• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.426-431
• /
• 2013

Nanosized $TiO_2$ particles were prepared from titanium (IV) sulfate solution using base solutions at low reaction temperature ($95^{\circ}C$) and atmospheric pressure by hydrothermal precipitation method without calcination. The effects of preparation conditions, such as kind of base solutions (NaOH, $NH_4OH$, Monoethanolamine, Diethanolamine, Triethanolamine) and surfactants (CTAB, Span 20, SDBS), concentration of surfactants, temperature and pH, on the physical properties of $TiO_2$ particles have been investigated by XRD, SEM and Zeta-potential meter. Absorption area was also investigated by DRS in order to confirm the photocatalytic activity of the nanosized $TiO_2$ particles. It was turned out that, among base solutions, NaOH provides the smallest $TiO_2$ particles with excellent crystallinity. And cationic surfactant (CTAB) prepared smaller $TiO_2$ particles than any other surfactants. When CTAB is added in the concentration ratio of $Ti(SO_4)_2$:CTAB=10:1, $TiO_2$ particles with particle diameter of 5.8 nm were prepared. This is approximately 1/10 of that prepared without CTAB.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.443-454
• /
• 2013

Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically $V^{5+}$, $Co^{2+}$, and $Ni^{2+}$-incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated.

• Journal of Yeungnam Medical Science
• /
• v.18 no.2
• /
• pp.199-207
• /
• 2001

Background: Septoplasty with turbinate surgery is common surgical treatment in patients with septal deviation and chronic hypertrophic rhinitis. The aim of this study was to evaluation objective outcomes of septoplasty with turbinate surgery by analysis of subjective symptom score with objective acoustic rhinometric test before and after surgery, prospectively. Materials and Methods: We reviewed 45 adult patients which were done septoplasty with bilateral turbinectomy or turbinoplasty and followed up at least 3 months by one rhinologist from November 1999 to April 2000, prospectively. We analyzed subjective symptom score, minimal cross-sectional area (MCA), C-notch cross-sectional area, and total volume of both nasal cavity before and after surgery. Correlation test was studied between symptom improvement and acoustic rhinometric results. Results: Twenty nine cases were male and sixteen cases female. The average age was 26.9 year-old (range: 17 to 57 years). There was significantly improvement of symptom score in postoperative 3 months (p<0.05). There was significantly increased C-notch cross-sectional area and total volume in postoperative 3 months. Symptoms improvement were associated with acoustic rhinometric profiles, but, there was not significantly correlation. Conclusion: Septoplasty with turbinate surgery is considered to be effective for nasal obstruction in patients with septal deviation and turbinate hypertrophy. Acoustic rhinometric test is favorable objective test for evaluation of symptom improvement after septal surgery.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.253-258
• /
• 1997

Ten, heretofore unreported, $ 5^I-methyl-5^I-[2-(5-substituted uracil-1-yl)ethyl)]-2^I-oxo-3^I$-methylenetetrahydrofurans (H, F, Cl, Br, I, $ CH_3$,$CF_3$,$CH_2CH_3$,$ CH=CH2$, SePh) (7a-j) were synthesized and evaluated against four cell lines (K-562, FM-3A, P-388 and U-937). For the preparation of ${\alpha}$-methylene-${\gamma}$-butyrolactone-linked to 5-substituted uracils (7a-j), the convenient Reformasky type reaction was employed which involves the treatment of ethyl ${\alpha}$-(bromomethyl)acrylate and zinc with the respective 1-(5-substituted uracil-1-yl)-3-butanone (6a-j). The 5-substituted uracil ketones (6a-j) were directly obtained by the respective Michael type reaction of vinyl methyl ketone with the $K_2CO_3$(or NaH)-treated 5-substituted uracils (5a-j) in the presence of acetic acid in the DMF solvent. The .alpha.-methylene-.gamma.-butyrolactone compounds showing the most significant antitumor activity are 7e, 7f, 7h and 7j (inhibitory concentration $(IC_50)$ ranging from 0.69 to $2.9 {\mu}g/ml$), while 7b, 7g and 7i have shown moderate to significant activity. The compounds 7a, 7c and 7d were found to be inactive. The synthetic intermediate compounds 6a-j were also screened and found marginal to moderate activity where compounds 6b and 6g showed significant activity $(IC_50:0.4~2.8 {\mu}g/ml)$.

• Journal of Radiation Protection and Research
• /
• v.18 no.2
• /
• pp.71-79
• /
• 1993

Form the pure Maxwellian distribution(kT= 1.42MeV), the effects upon calibration factors of encapsulating a $^{252}Cf$ spontaneous fission neutron source were investigated to establish a standard neutron field in the Secondary Standard Dosimetry Laboratory at Korea Atomic Energy Research Institute(KAERI). A Monte Carlo code MCNP was used in simulating the encapsulation SR-Cf-100 and SR-Cf-1273 to be real conditions. The anisotropy(FI) and fluence-to-dose equivalents conversion factors$(H/{\Phi})$ were evaluated and compared with other results. As the results, the FI was determined to be 1.061 at ${\theta}=90^{\circ}$ with ${\pm}0.2%$ statistical error and the $(H/{\Phi})$ was evaluated to be $333.9 [pSv\;cm^2]\;with\;{\pm}0.5%$ statistical error, which is lower by 1.8% than that recommended by the ISO 8529. This means physically that the neutron spectrum of the unmoderated $^{252}Cf$ source in KAERI is a little more softened than that by the ISO.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.636-643
• /
• 2015

This study investigated changes in quality and sensory characteristics of soy sauce (Kanjang) with added Astragalus membranaceus (AK) to develop a new soy sauce product with improved sensory characteristics. The pure salinity slowly increased, but AK 10% decreased. The pH was a constant in all samples. The soluble solid content (Brix) increased after 2 months, but AK 10% decreased. With increased addition of Astragalus membranaceus (AM), the optical density increased after 4 months. The amino nitrogen increased in soy sauce with AK 5%. The total free amino acid content gradually increased in soy sauce with AK 5% aged for 6 months. As the addition of AM increased, the crude protein level decreased, but there was no difference between AK 0% and 5%. The sensory tests of AK 5% after 6 months showed higher acceptance. According to the aging period, the acceptability of AK 5% was the best. The results showed that soy sauce with of AK 5% and aged for 6 months exhibits greatly enhanced quality and sensory characteristics. Therefore, it is expected to be used as a natural resources in seasoning area.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.4
• /
• pp.254-263
• /
• 2009

The distribution and habitat characteristics of Echinosophora koreensis (Nakai) Nakai were investigated to compile basic data for conservation and restoration. The species Echinosophora koreensis is distributed within fourteen regions of the Korean Province of Gangwon, including Yanggu-gun, Inje-gun, Cheorwon-gun, Chuncheon-si and Hongcheon-gun. Natural habitats were located at altitudes of 192-626 m, with inclinations of $1-45^{\circ}$. One hundred and fifty seven vascular plant taxa were identified from 42 quadrats in 14 habitats. Dominant species among the woody plants, based on importance value, were Pinus densiflora and Quercus dentata in the tree (T1) layer, Quercus variabilis, Pinus densiflora and Quercus mongolica in subtree (T2) layer, and Fraxinus rhynchophylla, Prunus sargentii, Zanthoxylum schinifilium, and Ulmus davidiana var. japonica in the shrub (S) layer. Importance values for members of the herb layer were: Echinosophora koreensis 28.34%; Polygonatum odoratum var. pluriflorum 10.21%; Spodiopogon sibiricus 7.60%; Atractylodes ovata 4.77% and Carex lanceolata 4.13%. The importance values of the last four species were high, so they were at affinity with Echinosophora koreensis in their habitats. Average species diversity was 1.03, and evenness and dominance were found to be 0.82 and 0.16, respectively. The soil types were sandy loam and loam. Average field capacity was 13.28%, and the organic matter and soil pH were 6.70% and 5.77, respectively.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.135-146
• /
• 1983

This study is to investigate the properties of domestic fly ash for utilization as data in regard to fly ash which is by-product of domestic coal powder plants and the possibility of utilization as insulation material of domestic fly ash. Composition refractoriness size distribution density contents of hollow particles and crystalline phase were examined as the properties of domestic fly ash. As to the fired test pieces of fly ash by itself that varied contents of hollow particles with four kinds and of the fly ash-clay-saw dust system linear shrinkage bulk density app. porosity compressive strength thermal conductivity and structures were investigated for the possibility of utilization as an insulation material. The results are as follows : 1. The properties of the fly ash I) The constituent particle of the fly ash is spherical and it contains not a few hollow particles (floats by water 0.30-0.50 floats by $ZnCl_2$ aq.(SpG=1.71) 6.97-16.72%). ii) The chemical compositions of fly ash are $SiO_243.9-54.1%$ , $Al_2O_321.0-30.7%$ Ig loss is 7.4-24.1% and the principal of Ig loss is unburned carbon. iii) Fly ash was not suitable to use for mortar and concrete mixture because Ig. loss value is higher than 5% 2. Utilization as insulation material I) The test pieces of original fly ash floats by water floats by ZnCl2 aq(SpG=1.71) p, p t by ZnCl2 aq.(SpG=1.71) that were fired at 110$0^{\circ}C$ represented 0.11-0.18 kcal/mh$^{\circ}$ C as thermal conductivity value. ii) The test pieces which (76.5-85.5) wt% fly ash-(8.5, 9.5) wt% clay-(5.0-15.0) wt% saw dust system(68.0-72.0) wt% fly ash -(17.0-18.0)wt% clay-(10.0-15.0) wt% saw dust system and 59.5 wt% fly ash-25.5 wt% clay-15.0wt% saw dust system were fired at 110$0^{\circ}C$ the thermal conductivity was less than 0.1Kcal/mh$^{\circ}$ C. iii) In view of thermal conductivity and economic aspect insulation materials which added saw dust as blowing agent and clay as inorganic binder are better than that of fly ash as it is or separated hollow fly ash particles. iv) When the saw dust contents increased in the (59.5-90.0) wt% saw dust system and when amount of clay de-creased and firing temperature decreased under the condition of equal addition of saw dust app. porosity increased but bulk density compressive strength and thermal conductivity decreased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.709-714
• /
• 2002

Fish sauce is a traditional Korean fermented seafood and has been used as a condiment since long time ago. Northern sand lance sauce was manufactured with koji, enzyme, and squid viscera of fermentation accelerating agents, and ripened at $15^{\circ}C$. Moisture contents of all samples decreased gradually as fermentation progressed. Crude protein contents increased rapidly up to 1 month-fermentation and then increased slightly up to 5 month. Northern sand lance sauce with squid viscera was the highest in the contents of protein and lipid. The ash content increased gradually during the fermentation periods, while pHs decreased. TMA contents increased up to 3 month-ripening and then decreased slightly. Amino nitrogen content of Northern sand lance sauce with squid viscera increased as fermentation progressed and was the highest among all samples. VBN contents increased up to 5 month-ripening and that of Northern sand lance sauce with squid viscera was the higher than others.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.365-376
• /
• 2007

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength (${\mu}TBS$) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups by etching times (5, 15, 25 sec), adhesives types (Scotchbond Multipurpose (SM), Single Bond (SB), One-Step (OS)) and number of thermocycling (0, 2,000 cycles). Flat dentin surfaces were prepared on mid-coronal dentin of extracted third molars. After exposed fresh dentin surfaces were polished with 600-grit SiC papers, each specimen was acid-etched with 35% phosphoric acid (5, 15, 25 sec) and bonded with 3 different types of total etching adhesives respectively. Then, hybrid composite Z-250 was built up. Half of them were not thermocycled (control group) and the ethers were subjected to 2,000 thermocycle (experimental group). They were sectioned occluso-gingivally into $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams and tested with universal testing machine at a crosshead speed of 1.0 mm/min. Within limited data of this study, the results were as follows 1. There was no statistically significant difference in ${\mu}TBS$ between the thermocycled and non-thermocycled groups, except for both SM and SB etched for 25 sec. 2. In thermocycled SM and SB groups, bond strength decreased by extended etching time. In total etching systems, adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may cause deteriorate effects on bond strength when ethanol-based adhesive was used.