• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.95-102
• /
• 2012

In this paper, we propose a method that can construct efficiently a P2P overlay multicast network composed of many heterogeneous peers in communication bandwidth, processing power and a storage size by selecting a peer in a distributed fashion using an ant-colony theory that is one of the computational intelligence methods. The proposed method considers not only the capacity of a peer but also the number of children peers supported by the peer and the hop distance between a multicast source and the peer when selecting a parent peer of a newly joining node. Thus, an P2P multicast overlay network is constructed efficiently in that the distances between a multicast source and peers are maintained small. In addition, the proposed method works in a distributed fashion in that peers use their local information to find a parent node. Thus, compared to a centralized method where a centralized server maintains and controls the overlay construction process, the proposed method scales well. Through simulations, we show that, by making a few high capacity peers support a lot of low capacity peers, the proposed method can maintain the size of overlay network small even there are a few thousands of peers in the network.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.25-46
• /
• 1998

This paper shows that there are the results of a series of model tests on the behavior of single pipe pile which is subjected to lateral load in, Nak-dong River sand. The purpose of the present paper is to estimate the effect of Non-homogeneity. constraint condition of pile head, lateral load velocity, relative density, and embedded length of pile on the behavior of single pile. These effects can be quantified only by the results of model tests. Also, these are compared with the results of the numerical methods (p-y method, modified Vlasov method; new ${\gamma}$ parameter, Characteristic Load Method'CLM). In this study, a new ${\gamma}$ parameter equation based on the Vlasov method was developed to calculate the modulus of subgrade reaction (E. : nhz.) proportional to the depth. The p-y method of analysis is characterized by nonlinear behavior. and is an effective method of designing deep foundations subjected to lateral loads. The new method, which is called the characteristic load method (CLM). is simpler than p-y analysis. but its results closely approximates p-y analysis results. The method uses dimensional analysis to characterize the nonlinear behavior of laterally loaded piles with respect to be relationships among dimensionless variables. The modulus of subgrade reaction used in p-y analysis and modified Vlasov method obtained from back analysis using direct shear test (DST) results. The coefficients obtained from DST and the modified ones used for the prediction of lateral behavior of ultimate soil reaction range from 0.014 to 0.05. and from 0.2 to 0.4 respectively. It is shown that the predicted numerical results by the new method (CLM), p-y analysis, and modified Vlasov method (new parameter) agree well with measured results as the relative density increases. Also, the characteristic load method established applicability on the Q-Mnu. relationship below y/D=0.2.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.907-911
• /
• 2009

To improve the moisture stability of the $CaS:Eu^{2+}$ red phosphor, surface coatings with silica nanoparticles were performed using five different methods, i.e., $P_1$, $P_2$, $P_3$, $P_4$, and $P_5$. The phosphors were coated with silica nanoparticles using a dip coating method ($P_1$) and sol-gel method ($P_2$). The phosphors were coated using a solution containing silica nanoparticles and poly(1-vinyl-2-pyrrolidone), PVP, $(P_3$). The phosphors were also coated with silica nanoparticles by reacting with the 1-vinyl-2-pyrrolidone (VP) monomer ($P_4$) or by reacting with mixtures containing VP and tetraethylorthosilicate ($P_5$). A decrease in the photoluminescence (PL) intensity was observed regardless of the coating methods. However, the moisture stability of the phosphors was enhanced by the coating when aged in a temperature-controlled humidity chamber. Among these methods, the $P_4$ (or $P_5$) method exhibited the greatest increase in moisture stability of the phosphors. The coated phosphors showed a relatively constant intensity with aging time, whereas the uncoated phosphor showed a decrease.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.3
• /
• pp.235-243
• /
• 2000

Objective: Our present studies were conducted to examine more effective isolating method of preantral follicles from mouse ovaries. Methods: ICR mice (3-6 weeks old) were sacrificed through cervical dislocation and their ovaries were removed and put into watch glasses containing Hams F-10 supplemented with 10% fetal bovine serum (FBS). Preantral follicles were isolated by three different methods; 1) enzymatical method and 2) mincing method, and 3) scraping method. Enzymatical method was carried out as following. Ovaries were bisected with a pair of fine 30G needles. Bisected ovaries were incubated at $37^{\circ}C$ and 5% $CO_2$ incubator in 2-well dish containing Hams F-10 supplemented with collagenase 600 lU/ml and DNAse 20 lU/ml. After 20 min., follicles were isolated by repeated pipetting. Isolated preantral follicles were collected, and the remnant of tissues was placed in incubator and previous procedure was repeated. Mincing method was carried out with a pair of fine 30G needles attached to 1 ml syringes and minced ovary. Scraping method was carried out with a pair of fine 30G needles and scratched to surface of ovary. The differences between isolating methods were analyzed using Student's t-test and Chi-square. Results were considered statistically significant when ${\rho}$ value was less than 0.05. Results: In handling time, mincing or scraping method ($28{\pm}3.42$ min or $16{\pm}1.58$ min) were significantly (p<0.00001) shorter than enzymatical method ($72{\pm}1.69$ min), and scraping method was significantly (p<0.01) shorter than mincing method. Total number of isolated follicles was significantly (p<0.0001) higher in enzymatical method ($49.8{\pm}3.91$) than in mincing or scraping method ($25.3{\pm}2.33$ or $20.5{\pm}1.75$). Isolated follicles in ${\leq}$90${\mu}m$ were significantly (p<0.005) higher in enzymatical method ($15{\pm}1.71$) than in mincing or scraping method ($7.8{\pm}0.98$ or $8.1{\pm}1.31$). In 91~130 ${\mu}m$, isolated follicles were significantly (p<0.0005) higher in enzymatical method ($33{\pm}3.27$) than in mincing or scraping method ($16.3{\pm}1.82$ or $10.7{\pm}1.38$). In ${\geq}$ 131 ${\mu}m$, isolated follicles were not significantly differences between all groups. In equal sizes, the rate of isolated follicles in ${\leq}$ 90 ${\mu}m$ was highest in scraping method (39.6% vs. enzymatical method: 30.1%, p<0.05; mincing method: 30.9%, p=0.11719, NS). Rate of follicles in $91{\sim}130$ ${\mu}m$ was significantly (p<0.05) lower in scraping method (52.7%) than in enzymatical or mincing method (66.3% or 64.5%). Rate of follicles in ${\geq}$131 ${\mu}m$ was highest in scraping method (8.3% vs. enzymatical or scraping method: 3.6%, p<0.05 or 4.6%, p=0.19053, NS). Conclusions: This study suggests that scraping method is simple and useful for isolation of preantral follicles, because this method reduced handling time and recovered enough follicles. The recovered rate of isolated follicles in diameter of 91 ~ 130 ${\mu}m$ was highest in all methods.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.197-208
• /
• 1998

This study was carried out to compare the amount of the maxillary bone remodeling and tooth displacement in each three maxillary superimposition methods, Ricketts, Best-fit, Structural method. Forty cases of the lateral cephalometric radiographs from 27 boys and 13 girls who had been treated to correct anterior cross-bite were selected for the study. The initial radiographs were taken at about 8-year-old and the second radiographs were taken in about 3.3 years later. Followings were the results: 1. With the Structural method, backward movement was shown in PNS, while forward movement was observed in ANS and point A. With the Ricketts method, however, all structures were shown significant backward movement comparing with Structural method(P<0.05). With the Best-fit method, the amount of horizontal movement was similar to that of the Structural method(P>0.05). 2. The palate seemed to be moved downward with Structural method, but there was no measured downward remodeling on nasal floor with Ricketts and Best-fit method(P<0.05). 3. Comparing with Structural method, Ricketts and Best-fit method significantly underestimated the eruption of the teeth by 20% to 30% (P<0.05). 4. The Structural method showed the anteroinferior rotation (43%) and posteroinferior rotation(57%) of the palatal plane, while the Best-fit method showed mostly anterosuperior rotation(87%), but no change was found in the Ricketts method. 5. With the Structural method, there was a statistically significant correlation between the amount of the rotation of the palatal plane and that of N-S line(r=0.86). 6. The measured angles of the long axis of the incisors and molars showed no significant difference in each 3 methods(P>0.05).

• Research in Community and Public Health Nursing
• /
• v.13 no.4
• /
• pp.648-667
• /
• 2002

This was a descriptive study designed to identify the level of coping method and its influencing factors on the family caregivers of demented patients, and resolve the family caregivers' level of stress. The data were collected from September 10 to October 10, 2001. Subjects for this study were recruited from four clinics, which were chosen from 15 clinics located in Chunbuk-Do as the study sites because of their cooperation for the study. They were similar in terms of size, the characteristics of the local community. and the population and registration status of the demented patients. The instruments used for the study were as follows: 1. Problematic behaviors of demented patients are measured by the Memory and Behavior Problem Checklist (Zarit, 1980), and the Linguistic Communication Symptoms Questionnaire (Bayles and Tomoeda, 1991) 2. The ability to carry out daily activities was measured using the Barthel Index (1965) and Katz Index (1963), which as well-known ADL assessment methods. 3. Burden was measured using Cost of Care Index by the Kosberg and Cairl (1986). 4. Coping strategy was measured Bell's 18 methods (1977). The data were analyzed using SPSS/PC. The study results were as follows: 1. The total stress score was 2.90 out of a maximum score of 5. The highest score reported was 3.09 on the dimension of restriction of individual and social activities, and the lowest region reported was 2.58 on the dimension of mental and physical health. 2. The total score of the coping method was 2.65 out of a maximum score of 5. The highest score reported was 4.01 on the dimension of thinking that includes an ideation such that it is better than any possible worst case, and the lowest score reported was 1.45 on the dimension of the self-image as a scapegoat. 3. There were significant differences in coping method among the subjects by age (F=2.752 p=0.04), caregiver (F=4.33 p=0.003), care-giving period (F=2.68 p=0.049), and dementia stage (F=2.87 p=0.034). 4. There were highly negative correlations ($\gamma$=-0.301 p=0.000) between problematic behaviors of demented patients and the coping method of their family caregivers. The highest correlation coefficient ($\gamma$=-0.339 p=0.000) was found between aggressive behaviors of the demented patients and the coping method of their family caregivers. 5. There was a low negative correlation ($\gamma$=-0.201 p=0.019) between the ADL of the demented patients and the coping method of their family caregivers. 6. There were highly negative correlations ($\gamma$=-0.213 p=0.005) between stress and the coping method of the family caregivers. The highest correlation was found between financial burden ($\gamma$=-.327 P=.000) and the coping method of the family caregivers. There was no significant correlation among unpleasant aspects of the demented patients, willingness to the demented patients, and the coping method of the family caregivers.

• The Pure and Applied Mathematics
• /
• v.12 no.2 s.28
• /
• pp.153-159
• /
• 2005

We investigate the error estimates of the h and p versions of the finite element method for an elliptic problems. We present theoretical results showing the p version gives results which are not worse than those obtained by the h version in the finite element method.

• Journal of the Chungcheong Mathematical Society
• /
• v.28 no.4
• /
• pp.575-582
• /
• 2015

The Newton-Raphson method is used to compute the q-th roots of a p-adic number for a prime number q. The sufficient conditions for the convergence of this method are obtained. The speed of its convergence and the number of iterations to obtain a number of corrected digits in the approximation are calculated.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2017

The aim of the research is to suggest an economical and sustainable method of reducing pH of recycled aggregate as an embanking and a covering materials. Because of the unhydrated cement based materials on the surface of the recycled aggregate, it causes a severe problem on environment with leaked high alkali water from embankment and covering by using recycled aggregate. In this research, to reduce the pH of recycled aggregate, regarding the recycled fine aggregate, eight different methods were tested and analyzed with three different categorized: natural treatment, artificial treatment, and chemical treatment. From the results of experiment, it was considered that the most efficient method of reducing pH of recycled aggregate was the chemical treatment using acid such as $CO_2$ acceleration or monoammonium phosphate (MAP), and diammonium phosphate (DAP). Especially, using MAP and DAP, fertilizers, is the most efficient method of reducing pH with its time duration and performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.429-440
• /
• 2006

This paper comprises two specific objectives. The first is to examine the applicability of ordinary kriging interpolation(OK) to the p-adaptivity of the finite element method that is based on variogram modeling. The second objective Is to present the adaptive procedure by the hierarchical p-refinement in conjunction with a posteriori error estimator using the modified S.P.R. (superconvergent patch recovery) method. The ordinary kriging method that is one of weighted interpolation techniques is applied to obtain the estimated exact solution from the stress data at the Gauss points. The weight factor is determined by experimental and theoretical variograms for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. In the p-refinement, the analytical domain has to be refined automatically to obtain an acceptable level of accuracy by increasing the p-level non-uniformly or selectively. To verify the performance of the modified S.P.R. method, the new error estimator based on limit value has been proposed. The validity of the proposed approach has been tested with the help of some benchmark problems of linear elastic fracture mechanics such as a centrally cracked panel, a single edged crack, and a double edged crack.