• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.79-87
• /
• 1978

This is an experimental study on friction welding and heat treatment of engine exhaust valve materials whose welding combination is SCr4 as stem to 21-4N as head and SUH3 to 21-4N. In this study, not only the experiments of friction welding under the selected optimum welding condition and the examination of the mechanical properties were carried out, but also the heat treatment of friction welded specimens under the two selected conditions was taken to obtain the better welding character, eliminating the latent stress and the hardness peak which appeared at the welded zones of heat resisting steel(21-4N, SUH3) and low alloyed steel ($SCr_4$) friction weldments. The results obtained by the experiments and consideration in this study are as follows: I) It was experimentally proved quite reasonable that 'speed=3,OOO rpm, heating pressure Pl=8 kg/ mm2, upsetting pressure p, = 20 kg/mm', heating time $t_1$ = 3 see, upsetting time TEX>$t_2$ = 2.5 sec' was selected as the optimum welding condition for friction-welding the engine exhaust valve materials $SCr_4$ to 21-4 Nand SUH 3 to 21-4 N. 2) The results of the previous study and this one on friction welding of such dissimilar materials as SUH 3-SUH 31, SCr 4-SUH 31, SCr 4-SUH 3, SUH 3-CRK 22, SCr4-21-4 Nand SUH3-21-4 N agreed with each other substantially in the friction welding characteristics at welded interface zones. 3) It was also certified quite satisfactory that '600\ulcornerCX30 min. Xroom air cooling' as an optimum heat treatment condition of the friction welded materials SCr 4-21-4 Nand SUH 3-21-4 N was experimentally determined to eliminate the latent stress and the hardness peak at welded zones. 4) About 20% of the tensile strength before heat treatment of friction welded specimens was decreased after heat treatment 600\ulcornerCX30 min. Xair cooling, but the location of fracture was moved from heat affected zone to parent $SCr_4$ & SUH3. 5) Microscopic examination of the weld joints friction-welded and heat-treated under the above mentioned conditions revealed that the weld zone is very narrow and has a fine grained intermixed structure without any welding defects. 6) The above mentioned conditions can be also utilized as friction welding parameters of the other dissimiar materials for engine valve production.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.4
• /
• pp.337-343
• /
• 2009

Purpose: ((R)-1-(2-chlorophenyl)-N-1-[$^{11}$C]methyl-N(1-propyl)-3-isoquinoline carboxamide ((R)-PK11195) is a specific ligand for the peripheral type benzodiazepine receptor and a marker of activated microglia, used to measure inflammation in neurologic disorders. We report here that a direct and simple radiosynthesis of [$^{11}$C](R)-PK11195 in mild condition using NaH suspension in DMF and one-step loop method. Materials and Methods: (R)-N-Desmethyl-PK11195 (1 mg) in DMSO (0.1 mL) and NaH suspension in DMF (0.1 mL) were injected into a semi-prep HPLC loop. [$^{11}$C]methyl iodide was passed through HPLC loop at room temperature. Purification was performed using semi-preparative HPLC. Aliquots eluted at 11.3 min were collected and analyzed by analytical HPLC and mass spectrometer. Results: The labeling efficiency of [$^{11}$C](R)-PK11195 was 71.8$\pm$8.5%. The specific activity was 11.8:$\pm$6.4 GBq/$\mu$mol and radiochemical purity was higher than 99.2%. The mass spectrum of the product eluted at 11.3 min showed m/z peaks at 353.1 (M+1), indicating the mass and structure of (R)-PK11195. Conclusion: By the one-step loop method with the [$^{11}$C]CH3l automated synthesis module, [$^{11}C$](R)-PK11195 could be easily prepared in high radiochemical yield using NaH suspension in DMF.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.332-338
• /
• 2009

A xylan-decomposing bacterium, HY-20, was isolated from the gut of a honeybee, Apis mellifera, and identified as Bacillus sp. The extracellular GH11 xylanase (XylP) gene (687-bp) of strain HY-20 encoded a protein of 228 amino acids with a deduced molecular mass of 25,522 Da and a calculated pI of 9.33. The primary structure of XylP was 97% identical to that of B. pumilus xylanase (GenBank accession no.: AY526092) that has not been characterized yet. The recombinant His-tagged enzyme (rXylP) overexpressed in Escherichia coli BL21 harboring pET-28a(+)/xylP was purified to electrophoretic homogeneity by cation exchange and gel permeation chromatographies. The purified enzyme exhibited the highest catalytic activity toward birchwood xylan at pH 6.5 and $50^{\circ}C$ and retained approximately 50% of its original activity when pre-incubated at $55^{\circ}C$ for 15 min. The recombinant enzyme was completely inactivated by $Hg^{2+}$ (1 mM) and N-bromosuccinimide (5 mM), while its activity was slightly stimulated by approximately 10% in the presence of $Mn^{2+}$ (1 mM), $Fe^{2+}$ (1 mM), and sodium azide (5 mM). rXylP was able to efficiently degrade various polymeric xylose-based substrates but PNP-sugar derivatives and glucose-based polymers were not susceptible to the enzyme.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.733-738
• /
• 2006

Nucleophilic addition reactions of p-substitutedbenzylamines $(XC _6H_4CH _2NH _2)$ to $\alpha$-phenyl-$\beta$-thiophenyl-acrylonitriles ($YC _4SH _2CH=C(CN)C_6H_4$Y') have been studied in acetonitrile at 25.0, 30.0, and 35.0 ${^{\circ}C}$. The reactions take place in single step in which the $C_\beta$ -N bond formation and proton transfer to $C_\alpha$ of $\alpha$-phenyl-$\beta$-thiophenylacrylonitriles occur concurrently with four-membered cyclic transition structure. These mechanistic conclusions are drawn based on (i) the large negative $\rho$x and large positive $\rho$Y' values and also large magnitude of $\rho$X, (ii) the negative sign and large magnitude of the cross-interaction constants ($\rho$XY), (iii) the normal kinetic isotope effects ($k_H/k_D$ > 1.0), and (iv) relatively low $\Delta H ^\neq$ and large negative $\Delta S ^\neq$ values.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2009

We describe here the cloning and characterization of a cDNA encoding the glutathione S-transferase (GST) from the bumblebee Bombus ignitus. The Delta-class B. ignitus GST (BiGSTD) gene spans 1668 bp and consists of four introns and five exons that encode 216 amino acid residues with a calculated molecular weight of approximately 24561 Da and a pI of 8.03. The N-terminal domain of BiGSTD has a conserved Ser residue, as well as conserved Lys, Pro, Glu, Ser and Tyr residues that are involved in the GSH-binding site of GST. The BiGSTD showed 60% protein sequence identity to the Bombyx mori GSTT1, 58% to Musca domestica GST, 57% to Drosophila melanogaster GST, and 55% to Anopheles gambiae GST1. BiGSTD was close to the insect-specific Delta class of GSTs in a phylogenetic tree. Northern blot analysis showed that BiGSTD is highly expressed in the fat body and midgut, and less so in the muscles of B. ignitus worker bees.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.245-250
• /
• 1996

$Y_2O_3$ thin film on si(100) was successfully grown by ionized cluster beam(ICBD) technique at substrate temperature of around $500^{\circ}C$ and pressure of ~$10^{-5}$Torr.To prevent the oxidation of Si substrae, a very thin yttrium layer was deposited on Si before reactive depositing of oxygen and yttrium source. In asdeposited stage, b.c.c and h.c.p strucutres of $Y_2O_3$ were observed from S-ary analysis. From the observation of spots and ring patterns in selected area diffractin(SAD) patterns. crystallane formation and growth could be proceeded during the deposition. $Y_2O_3$/mixed layer/$SiO_2=170\AA/50\AA/10\AA$ structure were verified by high resolution transmition electron imcroscopy(HRTEM) image, and the formation of amorphous layer of SiO2 was discussed . Electricla charateristics of the film were also investigated . In as-deposited Pt/$Y_2O_3$/Si sturcuture, leakage current was less than $10^{-6}$A/$\textrm{cm}^2$ at 7MV/cm strength.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1641-1644
• /
• 2005

Magnetic actuation utilizes the mechanic torque that is the result of interaction of the current in a coil with an external magnetic field. A main obstacle is, however, that torques can only be produced perpendicular to the magnetic field. In addition, there is uncertainty in the Earth magnetic field models due to the complicated dynamic nature of the field. Also, the magnetic hardware and the spacecraft can interact, causing both to behave in undesirable ways. This actuation principle has been a topic of research since earliest satellites were launched. Earlier magnetic control has been applied for nutation damping for gravity gradient stabilized satellites, and for velocity decrease for satellites without appendages. The three axes of a micro-satellite can be stabilized by using an electromagnetic actuator which is rigidly mounted on the structure of the satellite. The actuator consists of three mutually-orthogonal air-cored coils on the skin of the satellite. The coils are excited so that the orbital frame magnetic field and body frame magnetic field coincides i.e. to make the Euler angles to zero. This can be done using a Neural Network controller trained by PD controller data and driven by the difference between the orbital and body frame magnetic fields.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.348-351
• /
• 1995

A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.

• BMB Reports
• /
• v.31 no.2
• /
• pp.144-148
• /
• 1998

A bifunctional catalase-peroxidase, designated catalase-2, of a UV resistant Deinococcus radiophilus was purified to electrophoretic homogeneity by both chromatographic and electrophoretic methods. Its molecular weight was 310 kDa and composed of a tetramer of 80 kDa subunits. The catalase-2 exerted its optimal activity at $30^{\circ}C$ and around pH 9. Its $K_m$ value for $H_{2}0_{2} $ was about 10 mM. It showed the typical ferric heme spectrum with maximum absorption at 403 nm which shifted to 419 nm in the presence of cyanide. The ratio of A40i' A2S0 was 0.48. Fifty percent inhibition of the enzyme activity was observed at $4.6{\times}10^{-6}$, $7.7{\times}10^{-6}$, and $3.0{\times}10^{-6}$ M of NaCN, $NaN_3$, and $NH_{2}OH$, respectively. The enzyme was thermostable and not sensitive to 3-amino-1,2,4-triazole. Treatment of the enzyme with ethanol-chloroform caused a partial loss (30%) of its activity. The catalase-2 was distinct from the Deinococcal bifunctional catalase-3 in a number of properties, particularly in its molecular structure and substrate affinity.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.473-479
• /
• 2004

A sedimentation basin (SB) at the inlet of an irrigation reservoir which was constructed using an auxiliary dam was monitored to evaluate its pollutant removal efficiency. Water sampling at three points, i.e., inflow stream, upstream and downstream of the reservoir, were taken 5 times before and after the construction of the SB in 1999 and 2003, respectively. No significant water quality variations in inflow stream were observed during these periods. The COD, T-N, T-P and SS removal efficiencies were 38, 24, 35 and 49%, respectively. The results indicated that those removal efficiencies significantly increased during the rainy season and COD removal efficiency, especially, was higher than others studies. The scale of SB in this study was rational as aspects of pollutant removal efficiency and hydraulic detention time. And it is recommended that SB, at inlet of an reservoir, should be constructed as completely separated structure from reservoir water body and having SAR Index from 0.7% to 1.0%.