• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.9-14
• /
• 2017

$ISnO_2$ thin films were prepared on p-type and n-type Si substrates to research the interface characteristics between $SnO_2$ and substrate. After the annealing processes, the amorphous structure was formed at the interface to make a Schottky contact. The O 1s spectra showed the bond of 530.4 eV as an amorphous structure, and the Schottky contact. The analysis by the deconvoluted spectra was observed the drastic variation of oxygen vacancies at the amorphous structure because of the depletion layer is directly related to the oxygen vacancy. $SnO_2$ thin film changed the electrical properties depending on the characteristics of substrates. It was confirmed that it is useful to observe the Schottky contact's properties by complementary using the XPS analysis and I-V measurement.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.43-48
• /
• 2017

SnO:Sn(80:20 mol%) 혼합 타겟을 이용한 RF 반응성 스퍼터링으로 투명하고 전도성이 있는 $Sn_xO_y$ 박막을 증착하였다. 혼합 타겟은 화학적으로 안정한 조성과 높은 투과도를 주는 세라믹 타겟과 Sn과 산소의 반응성 증착으로 박막내 구조적 결함 조절이 용이한 금속 타겟의 장점을 고루 택하고 있다. 산소 분압 0%~12% 구간에서 박막을 증착하였으며, 증착 후 $300^{\circ}C$에서 1시간 동안 진공 열처리를 진행하였다. Sn 함량이 많은 $P_{O2}=0%$의 경우를 제외하고 모든 시편들은 열 처리 전후에 80~90% 이상의 투과도를 보였으며, 안정된 p형 $Sn_xO_y$ 박막은 $P_{O2}=12%$에서 확인하였고, $P_{O2}=12%$에서 열 처리 후 캐리어 농도와 이동도는 각각 $6.36{\times}10^{18}cm^{-3}$와 $1.02cm^2V^{-1}s^{-1}$ 이었다.

• 대한전자공학회논문지
• /
• 제14권1호
• /
• pp.15-22
• /
• 1977

자색광에 민감한 태양전지연구의 일환으로 우선 이러한 성질을 띤 광전지를 얻게 되었다. 이 광전지는 SnO2-SiO2-SiMOS와 Si n-p 동질접합이 결합된 구조로 되어 있다. 광전출력(0.25V, 150㎂)이 적어서 태양전지용은 못되지만 Si p-n 동질접합으로 된 태양전지에 비해서 분광감도가 자와선대쪽으로 이동되어 있고 switching 속도도 상당히 큰 고로 종래의 Si 광전지보다 더많은 새로운 용도를 찾아낼 수 있을 것으로 기대되고 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.272-272
• /
• 2014

SnO thin films, 100 nm in thickness, were deposited on glass substrates by RF magnetron sputtering. A stack structure of $SnO_2/SnO$, where few nanometers of $SnO_2$ were determined on the SnO thin film by X-ray photoelectron spectroscopy. In addition, XPS depth profile analysis of the pristine and heat treated thin films were introduced. The electrical behavior of the as-sputtered films during the annealing was recorded to investigate the working conditions for the SnO sensor. Subsequently, The NH3 sensing properties of the SnO sensor at operating temperature of $50-200^{\circ}C$ were examined, in which the p-type semiconducting sensing properties of the thin film were noted. The sensor shows good sensitivity and repeatability to $NH_3$ vapor. The sensor properties toward several gases like $H_2S$, $CH_4$ and $C_3H_8$ were also introduced. Finally, a sensing mechanism was proposed and discussed.

• 대한전자공학회논문지
• /
• 제13권2호
• /
• pp.23-27
• /
• 1976

p형과 n형 Si wafer의 111면위에 5x10-5mmHg의 진공내에서 SnO2-x박막을 Flash증착법으로 성장시킨 다음 산소분위기 속에서 열처리하여 Si-SnO2 heterojunction을 만들고 물성측정으로 부터 Energy bnad profile을 구하였다. 이 heterojunction은 양호한 정류성 Junction이며 400nm부터 1200nm까지 분광감도를 갖고 시정수가 -10-18sec로 고속광소자로 적합하며 Si p-n homojunction solar cell에 비하여 특성이 우수하고 제작이 간단하기 때문에 태양전지로 사용해도 손색이 없다. Si-SnO2 heterojunction was prepared by oxidzing at oxygen atmosphere SnO2-x Which made by Flith evaporation of SnO2 powder on III surface of p and n type Si single crystals. The energy band Profile of Si·SnO2 heterojunction was depicted from its physical properties. This heterojunction was very good rectifying junction, very sensitive in spectral response of Photovoltage at from 400nm to 1200nm, and -10-8sec of time contant. From above properties, this heterojunction was found ps good high speed photovoltaic device and solar cell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.265.1-265.1
• /
• 2016

여러 application에 적용하기 위하여 p-type SnO 박막과 전극 간의 접촉 저항을 분석이 필요하였다. 이를 Transmission Line Method(TLM) 패턴 소자를 제작한 후 전기적 특성을 분석함으로써 알 수 있었다. $Si/SiO_2$ 기판에 Reactive Magnetron Sputtering법을 이용하여 c축 우선 배향된 SnO를 100nm 증착하고 photolithography 공정을 통해 전극을 패턴화하여 100nm 두께로 증착하였다. 전극 간 거리는 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, $1024{\mu}m$로 각각 2배씩 증가하는 패턴이고 폭 W는 $300{\mu}m$ 이다. p-type SnO 의 경우, work function이 4.8eV이기 때문에 전극과 ohmic contact이 되기 위해서는 4.8eV보다 높은 work function 값을 가지는 전극이 필요하였다. 이 조건과 맞는 후보로 Ni(5.15eV), ITO(5.3eV)를 설정한 후 소자를 제작하였다. 제작된 소자는 열처리 하지 않은 소자와 Rapid Thermal Annealing(RTA) 장비에서 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$에서 각각 1분씩 열처리한 소자의 특성을 분석하였다. 열처리 하지 않은 소자의 경우 Ni 전극의 specific contact resistance는 $3.42E-2{\Omega}$의 값을 나타내었고, ITO의 경우 $3.62E-2{\Omega}$값을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.99-99
• /
• 2014

Transparent oxide semiconductors (TOSs) are. currently attracting attention for application to transparent electrodes in optoelectronic devices and active channel layers in thin-film transistors. One of the key issues for the realization of next generation transparent electronic devices such as transparent complementary metal-oxide-semiconductor thin-film transistors (CMOS TFTs), transparent wall light, sensors, and transparent solar cell is to develop p-type TOSs. In this talks, I will introduce issues and status related to p-type TOSs such as LnCuOQ (Ln=lanthanide, Q=S, Se), $SrCu_2O_2$, $CuMO_2$ (M=Al, Ga, Cr, In), ZnO, $Cu_2O$ and SnO. The growth and properties of SnO and Cu-based oxides and their application to electronic devices will be discussed.

• 마이크로전자및패키징학회지
• /
• 제21권1호
• /
• pp.13-17
• /
• 2014

The direct-patternable $SnO_2$ thin film was successfully fabricated by photochemical metal-organic deposition. The composition and chemical bonding state of $SnO_2$ thin film were analyzed by using X-ray photoelectron spectroscopy (XPS) from the surface to the interface with Si substrate. XPS depth profiling analysis allowed the determination of the atomic composition in $SnO_2$ film as a function of depth through the evolution of four elements of C 1s, Si 2p, Sn 3d, and O 1s core level peaks. At the top surface, nearly stoichiometric $SnO_2$ composition (O/Sn ratio is 1.92.) was observed due to surface oxidation but deficiency of oxygen was increased to the interface of patterned $SnO_2/Si$ substrate where the O/Sn ratio was about 1.73~1.75 at the films. This O deficient state of the film may act as an n-type semiconductor and allow $SnO_2$ to be applied as a transparent electrode in optoelectronic applications.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.68-74
• /
• 2018

All transparent UV photodetector based on ZnO was fabricated with structure of NiO/ZnO/$SnO_2$/ITO by using RF and DC magnetron sputtering system. ZnO was deposited with 4 inch ZnO target (purity 99.99%) for a quality film. In order to build p-n junction up, p-type NiO was formed on n-type ZnO by using reactive sputtering method. The indium tin oxide (ITO) which is transparent conducting oxide (TCO) was applied as a transparent electrode for transporting electrons. To improve the UV photodetector performance, a functional $SnO_2$ layer was selected as an electron transporting and hole blocking layer, which actively controls the carrier movement, between ZnO and ITO. The photodetector (NiO/ZnO/$SnO_2$/ITO) shows transmittance over 50% as similar as the transmittance of a general device (NiO/ZnO/ITO) due to the high transmittance of $SnO_2$ for broad wavelengths. The functional $SnO_2$ layer for band alignment effectively enhances the photo-current to be $15{\mu}A{\cdot}cm^{-2}$ (from $7{\mu}A{\cdot}cm^{-2}$ of without $SnO_2$) with the quick photo-responses of rise time (0.83 ms) and fall time (15.14 ms). We demonstrated the all transparent UV photodetector based on ZnO and suggest the route for effective designs to enhance performance for transparent photoelectric applications.