• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.93-100
• /
• 2008

고온 발전용 열전모듈을 p-type으로는 $Ca_{2.7}Bi_{0.3}Co_4O_9$, n-type으로는 $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$을 선택하고 알루미나 기판 위에 1쌍과 2쌍을 제조하였다. 산화물 열전 모듈의 최적화 설계를 위해 먼저 1쌍의 열전모듈의 실험 결과로부터 전극의 접촉저항을 산출하여 2쌍 모듈에 적용함으로써 저항과 출력 특성을 예측하였다. 예측된 2쌍 모듈의 계산 값과 제조된 2쌍 모듈의 실측 값을 비교함으로써 모듈 설계를 위한 접근방법을 검토하였다. 2쌍 모듈의 계산된 저항과 측정된 저항은 각각 $T_h$=833 K에서 0.954 $\Omega$과 1.105 $\Omega$으로 약 0.15 $\Omega$ 정도의 차이로 근접한 결과를 얻었으며, 제시된 방법으로 고온산화물 열전 모듈 제작에 유효하다고 판단된다.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.17-26
• /
• 2013

In contrast to conventional crystalline cells, back-contact solar cells feature high efficiencies, simpler module assembly, and better aesthetics. The highest commercialized cell and module efficiency was recorded by n-type back-contact solar cells. However, the mainstream PV industry uses a p-type substrate instead of n-type due to the high costs and complexity of the manufacturing processes in the case of the latter. P-type back-contact solar cells such as metal wrap-through and emitter wrap-through, which are inexpensive and compatible with the current PV industry, have consequently been developed. In this paper the characteristics of EWT (emitter wrap-through) solar cells and their status and prospects for development are discussed.

• Clinical and Experimental Reproductive Medicine
• /
• 제46권3호
• /
• pp.125-131
• /
• 2019

Objective: To investigate serum 25-hydroxyl vitamin D (25(OH)D) and vitamin D-binding protein (VDBP) concentrations in women with endometriosis according to the severity of disease. Methods: Women with mild endometriosis (n = 9) and advanced endometriosis (n = 7), as well as healthy controls (n = 16), were enrolled in this observational study. Serum total 25(OH)D concentrations were analyzed using the Elecsys vitamin D total kit with the Cobas e602 module. Concentrations of bioavailable and free 25(OH)D were calculated. Concentrations of VDBP were measured using the Human Vitamin D BP Quantikine ELISA kit. Variables were tested for normality and homoscedasticity using the Shapiro-Wilk test and Leven F test, respectively. Correlation analysis was used to identify the variables related to total 25(OH)D and VDBP levels. To assess the effects of total 25(OH)D and VDBP levels in the three groups, multivariate generalized additive modeling (GAM) was performed. Results: Gravidity and parity were significantly different across the three groups. Erythrocyte sedimentation rate (ESR) and CA-125 levels increased as a function of endometriosis severity, respectively (p= 0.051, p= 0.004). The correlation analysis showed that total 25(OH)D levels were positively correlated with gravidity (r = 0.59, p< 0.001) and parity (r = 0.51, p< 0.003). Multivariate GAM showed no significant relationship of total 25(OH)D levels with EMT severity after adjusting for gravidity and ESR. However, the coefficient of total 25(OH)D levels with gravidity was significant (1.87; 95% confidence interval, 0.12-3.63; p= 0.040). Conclusion: These results indicate that vitamin D and VDBP levels were not associated with the severity of endometriosis.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.281-284
• /
• 2007

Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules ($>300cm^2$), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% ($Area=305cm^2$, Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, $SHG-YVO_4$ (${\lambda}=0.532{\mu}m$) and YAG (${\lambda}=1.064{\mu}m$). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.28-34
• /
• 2018

The purpose of this study is to fabricate a sensor module to detect the resistive leakage current (Igr) in real time that occurs to low voltage electric lines and to verify its reliability. In the case of the developed sensor module, wires are inserted into the zero current transformer (ZCT) and current transformer (CT) in advance and then the branch line is connected to the circuit breaker. The measurement result of the resistance of the distribution panel equipped with the developed sensor module shows that the resistance is $0.151m{\Omega}$ between the R and R phases, $0.169m{\Omega}$ between the S and S phases, and $0.178m{\Omega}$ between the T and T phases, respectively. The insulation resistance measured at AC 500 V and 1,000 V is $0.08m{\Omega}$ between the R, S, T and N phases, respectively. Then, the insulation resistance measured at DC 500 V is $83.3G{\Omega}$ between the R, S, T and G terminal, respectively. In addition, the applied withstanding voltage is AC 220 V/380 V/440 V and it was found that characteristics between all phases are good. This study measured the standby power by installing the developed sensor module at the rear of the MCCB and switching the circuit breaker on sequentially. The standby power is 1.350 W when one circuit breaker is turned on, 1.690 W when 2 circuit breakers are turned on, and 4.371 W when 10 circuit breakers are turned on. This study also verified the reliability of the standby power of the distribution panel equipped with the developed sensor module using the Minitab Program (Minitab PGM). Since the analysis shows the statistical average of 1.34627 in the reliable range of normal distribution, standard deviation of 0.001874, AD of 0.554, and P value of 0.140, it is found that the distribution panel equipped with the developed sensor module has high reliability.

• 대한수학회지
• /
• 제58권3호
• /
• pp.643-702
• /
• 2021

Fix ℤ/2 is the prime field of two elements and write 𝒜₂ for the mod 2 Steenrod algebra. Denote by GL_d := GL(d, ℤ/2) the general linear group of rank d over ℤ/2 and by ${\mathfrak{P}}_d$ the polynomial algebra ℤ/2[x₁, x₂, …, x_d] as a connected unstable 𝒜₂-module on d generators of degree one. We study the Peterson "hit problem" of finding the minimal set of 𝒜₂-generators for ${\mathfrak{P}}_d$. Equivalently, we need to determine a basis for the ℤ/2-vector space $$Q{\mathfrak{P}}_d:={\mathbb{Z}}/2{\otimes}_{\mathcal{A}_2}\;{\mathfrak{P}}_d{\sim_=}{\mathfrak{P}}_d/{\mathcal{A}}^+_2{\mathfrak{P}}_d$$ in each degree n ≥ 1. Note that this space is a representation of GL_d over ℤ/2. The problem for d = 5 is not yet completely solved, and unknown in general. In this work, we give an explicit solution to the hit problem of five variables in the generic degree n = r(2^t - 1) + 2^ts with r = d = 5, s = 8 and t an arbitrary non-negative integer. An application of this study to the cases t = 0 and t = 1 shows that the Singer algebraic transfer of rank 5 is an isomorphism in the bidegrees (5, 5 + (13.2⁰ - 5)) and (5, 5 + (13.2¹ - 5)). Moreover, the result when t ≥ 2 was also discussed. Here, the Singer transfer of rank d is a ℤ/2-algebra homomorphism from GL_d-coinvariants of certain subspaces of $Q{\mathfrak{P}}_d$ to the cohomology groups of the Steenrod algebra, $Ext^{d,d+*}_{\mathcal{A}_2}$ (ℤ/2, ℤ/2). It is one of the useful tools for studying these mysterious Ext groups.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.360-364
• /
• 2013

The maximum breakdown voltage's characteristic within the Super Junction MOSFET structure comes from N-Drift and P-Pillar's charge balance. By developing P-Pillar from Planar MOSFET, it was confirmed that the breakdown voltage is improved through charge balance, and by setting the gate voltage at 10V, the characteristic comparisons of Planar MOSFET and Super Junction MOSFET are shown in picture 6. The results show that it had the same breakdown voltage as Planar MOSFET which increased temperature resistance by 87.4% at $.019{\Omega}cm^2$ which shows that by the temperature resistance increasing, the power module's power dissipation improved.

• 중환자간호학회지
• /
• 제6권1호
• /
• pp.21-33
• /
• 2013

Purpose: The purpose of this study was to examine the relationship between lymphedema self-care management and quality of life in breast cancer patients with mastectomy and lymphedema. Methods: One hundred and eighty-six breast cancer patients with mastectomy and lymphedema (n=186) were recruited at a medical center located in Seoul. The levels of lymphedema self-care management and quality of life were measured by the scale for measurement of practice in lymphedema self-care management, European Organization for Research and Treatment of Cancer-Quality of Life Core 30 (EORTC QLQ-C30) and European Organization for Research and Treatment of Cancer-Quality of Life Questionnaire Breast Cancer Module (EORTC QLQ BR23), respectively. Data were analyzed with SPSS 18.0 program. Results: There were statistically significant correlations between lymphedema self-care management and general health status/quality of life in mastectomy patients with lymphedema (r=.30, p<.001). The physical function score of cancer related function scale (r=-.15, p=.033), fatigue score of cancer related symptom scale (r=.15, p=.036), systemic side effect score of breast cancer related symptom scale (r=.45, p=.034), and upset by hair loss (r=.27, p=.004) were significantly correlated with quality of life. Conclusion: The findings suggest that these significant factors should be considered when caring for lymphedema patients.

• Environmental Engineering Research
• /
• 제10권5호
• /
• pp.247-256
• /
• 2005

A combination of the submerged membrane activated-sludge bioreactor(SMABR) equipped with non-woven fabric filter and oyster-zeolite (OZ) packed-bed adsorption column was studied to evaluate the advanced tertiary treatment of nitrogen and phosphorous. The non-woven filter module was submerged in the MBR and aeration was operated intermittently for an optimal wastewater treatment performance. Artificial wastewater with $COD_{Cr}$ of 220 mg/L, total nitrogen (T-N) of 45 mg/L, and total phosphorous (T-P) of 6 mg/L was used in this study. MLSS was maintained about $4,000\;{\sim}\;5,000\;mg/L$ throughout the experiments. The experiments were performed for 100-day with periodic non-woven filter washing. The results showed that $COD_{Cr}$ could be effectively removed in SMABR alone with over 94% removal efficiency. However, T-N and T-P removal efficiency was slightly lower than expected with SMABR alone. The permeate from SMABR was then passed through the OZ column for tertiary nutrients removal. The final effluent analysis confirmed that nutrients could be additionally removed resulting in over 87% and 46% removal efficiencies for T-N and T-P, respectively. The results of this study suggest that the waste oyster-shell can be effectively reclaimed as an adsorbent in advanced tertiary wastewater treatment processes in combination with SMABR equipped with non-woven fabric filter.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.352-359
• /
• 2022

Background Breast augmentation with implants is the most commonly performed cosmetic plastic surgery in Brazil and worldwide. The aim of this study was to assess patient satisfaction and quality of life following subpectoral breast augmentation with either microtextured or macrotextured implants, using the BREAST-Q. Methods A prospective study was conducted with 40 women with hypomastia undergoing subpectoral breast augmentation. The patients were randomly allocated to two groups to receive either microtextured or macrotextured breast implants. All participants were assessed preoperatively (baseline) and after 2 and 4 months of surgery for quality of life and patient satisfaction with the surgical results, using the BREAST-Q augmentation module, a patient-reported outcome measure. Results The patients had a mean age of 28.9 ± 6.45 years. The microtextured (n = 20) and macrotextured (n = 20) groups were homogeneous for sex, age, education level, marital status, and number of children (p > 0.05). Both groups showed significant improvement in satisfaction with breasts (p < 0.001), psychosocial well-being (p < 0.001), and sexual well-being (p < 0.001) at the 2- and 4-month follow-up visits compared with baseline. The observed improvements were associated with high effect size values of 5.09, 3.44, and 3.90, respectively. In contrast, significant decreases from baseline in physical well-being scores (p = 0.001) were found 2 and 4 weeks after surgery in both groups. Conclusion Subpectoral breast augmentation with either microtextured or macrotextured breast implants improved satisfaction with breasts and quality of life in patients with hypomastia.