• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.338.2-338.2
• /
• 2016

Al doped ZnO (AZO) thin films were deposited on Si substrates with rod-shaped-surface by pulsed laser deposition method (PLD). Si-rods were prepared through chemical etching. To analyze the influence on the formation of the rod structure, samples with various chemical etching conditions such as AgNO3/HF ratio, etching time, and solution temperature were prepared. The morphology of Si-rod structures were examined by FE-SEM. Fig. 1 shows a typical structure of n-AZO/p-Si-rod juncions. The fabricated n-AZO/p-Si-rod devices exhibited p-n diode current-voltage characteristics. We compared the I-V characteristics of n-AZO/p-Si-rod devices with the samples without Si-rod structure.

• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.17-20
• /
• 2003

This paper describes the effect of halogenic gettering during oxide passivation of commercial solar cell with the $N^{+}$-P-$N^{+}$ structure. In order to study the effect of halogenic gettering on $N^{+}$-P-$N^{+}$ structure mono-crystalline silicon solar cell, we performed conventional POCl$_3$ diffusion for emitter formation and oxide passivation in the presence of HCl vapors. The $N^{+}$-P-$N^{+}$ structure based silicon solar cells were found to have higher short circuit current and minority carrier lifetime. Their performance was also found to be superior than the conventional $N^{+}$-P-$N^{+}$ structure based mono-crystalline silicon solar cell. The cell parameters of the $n^{+}$-p-$p^{+}$ and $n^{+}$-p-$n^{+}$ structure based cells, passivated by HCl assisted oxidation were measured. The improvement in $I_{sc}$ was attributed to the effect of the increased diffusion length of minority carriers, which came from the halogenic gettering effect during the growth of passivating oxide. The presence of chlorine caused gettering of the cells by removing the heavy metals, if any. The other advantage of the presence of chlorine was the removal of the diffusion induced (in oxygen environment) stacking faults and line defects from the surfaces of the silicon wafers. All these effects caused the improvement of the minority carrier lifetime, which in-turn helped to improve the quality of the solar cells.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.79-85
• /
• 1995

In this paper, an epi layer and a device structure for InP/InGaAs p-i-n/HBT OEIC is designed for a receiving frontend of high speed optical communications. A 3 stage transimpedance circuit using the p-i-n/HBT device is also designed by SPICE simulations for a high sensitivity including ISI noises at a given bit rate. Our simulations show that the Personick's assumption which is not commonly satisfied have estimated a photoreceiver sensitivity too high, so thus we have to also consider ISI noises in OCIC receiver designs.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제22권2호
• /
• pp.5-12
• /
• 1984

mod pin Steenrod algebra $A_{p}$ 는 steenrod reduced powers p$^n$ 및 Bockstein coboundary operation $\beta$에서 algebra로서 생성되었다. 그들 사이의 관계도 알려져 있다. 이 논문에서는 iterated loop space의 $A_{p}$ -module structure를 결정하는 한 명제인 (equation omitted)를 증명했다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.370-376
• /
• 2012

In this work, design considerations for high-performance silicon photodetector are thoroughly investi- gated. Besides the critical dimensions of device, guidelines for process architecture are suggested. Abiding by those criteria for improving both direct-current (DC) and alternating-current (AC) perfor- mances, a high-speed low-operation power silicon photodetector based on p-i-n structure for optical interconnect has been designed by device simulation. An $f_{-3dB}$ of 80 GHz at an operating voltage of 1 V was obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1435-1438
• /
• 1994

The effects of Ge composition variation in $a-Si_{1-x}Ge_x:H$ alloy p-i-n solar cells on the physical properties and current density-voltage characteristics are analyzed by a new simulation modelling based on the update published experimental datas. The simulation modelling includes newly formulated density of gap density spectrum corresponding to Ge composition variation and utilizes the newly derived generation rate formulars which include the reflection coefficients and can apply to multijunction structures as well as single junction structure. The effects in $a-Si_{1-x}Ge_x:H$ single junction are analyzed through the efficiency, fill factor, open circuit voltage, short circuit current density, free carriers, trap carriers, electric field, generation rate and recombination rate. Based on the results analyzed in single junction structure, the applications to multiple junction structures are discussed and the optimal conditions reaching to a high performance are investigated.

• 한국광학회지
• /
• 제8권6호
• /
• pp.500-505
• /
• 1997

광 수신기를 전자 논리 소자에 집적하기 위하여 발생되는 여러 문제점들을 개선하기 위하여 a-Si:H p-i-n 구조를 사용하여 CMOS IC위에 비정질 광 수신기를 제작하였다. 비정질 물질인 a-Si:H을 도입함으로써 PECVD와 같이 저온 공정을 진행하는 장비를 사용할 수 있도록 하여 이미 제작된 IC의 특성이나 구조 특히 금속 배선을 파괴하지 않으면서 집적할 수 있게 하였다. CMOS IC 위에 제작된 비정질 p-i-n 광 수신기는 양호한 순방향 전압 특성을 가지고 있었으며 누설 전류는 약 0.1$\mu\textrm{A}$ 정도, 항복 전압 -20V 이하의 특성을 보였다. 또한 레이저 다이오드 광 신호에 대한 광 수신기의 광 반응 특성을 실험하여 광 신호 검출을 조사함으로써 1V 이하의 작은 전압 스위칭을 통하여 광 검출의 On/Off를 제어할 수 있음을 관찰하였다. 이러한 특성을 이용하면 현재 광 도파로에서 빛 신호를 스위칭 하거나 modulation 할 때 발생하는 고전압 관련 문제점들을 해결할 수 있기 때문에 광 스위치로도 유용하게 이용될 수 있을 것으로 생각되며 나아가서는 광 interconnection에 매우 유용할 것으로 사료된다.

• 한국광학회지
• /
• 제14권2호
• /
• pp.184-188
• /
• 2003

TM 모드에는 영향을 끼치지 않으면서 TE 모드의 위상만을 변조시키는 P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$ 도파로 위상변조기를 제작하였다. TE 모드에 대해서만 위상변조를 일으키게 하기 위해 P-I-i-I-N 구조를 선택하였다. Fabry-Perot 공명 방법을 이용해서 TE-와 TM 모드에 대해 $\lambda=1.55$\mu\textrm{m}$ 파종에서 각각 측정하였다. TE-편광된 빛에 대한 위상변조 효율은 $\Delta\phi=7.9^{\circ}/V.mm$ 였다. 이것은 비슷한 구조를 갖는 위상변조기의 변조 효율 보다 거의 2.5배정도 향상된 결과이다. 또한, TM-편광된 빛에 대해 서는 위상변조가 관측되지 않았다.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.27-32
• /
• 1997

In resonant tunneling diodes with the quantum well structure showing the negative differential resistance (NDR), it is essential to increase both the peak-to-valley current ratio (PVCR) and the peak current desnity ( $J_{p}$) for the accurate digital switching operation and the high output of the device. In this work, a resonant interband tunneling diode (RITD) with single quantum well structure, which is composed of I $n_{0.47}$As/I $n_{0.52}$A $l_{0.48}$As heterojunction on the InP substrate, is fabricated ot improve PVCR and JP, and then the dependence of I-V charcteristics on the width of the quantum well was investigated.d.ted.d.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1097-1102
• /
• 2003

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode, Considering these results, we fabricated p-i-n diodes on the high resistive(4㏀$.$cm) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of pin diode can be decreased by the application of finger pattern has parallel resistance structure from 571Ω to 393Ω.