• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1022-1025
• /
• 2002

This paper presents the reliability of planar InP/InGaAs avalanche photodiodes (APD's) with recess etching, which is very crucial for the commercial 10-Gb/s optical receiver application. A versatile design for the planar InP/InGaAs APD's and bias-temperature tests to evaluate long-term reliability at temperature from 200 to $250^{\circ}C$. The reliability is examined by accelerated life tests by monitoring dark current and breakdown voltage. The lifetime of the APD's is estimated by a degradation activation energy. Based on the test results, it is concluded that the planar InP/InGaAs APD's with recess etching shows the sufficient reliability for practical 10-Gb/s optical receivers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.205-205
• /
• 2013

테라헤르쯔(terahertz: THz)파는 0.1~10 THz 의 범위로 적외선과 방송파 사이에 광대역 주파수 스펙트럼을 차지하고 있으며 직진성, 투과성, 그리고 낮은 에너지 (meV)를 가지고 있어 비 파괴적이고 무해한 장점을 지니고 있다. Ti:sapphire laser와 같은 femto-pulse source 등이 많은 발전이 되어 현재 많은 연구와 발전이 이루어지고 있다. femto-pulse source를 이용한 THz 응용에서는 높은 저항, 큰 전자 이동도, 그리고 아주 짧은 전하수명의 기판을 요구하는데 저온에서 성장한 (low-temperature grown : LT) GaAs는 격자 내에 Gallium 자리에 Arsenic이 치환 하면서 AsGa antisite가 발생하여 전하수명을 짧아지는 것을 응용하여 가장 많이 이용되고 있다. 현재 THz 응용분야에서 보다 작고 가격경쟁력이 있는 광통신을 이용한 THz photomixer등이 활발히 연구 하고 있다. 광섬유 내에서 손실과 분산이 최소값을 가지는 부분이 1.55 ${\mu}m$ 부근이고 In0.53Ga0.47As 기판을 이용하였을 때 여기에 완벽하게 만족하게 된다. 하지만 LT-InGaAs 의 경우 AsGa antisite로 인하여 carrier lifetime은 짧아지지만 높은 n-type 전하밀도를 가지게 된다. 이때 Be을 doping하여 전하밀도를 보상하여 높은 저항을 유지해야 하는데 Be의 활성화를 위해서는 열처리를 필요로 한다. 하지만 열처리를 하면 carrier lifetime이 길어지기 때문에 carrier lifetime과 저항을 적절히 조율해야 한다. 이는 물질자체의 특성이기 때문에 InGaAs는 GaAs보다 낮은 amplitude와 짧은 cut-off frequency를 가진다. 본 연구에서는 보다 높은 저항을 얻기 위하여 molecular beam epitaxy를 이용하여 semi-insulating InP:Fe 기판위에 격자 정합된 InGaAs:Be/InAlAs multi quantum well (MQW)를 온도별 ($250{\sim}400^{\circ}C$), 주기별 (50~150)로 성장을 하였고 이때 InGaAs layer의 Be doping level은 $2{\times}1018\;cm^{-3}$, Ex-situ annealing은 $550^{\circ}C$에서 10분으로 고정 하였다. THz 발생 실험에서는 InGaAs/InAlAs MQW은 4000 pA로 1,000 pA를 가지는 InGaAs epilayer보다 4배 높은 전류 신호를 얻을 수 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. THz 검출 실험에서는 LT-InGaAs:Be epilayer LT-InGaAs:Be/InAlAs, HT-InGaAs/InAlAs 샘플이 각각 180, 9000, 12000 pA의 전류신호를 가지고 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. HT-InGaAs/InAlAs MQW를 이용한 검출실험에서는 InGaAs layer가 defect free이지만 LT-InGaAs:Be/ InAlAs MQW 보다 높은 전류 신호를 얻을 수 있었다. 이는 InAlAs layer가 저항만 높이는 것뿐만 아니라 carrier trapping layer로써의 역할도 하는 것으로 사료된다.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.207-211
• /
• 2002

Band gap tuning by quantum well disordering in $In_{0.53}Ga_{0.47}As/InGaAsP(Q1.25)$ quantum well structure has been investigated using photoluminescence. The threshold temperature for the blue shift was about $750^{\circ}C$ , and the blue shift became larger as the annealing temperature increased. $SiO_2$ showed saturation as the annealing temperature increased. $SiN_x$caused larger blue shift than $SiO_2$, which is considered to be related to the low growth temperature of $SiN_x$. The diffusion of P and Ga are thought to be responsible for the blue shift of the $SiN_x$ and $SiO_2$capped quantum well disordering , respectively.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.295-298
• /
• 1999

AlGaAs/InGaAs power P-HEMTS (Pseudo-morphic High Electron Mobility Transistors) with 1.0-${\mu}{\textrm}{m}$ gate length for PCS applications have been fabricated. We adopted single heterojunction P-HEMT structure with two Si-delta doped layer to obtain higher current density. It exhibits a maximum current density of 512㎃/mm, an extrinsic transconductance of 259mS/mm, and a gate to drain breakdown voltage of 12.0V, respectively. The device exhibits a power density of 657㎽/mm, a maximum power added efficiency of 42.1%, a linear power gain of 9.85㏈ respectively at a drain bias of 6.0V, gate bias of 0.6V and an operation frequency of 1.765㎓.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.9-12
• /
• 2000

InP/lnGaAs heterojunciton phototransistors (HPTs) with transparent emitter contacts were fabricated and characterized. Indium Tin Oxide was RF sputtered for the emitter contacts. By comparison with InP/InGaAs HBTs, the dc characteristics of InP/lnGaAs HPTs demonstrated offset voltage due to ITO emitter contacts and similar common emitter current gain. The model parameters were extracted and a simple SPICE simulations were performed.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.58-61
• /
• 2002

Photoluminescence up-conversion in semiconductor heterostructures is a phenomenon in which luminescence occurs at energies higher than that of the excitation photons. It has been observed in many semiconductor heterostructure systems, including InP/AnALAs, CdTe/CdMgTe, GaAs/ordered-(Al)GalnP, GaAs/AIGaAs, and InAs/GaAs. In this wort, GaAs/AIGaAs heterostructures are used as a model system to study the mechanism of the up-conversion process. This system is ideal for testing different models because the band offsets are quite well documented. Different heterostructures are designed to study the effect of disorder on the up-converted luminescence efficiency. In order to study the roles of different types of carriers, the effect of doping was investigated. It was found that the up-converted luminescence is significantly enhanced by p-type doping of the higher-band-gap material.

• 전기의세계
• /
• v.28 no.4
• /
• pp.53-63
• /
• 1979

Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.133-133
• /
• 2010

3-5족 화합물 반도체를 이용한 집광형 삼중 접합 태양전지는 35% 이상의 광변환 효율로 주목을 받고 있다. 일반적으로 삼중 접합 태양전지는 넓은 영역대의 파장을 흡수하기 위해 밴드갭이 다른 InGaP, GaAs, Ge이 사용된다. 그 중 하부셀은 기계적 강도가 높고 장파장을 흡수할 수 있는 Ge이 사용되는데, p-type Ge 기판위에 III-V 결정막 성장 시 5족 원소가 확산되어 pn접합을 형성하게 된다. 이러한 구조를 가진 Ge 하부셀이 효율적으로 홀-전자 쌍을 형성하기 위해서는 두꺼운 베이스와 얇은 에미터 접합이 필요하다. InGaP의 phosphorus는 낮은 확산계수로 인해 GaAs의 arsenic에 비해 얇은 접합이 형성 가능하며, Ge표면 에칭효과가 더 적다는 장점이 있다. 이를 고려해 우리 연구그룹에서는 metalorganic chemical vapor depostion(MOCVD)을 이용하여 Ge기판위에 성장한 InGaP layer의 특성을 관찰해 보았다. <111>로 $6^{\circ}$ 기울어진 p-type Ge(100) 기판위에 MOCVD를 통해 InGaP layer를 형성하였고, 성장된 layer를 atomic force microscope(AFM)와 high-resolution x-ray diffraction(HRXRD)을 이용하여 표면형상, 조성, 응력상태 등을 각각 관찰하였다. 또한 phosphorus 확산에 의해 형성되는 도핑농도는 electrochemical capacitance-voltage(ECV)을 이용하여 관찰하였다. 성장된 Ge기판위의 InGaP layer의 경우 특징적으로 높이 50 nm, 밑변 길이 $1\;{\mu}m$의 경사진 표면을 관찰할 수 있었으며, 이러한 구조는 TMIn과 TMGa의 비율이 증가 할수록 감소하였다. 따라서 이러한 경사진 형태의 구조는 격자 불일치 때문인 것으로 판단된다. 추가적으로 V/III ratio의 최적화를 통해 1.3 nm의 표면 거칠기를 갖는 InGaP layer를 얻을 수 있었다. ECV를 통해 Ge 하부셀의 pn접합 형성을 관찰한 결과 약 160 nm에서 접합이 형성되는 것을 관찰할 수 있었다. 또한, 같은 성장 조건의 샘플을 1000 초 열처리 후에 접합깊이의 변화를 관찰한 결과 180 nm에서 접합이 관찰되었지만, GaAs의 arsenic에 의한 pn접합은 열처리 후에 그 깊이가 170 nm에서 300 nm로 증가 하였다. 따라서 삼중접합 태양전지의 제작 공정을 고려할 경우 phosphorus에 의한 접합 형성이 Ge 하부셀의 동작 특성에 유리할 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.40-47
• /
• 2001

The structural dependence of the performance of an 1.55 $1.55{\mu}m$ InGaAsPIInGaAsP MQW electro-absorption modulator for highspeed digital fiber communication was systematically investigated. The effects of n-doped SCH region length $t_n$ as well as the general structure parameters including quantum well number $N_w$, well-thickness $t_w$, detuning wavelength $\Delta\lambda$, and device length L were thoroughly analyzed. Thereby, a high-pelfoIDlance electro-absorption modulator with device length L of $100{\mu}m$ was successfully designed. The designed structure showed excellent characteristics that have residual loss less than -1.5 dB, operational voltage from 0 V to -2V, and extinction ratios of -2.92 dB at $V_{\alpha}$=-1 V and -10 dB at $V_{\alpha}$=-2V.X>=-2V.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1999

InGaP epilayers were grown on the flat, $2^{\circ}$off, $6^{\circ}$ off, and $10^{\circ}$off GaAs substrates by organo-metallic vapor phase epitaxy, and influences of crystallographic misorientation of the substrate on the structural and optical properties such as lattice mismatch, elastic strain, lattice curvature, misfit stress, and PL intensity /line-width were investigated in this study. Material characterizations were carried out by TXRD( tripple-axis x-ray diffractometer) and low temperature (11K) PL (photoluminescence). With increase of the substrate misorientation angle (S.M.A.), the relative incorporation of Ga atoms on the substrate surface was found to be enhanced. Also, with increase of the S. M. A., the x-ray line-width of the InGaP epilayer was reduced, indicating that the crystal quality of the epilayer could be improved tilth a misoriented substrate. It was also found that the elastic accommodation of the strain-free lattice misfit was more remarkable in a misoriented sample. PL intensity increased, and PL line-width and emission wavelength decreased with the increase of S. M. A. The results conclude that the elastic characteristics and the crystal quality of the InGaP epilayer could be remarkably enhanced when the misoriented substrates were employed.