• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.545-550
• /
• 1998

Succinic acid, valuable $C_4$-dicarboxylic acid as a renewable alternative feedstock, is currently produced commercially by the petrochemical process, but extensive efforts have been devoted to establish the biological process for mass production of succinic acid. In this study, the bioconversion of fumaric acid to succinic acid was investigated. We isolated an Enterococcus sp. RKY1 KCTC 8890P, facultative bacterium, capable of the bioconversion of fumaric acid to soccinic acid very rapidly and efficiently. At batch fermentation, the amount of succinic acid production increased with increase in initial fumaric acid from 40 to 100 g/L. With fumaric acid of 70 g/L, the average specific and volumetric production rate, molar yield were reached up to 0.64 g/g.h, 4.87 g/g.h, and 96.5%, respectively. Maximum concentration of succinic acid of 88.9 g/L was achieved with molar yield of 89% with fumaric acid of 100 g/L in less than 20 hours.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.103-108
• /
• 2015

Production of foreign proteins by transgenic plant cell cultures has several advantages such as post-translational modification, low risk of product contamination and low-cost production and purification. However, target proteins are degraded by extracellular proteases existing in the media. A solution to this problem is the use of perfusion culture and ion exchange chromatography for the application of integrated bioprocess using in situ recovery. With this method, production of human granulocyte-macrophage colony-stimulating factor (hGM-CSF) was investigated in this study. First, optimization of cell concentration during the induction phase for the production of hGM-CSF was examined. As cell concentration increased, the level of hGM-CSF was decreased due to the presence of extracellular proteases. Induction using sugarfree media produced 33% more hGM-CSF. The effects of pH on the binding of hGM-CSF to cationic and anionic exchange resins were also investigated. In terms of stability, optimal pH was found to be 5~7. In the case of using buffer exchange when CM-Sepharose was used as a cationic exchange resin, optimal pH for binding was 4.8 and adsorption yield was 77%. When DEAE-Sepharose was used as an anionic exchange resin, it was 5.5 (74%). Without buffer exchange, optimal pH was 4.6 (84%). From these results, an integrated bioprocess using in situ recovery with simultaneous production and separation of foreign protein in transgenic plant cell suspension cultures was found to be feasible.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1668-1675
• /
• 2004

The effect of pH on surface hydrophobicity, sulfhydryl group, infrared spectrum, SDS-PAGE (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) pattern and enthalpy was investigated in recovered protein from mackerel and frozen blackspotted croaker by alkaline processing. Hydrophobic residue in myofibrillar protein exposed to the surface of protein, and hydrophobic interaction were the highest around 6$0^{\circ}C$. The surface hydrophobicity was different between myofibrillar protein and myofibrillar protein including sarcoplasmic protein (recovered protein). The peak at 1636 c $m^{-l}$ was increased with pH, and the recovered protein was unfolded in alkali pH. Difference of surface and total sulfhydryl group at pH 7.0 and 10 was comparative high, and decrease of surface sulfhydryl group indicated formation of S-S bonds. Mackerel and frozen blackspotted croaker in alkaline pH showed bands of polymerized myosin heavy chain on SDS-PAGE pattern. The transition temperatures of recovered protein were 33.1, 44.3 and 65.5$^{\circ}C$. Gelation of recovered protein from alkali processing was estimated by increase of $\beta$-sheet structure by pH treatment, S-S bonds by oxidation of surface sulfhydryl group in heating, polymerization of myosin heavy chain in order.r.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.661-665
• /
• 2013

Effect of organic acid on the preparation of indium-oxalate salt from indium scraps generated from ITO glass manufacturing process was studied. Effects of parameters, such as type and concentration of organic acids, pH of reactant, temperature, reaction time on indium-oxalate salt preparation were examined. The impurity removal efficiency was similar for both oxalic acid and citric acid, but citric acid did not make organic acid salt with indium. The optimum conditions were 1.5 M oxalic acid, pH 7, $80^{\circ}C$, and 6 hours. On the other hand, the recoveries increased with pH, but the purity decreased. The indium-oxalate salt purity prepared by two cycles was 99.995% (4N5). The indium-oxalate salt could be converted to indium oxide and indium metal by substitution reaction and calcination.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.333-341
• /
• 1988

The bio-electrode for cytosine has been constructed by immobilizing Proteus mirabilis and Citrobacter freundii on an ammonia gas-sensor. Bacteria containing cytosine deaminase convert one molecule of cytosine into one molecule of ammonia. The Proteus mirabilis bacterial electrode showed linear response to cytosine concentration in the $1.0{\times}10^{-3}\;-\;5.0{\times}10^{-2}$M with a slope of 45-48 mV/decade in 0.2 M phospbate buffer solution at pH 8.4. The Citrobacter freundii bacterial electrode showed linear response to cytosine concentration in the $7.0{\times}10^{-5}\;-\;7.0{\times}10^{-3}$M with a slope of 48 mV/decade in 0.05M phosphate buffer solution at pH 7.6. These electrode were investigated for the effects of pH, temperature, buffer solutions, amounts of bacteria, interferences, inorganic salts and lifetime.

• Applied Chemistry for Engineering
• /
• v.35 no.3
• /
• pp.230-238
• /
• 2024

In the present work, the interaction of lipid-based zwitterionic surfactant CDP-W with the vesicle membrane of phospholipids was investigated. For this purpose, interfacial properties such as critical micelle concentration (CMC) and surface tension were measured for the zwitterionic surfactant CDP-W and lecithin S100-3. The zeta potential of 1 wt% aqueous surfactant solutions was also measured as a function of pH to determine the iso-electric point of CDP-W surfactant, where the characteristic of CDP-W surfactant changes from a cationic surfactant to an anionic surfactant. Based on the iso-electric point measurement of CDP-W surfactant, the effects of pH change and CDP-W addition on the stability of S100-3 liposome systems were studied, such as average particle size, polydispersity index (PDI), and zeta potential. The effect of CDP-W on the fluidity characteristics of liposome membranes such as fluorescence anisotropy ratio, deformability, and melting point was investigated at pH 6 where the most stable liposomes were prepared to understand the effect of the fluidity of the liposome membrane on the encapsulation efficiency of active materials and the stability of liposome systems.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.103-110
• /
• 2003

The regulation of pyrimidine nucleotide synthesis has been proved to be controlled by a regulatory protein PyrR-mediated attenuation in the Gram-positive bacteria. After several bacterial genome sequencing projects, we have discovered the PyrR orthologues in the databases for Haemophilus influenzae and Synechocystis and sp. PCC6803 genome sequences. To investigate whether these PyrR orthologue proteins regulate pyrimidine nucleotide synthesis as well as the cases of Bacillus, the PyrR regions of each strains were amplified by PCR and cloned with pUC19 or T-vector in Escherichia coli and with a shuttle vector pHPS9 for E. coli and B. subtilis. For the regulation test of the PyrR orthologues, the aspartate-transcarbamylase (ATCase) assay was carried out. From the results of the ATCase assay, it was confirmed that Synechocystis sp. PCC6803 could not restore by pyrimidines to a B. subtilis, PyrR but H. influenzae PyrR could. For Purification of PyrR orthologue proteins, PyrR orthologue genes were cloned into the expression vector (pET14b). Over-expressed product of PyrR orthologue genes was purified and analyzed by the SDS-PACE. The purified PyrR orthologue proteins from H. influenzae and Synechocystis sp. PCC6803 turned out to be molecular mass of 18 kDa and 21 kDa, respectively. The result of uracil phosphoribosyl transferase (UPRTase) assay with purified PyrR orthologue proteins showed that H. influenzae PyrR protein only has UPRTase activity. In addition, we could predict several regulatory mechanisms that PyrR orthologue proteins regulate pyrimidine de novo synthesis in bacteria, through phylogenetic analysis for PyrR orthologue protein sequences.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.808-813
• /
• 2015

Boron is difficult to be removed from seawater by simple RO (reverse osmosis) membrane process, because the size of boric acid ($B(OH)_3$), the major form of aqueous boron, is as small as the nominal pore size of RO membrane. Thus, the complexation of boric acid with polyols was suggested as an alternative way to increase the size of aqueous boron compounds and the complexation behavior was investigated with Raman spectroscopy. As a reference, the Raman peak for symmetric B-O stretching vibrational mode both in boric acid and borate ion (${B(OH)_4}^-$) was selected. A Raman peak shift ($877cm^{-1}{\rightarrow}730cm^{-1}$) was observed to confirm that boric acid in water is converted to borate ion as the pH increases, which is also correctly predicted by frequency calculation. Meanwhile, the Raman peak of borate ion ($730cm^{-1}$) did not appear as the pH increased when polyols were applied into aqueous solution of boric acid, suggesting that the boric acid forms complexing compounds by combining with polyols.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.290-296
• /
• 1998

Interspecific hybrids between Aspergillus oryzae var. oryzae and Penicillium chrysogenum (Tyr$\^$-/), high alkaline protease producing fungi, were obtained by nuclear transfer technique. Nuclei isolated from the wild type Aspergillus oryzae var. oryzae strain were transferred into auxotrophic Penicillium chrysogenum mutants and selected the new strains showing an increased protein degrading capability. Maximum production of protoplasts were obtained by 1% Novozym 234 at $30^{\circ}C$ for 3 hours and the most effective osmotic stabilizers for the isolation of protoplasts were 0.6M KCl. Frequencies of hybrid formation by nuclear transfer were 1.3${\times}$10$\^$-3/∼2.8${\times}$10$\^$-3/. They could be suggested as an aneuploid by the observation of genetic stability, conidial size, DNA content, and nuclear strain. The hybrids showed 1.1～2.2 fold higher alkaline pretense activities than parental strains.

• Korean Journal of Microbiology
• /
• v.33 no.1
• /
• pp.31-37
• /
• 1997

Intergeneric hybrids between Aspergillus niger and Perricillium ch~y.sop~um(Tyr ), hyperlipolytic enzyne-producing fungi, were obtained by nuclear transfer technique:. Optimal conditions for formation of intergeneric hybrids were investigated. Maximum production of protoplasts were obtainrd by 1% Novozym 234 at $30^{\circ}C$ for 3 hrs and the most effective osmotic stabilizers for the isolation of protoplasts were 0.6 M KC]. Frequencies of hybrid formation by nuclear transfer were $1.3{\times}$10^{-3}$$ $-3.8{\times}$10^{-3}$$. From the chervation of genetic stability, conidial size, DNA content, ;md nuclear stain, it was suggested that their karyotypes are aneuploid. The hybrids showed 1.4-2.2 fold higher lipase activities than parental strains. It was strongly supported by results of this study that nuclear transfer technique is much more efficient in the formation of intergeneric hybrids than protoplast fusion and is very useful for the improvement of strains.