• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.87-95
• /
• 2000

The two eigenvalues (elastic critical load and natural frequency of lateral vibration) of sinusoidally tapered bats with simply supported ends were determined by the finite element method. For the convenience of structural engineers who are engaged in the structural design or vibration analysis of tapered beam-columns, eigenvalue coefficients were expressed by simple algebraic equations. The validity of each algebraic equation was confirmed by the value of unity for each correlation coefficient. The influence of axial thrust on the lateral vibration frequency was also investigated. For this purpose, the axial thrust was increased successively and the corresponding frequency was calculated. The approximate linear relationship between the axial thrust and the square of the frequency was confirmed lot each of the tapered members.

• Corrosion Science and Technology
• /
• v.11 no.1
• /
• pp.9-14
• /
• 2012

The formation of the Fe-Al inhibition layer in hot-dip galvanizing is a confusing issue for a long time. This study presents a characterization result on the inhibition layer formed on C-Mn-Cr and C-Mn-Si dual-phase steels after a short time galvanizing. The samples were annealed at $800^{\circ}C$ for 60 s in $N_{2}$-10% $H_{2}$ atmosphere with a dew point of $-30^{\circ}C$, and were then galvanized in a bath containing 0.2 %Al. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) was employed for characterization. The TEM electron diffraction shows that only $Fe_{2}Al_{5}$ intermetallic phase was formed. No orientation relationship between the $Fe_{2}Al_{5}$ phase and the steel substrate could be identified. Two peaks of Al 2p photoelectrons, one from metallic aluminum and the other from $Al^{3+}$ ions, were detected in the inhibition layer, indicating that the layer is in fact a mixture of $Fe_{2}Al_{5}$ and $Al_{2}O_{3}$. TEM/EDS analysis verifies the existence of $Al_{2}O_{3}$ in the boundaries of $Fe_{2}Al_{5}$ grains. The nucleation of $Fe_{2}Al_{5}$ and the reduction of the surface oxide probably proceeded concurrently on galvanizing, and the residual oxides prohibited the heteroepitaxial growth of $Fe_{2}Al_{5}$.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.72-77
• /
• 2017

Purpose: Lycium ruthenicum Murr. is a nutritional food that has been used widely for treatment of heart disease, abnormal menstruation, and menopause. Methods: In this study, the crude protein, crude lipid and crude ash contents of two different Lycii fruits with different colors were investigated, and their color values, total sugar, pH, total anthocyanins and total carotenoids were analyzed. Results: Regarding crude ash, crude fat and crude protein contents, the L. barbarum showed higher in crude fat and crude protein contents than black fruits, whereas L. ruthenicum showed higher contents than black fruits. Regarding mineral composition, mineral contents were in the other of K, Mg, Mn, Na, Zn, and Fe. The K content was high in all of the samples, and the contents of Cr and Cu were not measured. The pH values of L. ruthenicum and L. barbarum were $5.00{\pm}0.01$ and $5.08{\pm}0.02$, respectively. The total sugar content of L. ruthenicum was 45.45% while that of L. barbarum was 45.43%. Ascorbic acid content of L. barbarum was $50.86{\pm}3.63%$ while that of L. ruthenicum was $6.3{\pm}1.40%$. The total anthocyanin content of L. ruthenicum was $462.22{\pm}0.41mg/100g$, although no anthocyanin was detected in L. barbarum. The total carotenoids content was $812.25{\pm}6.01mg/100g$ in L. barbarum, although that of L. ruthenicum was not measured. Conclusion: The results from this study indicate that there is a large difference in the composition of functional ingredients of L. ruthenicum and L. barbarum. There is a strong possibility of L. ruthenicum to be developed into color food sources.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.426-431
• /
• 2016

The Fe-Cr-Al alloy system shows an excellent heat resistance because of the formation of an $Al_2O_3$ film on the metal surface in an oxidizing atmosphere at high temperatures up to $1400^{\circ}C$. The Fecralloy needs an additive that can act as a binder because of its bad compactability. In this study, the green compacts of STS434L and Al powder added to Fecralloy are oxidized at $950^{\circ}C$ for up to 210 h. Fecralloy and Al is mixed by two types of ball milling. One is vented to air and the other was performed in a sealed jar. In the case of Al addition, there are no significant changes in the electrical resistance. Before the oxidation test, Al oxides are present in the Fecralloy surface, as determined from the energy dispersive spectroscopy results. The addition of Al improves the compactability because of an increased density, and the addition of STS434L increases the electrical resistivity by forming a composite oxide.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.15-25
• /
• 1996

This study is to measure and compare the hardness and tensile strength of each time after we recast seven times continually only with and metal alloy Chromium-Cobalt alloy used in the production of partial denture frame work. The result of the experiment were as follow; 1) The result of the hardness measurement The result of the first casting was $490.48{\pm}38.38$ and that of the second recasting was $455.18{\pm}35.61$ and form the third recasting. the result were $518.38{\pm}37.68$ and over. The change of the hardness difference between each recasting was as follow; The hardness difference between the first casting and the second recasting was $35.25{\pm}31.93$ and that between the second recasting and the third recasting was $63.20{\pm}54.02$. There was a statistically significant difference(P<0.01) in the above hardness, however, there was little difference on the whole. And after the third recasting, the hardness grew high a little bit. That is why low-melting metals such as Cr, Mn, Cu of alloy ingredient was evaporated or there was an effect of changes in metal crystal structure, I suppose. 2) The result of the tensile strength measurement. There was a statistically significant difference(P<0.01) between the first casting and the second, the fourth recasting, however. there was little difference in general.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.7
• /
• pp.522-527
• /
• 2013

In this paper, We studied the change of surface and variation of elements on both electrodes of hydrogen generator of alkaline electrolysis in use of FE-SEM and SIMS. We used the stainless steel 316(600 ${\mu}m$) as electrode in condition of 25%KOH, $60^{\circ}C$ Temperature. The results show that the intensity of elements (C, Si, P, S, Ti, Cr, Mn, Fe, Ni, Mo) of Positive Electrode are decreased as much as about $10^1{\sim}10^3 $than the original electrode. Thickness of Positive Electrode is decreased about 40 ${\mu}m$ after chemical reaction. The negative electrode, however, shows a slight variation in the intensity of elements (C, Si, P, Fe, Ni, Mn, Mo) but Change of thickness and surface' shape of electrode show nothing after chemical reaction. The change in thickness and variation of Stainless Steel 316 cause the lifetime of electrode to be shorted. We also observed hydrogen, oxygen, potassium in both electrodes. Especially, The potassium is increased in proportional with depth of positive electrode. this means the concentration of alkali solutions is changed. and so we have to supply alkaline solution to generator in order to produce same quantity of hydrogen gas continuously. we hope that this study gives a foundation to develop the electrode for hydrogen generator of alkaline electrolysis.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.15-22
• /
• 1999

This study investigated the mordanting effect of natural mordants such as camellia ash, bean chaff ash and pyrolignite of iron(Iron(II) Acetate) on silk fabrics dyed with green tea extracts. Experimental variables include the conditions of extraction and dyeing, and types of natural mordants. Inorganic ion contents In natural mordants were analysed by Induced Coupled Plasma Atomic Emission Spectrometer. In the ash Al, Fe, Si and Mn were in % unit, Cr and Ni were detected in ppm unit, and in the aqueous extracts of the ash all the metal ions were in ppm unit. On the other hand, fairly high content of Al(2.13% ) in camellia ash extract and Fe(7.91% ) in the aqueous extracts of pyrolignite iron were detected. The absorbance intensity of green tea extracts in UV-Visible spectrum increased with the temperature and time of extraction. The maximum absorption wavelength of the extracts appeared at 272.5nm and 210.5nm. The US values of silk fabrics dyed with green tea extracts were increased with temperature and time of dyeing. Surface color of silk fabric dyed with green tea extracts was 9.1YR, but it was changed from 7.9YR to 7.5YR by camellia ash extract and 7.4YR to 6.4YR by bean chaff ash extract with increase in mordant concentration. Pre-mordanted and post-mordanted fabrics with pyrolignite of iron were changed from 1.4YR to 1.1R and 7.2P to 4.2P, respectively.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.325-334
• /
• 2010

Transcriptional regulation in response to salt in mutant lines was investigated using oligonucleotide microarrays. In order to characterize the salt-responsive genes in rice, the expression profiles of transcripts that responded to salt-treatment were monitored using the microarrays. In the microarray analysis, among 37,299 reliable genes, 5,101, 2,758 and 2,277 genes were up-regulated by more than 2-fold using the salt treatment, while the numbers of down-regulated genes were 4,619, 3,234, and 1,878 in the WT, ST-495, and ST-532, respectively. From genotype changes induced by gamma ray mutagenesis, 3,345 and 2,397 genes were up-regulated, while 2,745 and 2,075 genes were down-regulated more than 2-fold in the two untreated mutants lines compared with untreated WT, respectively. A total of 3,108 and 2,731 genes were up-regulated more than 2-fold, while 3,987 and 3,660 genes were down-regulated by more than 2-fold in the salt treatment of the two mutants lines compared with the salt treated WT, respectively. The expressions of membrane transporter genes such as OsAKT1, OsKUP, and OsNAC increased more severely in ST-495 and ST-532 than in the WT. The expressions of the proline accumulation related genes such as OsP5CS and OsP5CR were also markedly increased in the salt tolerant mutants when compared to the WT plant.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.283-291
• /
• 2018

Objectives: To identify the current status of smartphone usage and to describe the needs for smartphone-based cardiac telerehabilitation of cardiac patients. Methods: In 2016, a questionnaire survey was conducted in a supervised ambulatory cardiac rehabilitation (CR) program in a university affiliated hospital with the participation of heart failure or heart transplantation patients who were smartphone users. The questionnaire included questions regarding smartphone usage, demands for smartphone-based disease education, and home health monitoring systems. Results were described and analyzed according to principal diagnosis. Results: Ninety-six patients (66% male; mean age, $5{\pm}11$ years), including 56 heart failure and 40 heart transplantation patients, completed the survey (completion rate, 95%). The median daily smartphone usage time was 120 minutes (interquartile range, 60-300), and the most frequently used smartphone function was text messaging (61.5%). Of the patients, 26% stated that they searched for health-related information using their smartphones more than 1 time per week. The major source of health-related information was Internet browsing (50.0%), and the least sought source was the hospital's website (3.1%). Patients with heart failure expressed significantly higher needs for disease education on treatment plan, home health monitoring of blood pressure, and body weight (${\chi}^2=5.79$, 6.27, 4.50, p < 0.05). Heart transplantation patients expressed a significant need for home health monitoring of body temperature (${\chi}^2=5.25$, p < 0.05). Conclusions: Heart failure and heart transplantation patients show high usage of and interest in mobile health technology. A smartphone-based cardiac telerehabilitation program should be developed based on high demand areas and modified to suit to each principal diagnosis.