• Transactions on Electrical and Electronic Materials
• /
• v.5 no.2
• /
• pp.76-80
• /
• 2004

Piezoelectric and dielectric properties as functions of x and y mole ratio in yPb(ZrxTil-x)O$_3$(1-y)Pb(Mn$\_$1/3/Nb/2/3/)O$_3$, ceramics, PZT-PMN, are investigated for large displacement piezoelectric devices. From the experimental results, when y is 0.95 and x is 0.505, the piezoelectric and dielectric properties are maximum, that is, electromechanical coupling coefficient(kp), piezoelectric strain constant(d$\_$33/), permittivity($\varepsilon$$\_$33/$\^$T//$\varepsilon$$\_$0/), and Curie temperature are 58 %, 272 pC/N, 1520 and about 350$^{\circ}C$, respectively. Also, when y is 0.90 and x is 0.50, their properties are 56 %, 242 pC/N, 1220, and 290$^{\circ}C$, respectively. As MgO dopant is added from 0 wt% to 1 wt%, kp increases to 63 % and Qm decreases to 500 at the MgO dopant of 0.1 wt%, and then kp decreases to 57 % as MgO is added.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.1-8
• /
• 2002

In order to study electric properties of (Pb$\_$0.9/La$\_$0.1/)Ti$\_$0.975/O$_3$(PLT (10)) films with varying excess lead concentration (7.5, 10, 12.5, 15 ㏖% excess lead), the PLT films were deposited by sol-gel process. DTA analyses reveal that the crystallization temperature of the precursor powers decreased with increasing amount of excess lead. XRD patterns of PLT reveal pure perovskite structure and the preferred orientation increased with increasing Pb content in the films. With increasing amount of excess P$\_$b/, the relative permittivity ($\xi$$\_$r/) increased and leakage current density at 100 ㎸/cm transformed 4.01$\times$10$\^$-5/, 2.42$\times$10$\^$-6/, 1.27$\times$10$\^$-6/, 1.56$\times$10$\^$-6/A/㎠ respectively. In the results of hysteresis loops measured at 166 kV/cm, the remanent polarization (P$\_$r/) and the coercive field (E$\_$c) are 6.36$\mu$C/cm and 58.7 ㎸/cm, respectively (at 12.5 ㏖% excess P$\_$b/) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after 10$\^$9/ cycles./TEX>) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after $10^{9}$ cycles.

• Korean Journal of Microbiology
• /
• v.54 no.2
• /
• pp.113-125
• /
• 2018

Purpose of the present study was to investigate the factors affecting the production of antibacterial substances and histamine in rennet curd prepared by inoculation of histamine-producing lactic acid bacteria (LAB) and probiotic LAB. Probiotic Lactobacillus sakei PIL52 and Lactobacillus plantarum FIL20 produced strong antimicrobial agents against histamine-producing bacteria Lactobacillus brevis LAS129, Enterococcus faecium SBP12, and Enterococcus faecalis SBP58. The lactic acid and crude bacteriocin produced from the probiotic LAB inhibited histamine-producing bacteria in a concentration-dependent manner. As the number of probiotic LAB inoculated for the production of rennet curd increased, the antibacterial activity against histamine-producing bacteria was elevated due to the increased amount of lactic acid and crude bacteriocin in the sample. The growth of probiotic LAB as well as histamine-producing bacteria was inhibited by addition of 10% NaCl, thus the antibacterial substances and histamine contents in rennet curd were significantly lower than those of the control (P < 0.05). Meanwhile, the histamine content was not significantly increased when the rennet curd prepared by mixing probiotic LAB and histamine-producing bacteria was stored at $25^{\circ}C$ for 5 days. However, the amount of histamine detected in the rennet curd was significantly (P < 0.05) increased because the antibacterial activity of the bacteriocin produced by the probiotic LAB was decreased at $20^{\circ}C$ for 20 days.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.685-695
• /
• 2009

Background: Calcification is the most frequent cause of clinical failure of bioprosthetic tissues that are fabricated from Glutaraldehyde (GA)-fixed porcine valve or bovine pericardium. We recently used a multi-factorial approach of employing different mechanisms to investigate how to reduce the calcification of bioprosthetic tissues. The purpose of the present study was to evaluate the synchronized synergism using ethanol, L-lysine and $NaBH_4$ in glutaraldehyde treated porcine pericardium from the standpoint of calcification and tissue elasticity. Material and Method: Porcine pericardium was fixed with 0.625% GA (commercial fixation). An interim step of ethanol (80%; 1 day at room temperature) or L-lysine (0.1 M; 2 days at $37^{\circ}C$) or $NaBH_4$ (0.1 M; 2 days at room temperature) was followed by completion of the GA fixation (2 days at $4^{\circ}C$ and 7 days at room temperature). The tensile strength and thickness of the samples were measured. The treated pericardiums were implanted subcutaneously into three-week old Sprague-Dawley rats for 8 weeks. The calcium content was assessed by atomic absorption spectroscopy and the histology of the samples. Result: The amount of calcium in the pericardium pretreated with ethanol (13.6${\pm}$10.0 ug/mg, p=0.008), L-lysine (15.3${\pm}$1.0 ug/mg, p=0.002) and both (16.1${\pm}$11.1 ug/mg, p=0.012) was significantly reduced compared with the control (51.2${\pm}$8.5 ug/mg). However, $NaBH_4$ pretreatment (65.7${\pm}$61.8 ug/mg, p=0.653) and combined pretreatment that including ethanol, L-lysine and $NaBH_4$ (92.9${\pm}$58.3 ug/mg, p=0.288) were not significantly different from the controls(51.2${\pm}$8.5 ug/mg). Both the combined pretreatment using ethanol and L-lysine (7.60${\pm}$1.55, p=0.76) and the combined pretreatment that included ethanol, L-lysine and $NaBH_4$ (7.47${\pm}$1.85, p=0.33) increased the tensile strength/thickness ratio compared with that of the controls (4.75${\pm}$1.88). Conclusion: The combined pretreatment using ethanol and L-lysine seemed to decrease the calcification of porcine pericardium fixed with glutaraldehyde, as compared to single pretreatment, and it increase the tissue elasticity, but to the degree that showed synchronized synergism. $NaBH_4$ pretreatment seemed to increase the calcification of porcine pericardium, irrespective of whether single or combined pretreatment was used.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.31-39
• /
• 1999

This study was aimed to describe the population dynamics and secondary production of Tapes philppinarum on Chohwa and Toksan tidal flats in Kwangyang Bay, from June 1994 to July 1995. The size distributions in shell length showed bimodal patterns from June 1994 to April 1995. Thereafter the distribution changed to the passage of time, indicating an increase in shell length. The mean densities decreased gradually with month. Chohwa A sustained highestdensity, followed by Chohwa B, Toksan C, and Toksan D. The recruitment of new year class occurred first on the upper tidal flat, and then moved to the lower tidal flat. The mean biomass in flesh dry weight of each year class increased in spring just before the spawning period, and thereafter decreased progressively. Annual mean biomass wasrecorded as 170.7 g m$\^$-2/ at Chohwa A, 220.7 g m$\^$-2/ at Chohwa B, 21.8 g m$\^$-2/ at Toksan C, and 45.2 g m$\^$-2/ at toksan D. Annual productions of Ruditapes philippinarum were estimated as 259.72 g m$\^$-2/ yr$\_$-1/ at Chohwa A, 359.79 g m$\^$-2/ yr$\_$-1/ at Chohwa B, 45.02 g m$\^$-2/ yr$\_$-1/ at Toksan c, 68.88 g m$\^$-2/ yr$\_$-1/ at Toksan D. Annual productions were much higher on Chohwa tidal flat than those on Toksan tidal flat. While P:B ratio were higher on Toksan tidal flat as 1.70 than those on Chohwa tidal flat as 1.58. In conclusion, the Chohwa tidal flat showed higher biomass and producion of Ruditapes philippinarum, whereas the Toksan tidal flat showed higher P:B ratio. The total amount of potential food might influence on the density, biomass nad produciton, whereas the amount of food and space per individual might influence on the growth rate and P:B ratio.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.152-158
• /
• 2000

This study was conducted to investigate the influence of feeding illite(yellow soil component) on meat quality of pork. 40 pigs were fed with commercial formulated feed (control group) and 1% illite added feed(treatment group). Pigs grown up to 100~110kg of weight were slaughtered in commercial abattoir. After chilling for 24hours, samples were collected from M. longissimus dorsi muscle, and stored at $4\pm$$1^{\circ}C$ for analyses. The physico-chemical properties was determined during storage days as follows. Ultimate pH was not significantly different between control and treatment(pH 5.58 and 5.60, respectively). Water-holding capacity measured using filter paper press method of the treatment group was slightly higher than that of the control group. Cooking loss of treatment group were significantly lower than that of the control group at 1 and 7 days(p〈0.05). Shear force between control and treatment group was not different. L*- and a*-value were not significantly different between the two groups(p〉0.05), but b*-value of treatment group was lower than that of the control group(p〈0.05). The drip loss of all samples was increased with storage days, and that of the treatment group was significantly lower than that of the control at 1 and 3 day storage. Meat color measured using NPPC pork quality standards was not significantly different between the two groups(p〉0.05), but marbling content of the treatment group was significantly higher than that of the control group(p〈0.05). Sensory characteristics of, flavor taste and tenderness did not show significant differences(p〉0.05), but juiciness of the treatment group showed higher value than that of the control group(p〈0.05)

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.309-321
• /
• 2002

In this study, the characteristics of Jeung-pyun hatter were investigated by wine yeast. The processing conditions were optimized by physicochemical characterization including pH, volume, reduced sugar. The effect of yeast concentration, moisture content on the fermentation time and temperature were investigated in view of improving productivity. It was found that the volume was increased at maximum state when the fermentation was carried out at 35 $^{\circ}C$ with 0.1% yeast concentration 60% of moisture. The quality of Jeung-Pyun was most preferable in the condition of 0.1% wine yeast(Pasteur Red) for 8 hrs at 35$^{\circ}C$.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.47-58
• /
• 1998

The purpose of this study was to investigate an influence of the change of central panoramic curves on the image reconstruction in the dental implant CT. The author designed three experimental groups according to the location of central panoramic curve. In group A, central panoramic curve was determined as the curve connecting the center of roots from the first premolar to the first molar. In group B, central panoramic curve was determined as the line connecting the lingual cortical plate at the level of the mesial aspect of the first premolar with the buccal cortical plate at the level of the mesial aspect of the first molar. In Group C, central panoramic curve was determined as the line connecting the buccal cortical plate at the level of the mesial aspect of the first premolar with the lingual cortical plate at the level of the mesial aspect of the first molar. Twenty four reformatted CT images was acquired from four mandibles embedded in the resin block and twenty four contact radiographs of dog specimens were acquired. Each Image was processed under Adobe Photoshop program analysed by MSPA(mandible/maxilla shape pattern analysis) variables such as MXVD, MXHD, UHD, MHD, and LHD. The obtained results were as follows ; 1. The mean of MXVD variable was 19.9, 20.2, and 20.0 in group A, B, and C, respectively, which were smaller than actual value 20.5. But, there was no significant difference among 3 groups (p>0.05). 2. The mean of MXHD, UHD, MHD, and LHD variables in group A, B, and C was 11.9, 12.2, and 12.3; 9.3, 9.5, and 9.6; 10.0, 10.3, and 10.3; 9.2, 9.3, and 9.4 respectively which were equal to or greater than the actual value 11.8, 9.3, 10.0, and 9.2. But, there was no significant difference among 3 groups (p>0.05). 3. The number of noneffective observations with difference over or under 1 mm with comparison to the actual value was 24(20％), 58(48.3％), and 52(43.3％), respectively, in group A, B, and C. 4. In group A, the number of observations over 1 mm and under 1 mm was 9 and 15, respectively, but in group Band C, the number of observations over 1 mm was more than under 1 mm.

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.279-284
• /
• 2004

A rust fungus has caused a serious early defoliation of Zanthoxylum schinifolium during growing seasons every year at the plantations located at Hadong and Jinju, Kyeongsangnam-Do in Korea. In order to identify the rust fungus and clarify its life cycle in Korea, aeciospores from Pinus thunbergii were artificially inoculated on the leaves of Z. schinifolium. Uredinial stage was successively formed on the leaves of Z. schinifolium. Based on the artificial inoculation test and on the morphological features of the dried specimens collected from P. thunbergii and Z. schinifolium, this rust fungus was identified as Coleosporium xanthoxyli. Morphological features of aecial and uredinial stages of the species were described. The first symptom of the infection was developed from later June to early July. And leaf infection ratio was 17.8%-58.7% during August at Hadong and Jinju regions of Kyeongsangnam-Do in Korea.

• Wind and Structures
• /
• v.37 no.6
• /
• pp.425-444
• /
• 2023

This study is to investigate the effect of interference between two C-shaped high-rise buildings by computational fluid dynamics (CFD), focusing on the variation of the local pressure coefficient (C_P) and the mean pressure coefficient (C_PMEAN). Sixteen building position cases are considered for the present study. These cases were based on the position and height of the interference building (IB). The pressure coefficient (C_P) is calculated on the principal building (PB) and is compared with an isolated building identical in shape and size. The interference effect on PB has also been presented in reference for the interference factor (IF). According to the findings, the maximum force coefficient on the PB is 0.971 and it is 10.97% more than the isolated PB when IB is located at position 2b (two times the width of the building), and the interfering height of 13H/15 mm. The moment coefficient on PB is 1.27, which is 27.36% less than the isolated case in which IB pushed 2b to 3b in the y direction with 750 mm height. In most of the cases, because of the shielding effect of the IB, the value of force coefficient (C_F) on PB has been reduced. On the face of the PB, there are also considerable differences in the mean pressure coefficient C_PMEAN. When IB was positioned at a location of 2b in Y direction and an interfering height of 13H/15 mm, the maximum C_PMEAN (1.58) was observed on the leeward face of PB.