• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.936-936
• /
• 2006

Bulk amorphous materials have been intensively studied to apply for various advanced industry fields due to their high mechanical, chemical and electrical properties. These materials have been produced by several techniques such as mechanical alloying, melt spinning and gas atomization, etc. Among them, the atomization is the most potential technique for commercialization due to high cooling rate during solidification of the melt and mass productivity. However, the amorphous powders still have some limitations because of their low ductility and toughness. Therefore, intensive efforts have to be carried out to increase the ductility and toughness. In this study, the Ni-based amorphous powder was produced by the gas atomization process. And in order to increase the ductile toughness, ductile Cu phase was coated on the Ni amorphous powder by spray drying process. The characteristics of the as-synthesis powders have been examined and briefly mentioned. The master alloy with $Ni_{57}Zr_{20}Ti_{16}Si_2Sn_3$ was prepared by vacuum induction melting furnace with graphite crucible and mold. The atomization was conducted at $1450^{\circ}C$ under the vacuum of $10^{-2}$ torr. The gas pressure during atomization was varied from 35 to 50 bars. After making the Ni amorphous powders, the spray drying was processed to produce the Cu -coated Ni amorphous composite powder. The amorphous powder and Cu nitrate solution were mixed together with a small amount of binder and then it was sprayed at temperature of $130^{\circ}C$ and rotating speed of 15,000 R.P.M.

• Journal of Powder Materials
• /
• v.18 no.5
• /
• pp.430-436
• /
• 2011

Joining of NiO-YSZ to 316 stainless steel was carried out with B-Ni2 brazing alloy (3 wt% Fe, 4.5 wt% Si, 3.2 wt% B, 7 wt% Cr, Ni-balance, m.p. 971-$999^{\circ}C$) to seal the NiO-YSZ anode/316 stainless steel interconnect structure in a SOFC. In the present research, interfacial (chemical) reactions during brazing at the NiO-YSZ/316 stainless steel interconnect were enhanced by the two processing methods, a) addition of an electroless nickel plate to NiO-YSZ as a coating or b) deposition of titanium layer onto NiO-YSZ by magnetron plasma sputtering method, with process variables and procedures optimized during the pre-processing. Brazing was performed in a cold-wall vacuum furnace at $1080^{\circ}C$. Post-brazing interfacial morphologies between NiO-YSZ and 316 stainless steel were examined by SEM and EDS methods. The results indicate that B-Ni2 brazing filler alloy was fused fully during brazing and continuous interfacial layer formation depended on the method of pre-coating NiO-YSZ. The inter-diffusion of elements was promoted by titanium-deposition: the diffusion reaction thickness of the interfacial area was reduced to less than 5 ${\mu}m$ compared to 100 ${\mu}m$ for electroless nickel-deposited NiO-YSZ cermet.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.750-757
• /
• 2016

This study investigated the quality, sensory characteristics and commercial potential of a rice snack prepared with dried oyster. Mild and spicy versions of the snack were produced using an oil coating and a mixed seasoning powder coating, respectively. The approximate compositions of the mild snack and spicy snack were 5.13% and 4.78% moisture, 8.92% and 8.94% crude proteins, 17.58% and 20.35% crude lipids, 1.88% and 1.87% ash, and 2% and 1.8% salt, with water activity values of 0.20 and 0.18 and a pH of 6.11 and 6.10, respectively. The color of the mild snack was lighter with more yellow and less red compared with the spicy snack. Thiobarbituric acid levels increased slightly, and hardness decreased slightly during storage at $27{\pm}2^{\circ}C$. The sensory score of the spicy snack was slightly higher than that of the mild snack. These results suggest that the spicy snack might have more commercial potential than that of the mild snack according to its higher sensory test score.

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.533-538
• /
• 1990

In polysaccharide fermentation with Aureobasidium pullulans, the aeration effects on the production of polysaccharide and the rheological properties of fermentation broth were studied. The increase of the aeration rates from 0.5 to 2.0vvm at 500 rpm yielded the maximum specific production rate of polysaccharide from 0.046 to $0.093 (hr^{-1})$, and the maximum specific growth rate of cells from 0.168 to $0.192 (hr^{-1})$. The viscosity behavior of fermentation broths at the different aeration rates followed the power-law ${\tau}= K({\gamma})^n$. The viscosity attributed by cells was about 10% of the total viscosity of fermentation broth and most of viscosity was attributed by the polysaccharide produced. The relationship between power-law parameters and the concentration of polysaccharide generally satisfied the etㄴrations with the regression coefficient greater than 0.980, $lnK(t)= ln({\tau})_o-n(t)\;ln({\gamma})_o\;and\;K(t)=A P(t)^B$.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.608-614
• /
• 2017

Background: Ginsenoside Rg1 belongs to protopanaxatriol-type ginsenosides and has diverse pharmacological activities. In this report, we investigated whether Rg1 could upregulate muscular stem cell differentiation and muscle growth. Methods: C2C12 myoblasts, MyoD-transfected 10T1/2 embryonic fibroblasts, and HEK293T cells were treated with Rg1 and differentiated for 2 d, subjected to immunoblotting, immunocytochemistry, or immunoprecipitation. Results: Rg1 activated promyogenic kinases, p38MAPK (mitogen-activated protein kinase) and Akt signaling, that in turn promote the heterodimerization with MyoD and E proteins, resulting in enhancing myogenic differentiation. Through the activation of Akt/mammalian target of rapamycin pathway, Rg1 induced myotube growth and prevented dexamethasone-induced myotube atrophy. Furthermore, Rg1 increased MyoD-dependent myogenic conversion of fibroblast. Conclusion: Rg1 upregulates promyogenic kinases, especially Akt, resulting in improvement of myoblast differentiation and myotube growth.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.

• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.28-36
• /
• 2011

The aim of this study was to compare electromyography activity for long and lateral heads of triceps brachii muscle according to forearm positions during different triceps strengthening exercises. The muscle activities for long and lateral head of triceps brachii were measured by surface electromyography. Fifteen healthy volunteers participated for this study and performed elbow extension in three different elbow extension exercises (elbow extension in a supine position; EES, elbow extension with shoulder abduction at 90 degrees in a prone position; EESA, and elbow extension with one arm at the side of the trunk in a prone position; EESP) and forearm positions (supination, neutral, and pronation). A two-way repeated measures ANOVA was used to compare the effects of the exercise positions and forearm positions. The EMG activities of the long head of the triceps brachii increased significantly during EESP with forearm supination, whereas the activity of the lateral head of the triceps brachii increased significantly during EESA with the forearm in a neutral position (p<.05). The results of this study suggest that exercise positions and forearm positions should be considered for selectively strengthening the long and lateral heads of triceps brachii muscles.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.382-392
• /
• 2017

Objectives: The purpose of this study is to obtain basic data on the development of a risk communication model through an investigation of risk perception for radon and identify effective risk communication channels. Methods: A questionnaire was used to evaluate differences in perception level according to respective communication channels. A chi-squared test was used to analyze the difference in pre- and post-risk communication by communication channel. One-way ANOVA was used to analyze the difference in the radon risk perception rate for each communication channel. Results: All of the communication channels resulted in increased radon risk perception, but there was no statistical difference between them in terms of perception (p>0.05). However, based on previous findings that it is effective to use a multi-channel approach, it is considered that communication channels based on duplicate avenues is most appropriate. Conclusions: It is expected that this study will be used as basic data to better understand the formation of public opinion about radon risk and to understand the social reaction to each risk factor.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.3
• /
• pp.113-119
• /
• 2020

Purpose: A flatfoot that fails to form a longitudinal foot arch is a common lower limb deformity in children. This study evaluated the structural and functional effects of the insole for pediatric flexible flat foot (PFFF). Materials and Methods: Twenty-nine PFFF patients (20 boys and 9 girls, 58 feet) with bilateral symptomatic flatfoot deformities between February 2017 and May 2019 were included in this study. Sixteen patients (32 cases, study group) were treated with a pressured based 3-dimensional printing insole, and 13 patients (26 cases, control group) were followed up regularly without any treatment. Flatfoot was diagnosed by a lateral talo-first metatarsal angle of more than 4° in convex downward and talocalcaneal angles of more than 30° and a calcaneal pitch of less than 20°. The foot pressures, including the midfoot pressure, total foot pressure, and the ratio of the midfoot pressure to the total foot pressure, were evaluated by pedobarography. The clinical scores were assessed using the visual analogue scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS), and Pediatrics Outcomes Data Collection Instrument (PODCI) scores. Results: The mean age of the study group was 9.16 years, and the mean age of the control group was 7.73 years. The mean follow-up period was 16 months. The change in the lateral talocalcaneal angle was -4.664°±1.239° in the study group and -0.484°±1.513° in the control group. A significant difference in the amount of change of the lateral talocalcaneal angle was observed between the two groups (p=0.034). The midfoot pressures were similar in the two groups. Conclusion: Pressure based customized 3-dimensional printing insole in PFFF may have some effect on the hindfoot bony alignment, but it does not affect the changes in midfoot pressure.

• Archives of Craniofacial Surgery
• /
• v.18 no.3
• /
• pp.162-165
• /
• 2017

Background: It is controversial issue that heparin decreases thrombosis for microsurgical anastomosis, and its effective role is under discussion. This study is for proving whether low-dose heparin is preventing thrombosis in free flap reconstruction. Methods: Through chart reviews of 134 patients, using low-dose heparin for free tissue transfer from 2011 to 2016, retrospective analysis was performed. 33 patients received low-dose heparin therapy after surgery. And 101 patients received no-heparin therapy. Complications included flap necrosis, hematoma formation, dehiscence and infection. Results: In no-heparin therapy group, comparing the flap necrosis revealed 16 cases (15.84%). And, flap necrosis was 6 cases (18.18%) in low-dose heparin therapy group. The statistical analysis of flap necrosis rate showed no significant difference (p=0.75). The results showed that there was no significant difference of flap necrosis rate between two groups. Conclusion: In this study, patients in the low-dose heparin group had no significantly lower rates of flap failure compared with no-heparin group. This suggests that low-dose heparin may not prevent thrombosis and subsequent flap failure to a significant extent.