加熱)하였을 때 skim milk가 불안정성(不安定性)을 보이는 온도(溫度)보다도 저온(低溫)에서 침전(沈澱)으로 분리(分離)되었다. 따라서 가열(加熱)에 불안정(不安定)한 구분(區分)은 whey protein일 것으로 추정(推定)하였으며, 이는 skim milk 내(內)에서 casein에 의(依)하여 보호(保護)되는 것으로 해석(解析)되었다. 5. pH를 변경(變更)시킨 skim milk의 점도(粘度) 증가(增加)에는 calcium ion에 의(依)한 기여(寄與)가 컸으며, calcium은 유단백질(乳蛋白質)의 응집(凝集)을 촉진(促進)할 때 Ca-bridge로 작용(作用)하는 것이라고 결론(結論)되었다. 6. 비가열(非加熱)의 skim milk는 6개의 fraction으로 분획(分劃)되었음에 비(比)하여, $95^{\circ}C$에서 10분(分) 가열(加熱)했을 때는 fraction A 및 B가 소실(消失)되었고 새로운 fraction F@를 출현(出現)시켰다. 7. Electrophoretogram에서 fraction C 및 C#는 모두 3개의 band를, fraction F 및 F#는 모두 4개의 band를 나타냈으며 가열(加熱) 전후(前後)의 이동도(移動度)에도 차이(差異)가 없었다. Fraction D는 6개의 band로 D#에는 그 외(外)에도 3개의 band가 더 나타났다. fraction E 및 E#는 모두 4개의 band를 보였으나, 그 성분(成分)들의 이동도(移動度)는 모두 대응(對應)되지 않았다. Fraction A 및 B, 그리고 fraction D 및 E에는 가열(加熱)로 인(因)하여 변화(變化)를 받게되는 유단백성분(乳蛋白成分)이 포함(包含)되어 있을 것으로 추정(推定)되었다.

• Korean Journal of Microbiology
• /
• v.49 no.3
• /
• pp.275-281
• /
• 2013

Probiotics have been reported to benefit human health by modulating immunity, lowering cholesterol, improving lactose tolerance, and preventing some cancer. Once ingested, probiotic microorganisms have to survive harsh conditions such as low pH, protease-rich condition, and bile salts during their passage through the gastro-intestinal (GI) tract colonize and proliferate to exert their probiotic effects. The dual coating technology, by which the bacteria are doubly coated with peptides and polysaccharides in consecutive order, was developed to protect the ingested bacteria from the harsh conditions. The aim of the study was to evaluate the viable stability of a doubly coated blend of four species of Bifidobacterium by comparing its bile/acid resistance and heat viability in vitro with that of the non-coated blend. After challenges with acid, bile salts, heat, and viable cell counts (VVCs) of the dual coated and non-coated blend were determined by cultivation on agar plates or flow cytometric measurement after being stain with the BacLigtht kit$^{TM}$. The results showed that the dual coated blend was much higher resistant to the acidic or bile salt condition than the non-coated blend and heat viability was also higher, indicating that the dual coating can improve the survival of probiotic bacteria during their transit through the GI tract after consumption.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.105-111
• /
• 2004

The changes of microflora and chemical characteristics during fermentation process of cotton waste for oyster mushroom cultivation were investigated with 5 l bench-scale reactors placed in an incubator at different temperatures ($40,\;50\;and\;60^{\circ}C$). Cotton waste was wetted to 70% moisture, and air flow rates to the substrate were 50, 100 and 300 cc/min. In processing of composting, the mesophilic bacterial population decreased sharply but thermophilic bacterial population increased. In case of fungi, both mesophilic and thermophilic population decreased. The daily $CO_2$ evolution showed little difference in all treatments, while $NH_3$ dropped sharply after 3 days. The desirable composting temperature and air flow based on the mycelial growth of oyster mushroom were $50^{\circ}C$ and 100 cc/min, respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.37-45
• /
• 2017

To visually identify the spoilage of chicken breasts, a three layered freshness indicator consisting of PET/bromocresol green (BCG)-ethylene vinyl acetate (EVA)-acetic acid (AA) composite layer/porous substrates was successfully prepared and their performance were simulated at 20% of $CO_2$ and 4 different trimethylamine (TMA) concentrations to evaluate color change at minimal spoilage level. The visibility and range of color changes of the as-prepared indicators responding to TMA concentration as a simulant were strongly dependent on the concentrations of BCG and AA. As the BCG content increased, the visibility of color change in the freshness indicators was apparently improved and the range of color change could be controlled by contents of AA. Among the as-prepared freshness indicators, 'G0.12_A0.5' which consisting 0.12g of BCG and 0.5g of AA was selected as an optimum composition due to the highest visibility at TMA 20 mg% corresponding to the minimal spoilage level. The color of the indicator changed from yellow to green for spoilage indication of chicken breast, which could be easily seen with the naked eyes and well consistent with the simulation results. It is expected that our developed freshness indicator can be useful in monitoring various food freshness and quality.