• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.107-113
• /
• 2009

In order to improve air stability, we proposed a new active layer of an organic TFT by synthesizing P3HT/POSS conjugated polymer. P3HT/POSS OTFTs with the various P3HT/POSS volume ratios were fabricated and characterized. With the P3HT/POSS volume ratio of 1:1, we achieved the field-effect mobilities of ${\sim}1.19{\times}10^{-3}\;cm^2/v{\cdot}sec$ in the saturation region and the current on/off ratio of ${\sim}2.51{\times}10^2$. The resulting current on-off ratio was much higher than that of the P3HT-based OTFTs and resulted from the dramatic decrease of the off-current. Since the off-current can be reduced by preventing oxygen in atmosphere from doping the P3HT/POSS active layers, this new active layer shows its ability to avoid oxygen doping in atmosphere. Therefore, the improvement of the air stability can be achieved by employing the P3HT/POSS active layers.

• Journal of Preventive Medicine and Public Health
• /
• 제24권2호
• /
• pp.195-210
• /
• 1991

Fatty liver is caused by derangement of fat metabolism and can be reversed by removal of contributing factors. The contributing factors of fatty liver is known to be overweight, chronic alcoholism, diabetes mellitus, malnutrition, and drug abuse such as tetracycline. This study was carried out on 1335 persons who visited 'Soon Chun Hyang Human Dock Center' from March to June 1990. In analysis of the data, prevalence of fatty liver diagnosed by ultrasonogram by age and sex, laboratory finding between fatty liver group and normal group, and odds ratio of known contributing factors, were compared. The results obtained are as following ; 1) The prevalence rate of fatty liver diagnosed by ultrasonogram is 29.6% in male and 11.5% in female. 2) Age groups with high prevalences are $40{\sim}50's$ in male (32.0%) and 50's in female (24.5%). 3) The fatty liver shows significant association with style (p<0.05), whereas not with hepatitis B-virus surface antigen (p>0.05). 4) All laboratory values except alkaline phosphatase and bilirubin are elevated significantly in accordance with the degree of fatty liver (p<0.01). 5) Fatty liver diagnosed by ultrasonogram showed so strong associations with body index, triglycerides and gamma-glutamyl transferase for males, and body index and fasting blood sugar for females that these factors may be used as supplementary data in establishing diagnosis of fatty liver. 6) Odds ratio of contributing factors are as follows ; If the odds ratio of below 29 year of age is 1.0 then that of $30{\sim}39$ is 1.74 (p=0.33), $40{\sim}49$ is 2.47 (p=0.10), $50{\sim}59$ is 2.86 (p=0.0570), over 60 is 1.81 (p=0.34). If the odds ratio of female is 1.0 then that of male is 5.67 (p<0.01). If the odds ratio of body index below zero is 1.0 then that of $0{\sim}9$ is 5.08 (p<0.01), $10{\sim}19$ is 12.37 (p<0.01), $20{\sim}29$ is 29.19 (p<0.01), 30 above is 154.02 (p<0.01). If the odds ratio of below 99 mg/dl FBS is 1.0 then that of $100{\sim}120$ is 106 (p=0.76), over 120 is 1.91 (p=0.02). If the odds ratio of below $29{\mu}/1{\gamma}-GT$ is 1.0 then that of $30{\sim}s59$ is 2.11 (p<0.01), $60{\sim}90$ is 1.87 (p<0.05), 90 above is 1.69 (p=0.15). If the odds ratio of below 149 mg/dl TG is 1.0 then $150{\sim}199$ is 1.49 (p=0.05), $200{\sim}250$ is 1.09 (P=0.77), 250 above is 2.53 (p<0.01). In summary, early diagnosis of fatty liver could be made by ultrasonogram supplemented with body index and nm triglyceride. The fatty liver could be preventive by avoiding contributing factors such as obesity, alcohol intake, high blood sugar appropriately.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.383-392
• /
• 2014

Purpose: In this study, we sought to understand the risk factor for chronic disease of workers by studying the association between occupational standing time and metabolic syndrome(MetS) in full-time 300 male workers. Materials: Data on age, life habit, work related information of the subjects were surveyed using self-reported questionnaire and interview. MetS was identified based on the report of Alberti et al.(2009). As for the data analysis, SPSS 19.0 was used to conduct the descriptive statistic, ANOVA, Pearson correlation coefficient and multiple logistic regression analysis. Results: Daily working hour affects on the lifting heavy objects, running and strenuous exercise(r=-0.137, p<0.01), and total physical function decreased with the increase in age(r=-0.145, p<0.01). Also, obese was significantly associated with genuflection and bend over(r=-0.110, p<0.05). On multiple logistic regression analysis for the diagnostic indices of MetS, occupational standing time were significantly associated with waist circumference(odds ratio=0.885, ${\beta}$ value=-0.122, 95% CI=0.797-0.983, p<0.05) and triglyceride (odds ratio=0.873, ${\beta}$ value=-0.136, 95% CI=0.800-0.953, p<0.01). Conclusions: These results suggest that the working posture may be important risk factor in pathogenesis and growing of MetS and cardiovascular disease.

• 환경위생공학
• /
• 제16권2호
• /
• pp.32-37
• /
• 2001

The purpose of this study was to investigate the created liquid post-acid fermentation of usability of denitrification as exterior carbon sources by pH control. The time of acid fermentation of food waste, the slower loading capacity of organic matter, the faster decomposition rate, but the density of generation Volatile Fermentation Acids(VFAs), was weak and, $SBOD_{5}$ : ST-N rate and $SBOD_{5}/SCOD_{Cr}$ rate was low. Between TS and VS, VS was decreased to 4.5th day fast, and then was decreased slowly. 1.5 days after stating the experiments, $SCOD_{Cr}$, $SBOD_{5}$, STOC and $VFA_{s}$ was decreased of increased slowly, and then increased fast. And after showing the highest density, it was tended to decreased fast. At the time of $SBOD_{5}$ with the highest density, at $SBOD_{5}$ : ST-N ratio, $R_1$ was 303:1, $R_2$ was 319:1, $R_3$was the highest. After studying $SBOD_{5}$ : ST-N ratio and $SBOD_{5}/SCOD_{Cr}$ ratio, as a carbon source of biological denitrification it was profitable composition ratio.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1835-1842
• /
• 2014

The goal of this study was to evaluate micro-bubble concentration ($C_{air}$) in water by air/water ratio (A/W ratio) with a micro-bubble generating pump. The estimation of micro-bubble concentration is based on the balance of inlet/outlet air and water flow rate. On net A/W ratio to be generated micro-bubble, we found that the obtained the $C_{air}$ are shown as a function of discharge pressure ($P_g$) of the micro-bubble generating pump. The correlation of the $C_{air}$ and the $P_g$ ($C_{air}=3.261P_g-1.754$) was adequately described by the least square methods with a high correlation coefficient (r = 0.9459) and calculated values fit the experimental data quite well. The $C_{air}$ was lower than theoretical dissolved air concentration ($C_{aq}$) calculated by Henry's law. The $C_{air}$ for being operated the micro-bubble generating pump was 6.75 - 39.53 mL/L, however, we found that the optimum of the $C_{air}$ to generate micro-bubble was the range from 10 to 12 mL/L.

• 한국식품영양과학회지
• /
• 제33권10호
• /
• pp.1685-1688
• /
• 2004

연구는 십전대보 추출물에 카파-카라기난과 한천의 첨가비율을 달리하여 제조한 젤리의 관능적 특성 및 기계적 평가를 실시하였다. 십전대보 추출물의 pH는 4.95, 당도는 7.0 Brix$^{\circ}$ 그리고 탁도는 3 이상으로 매우 탁한 것으로 나타났다. 십전대보 추출물에 카파-카라기난과 한천의 첨가 비율을 달리 한 젤리 액의 pH는 한천의 첨가량이 증가함에 따라 pH는 낮아졌다. 또한 당도는 이소말토올리고당 25% 첨가시 25.2 Brix$^{\circ}$로 고정 되었다. 탁도는 한천의 첨가비율이 증가함에 따라 유의적으로 증가하여 탁한 젤리액을 형성하였다. 냉장고에서 굳힌 젤리의 기계적 측정결과 cohesiveness는 젤화제의 첨가비율에 따라 유의적인 차이를 나타내지 않았다. Chewlness와 gumminess는 한천의 비율이 증가함에 따라 유의적으로 감소하였다. Hardness는 한천의 첨가비율이 증가할수록 유의적으로 감소하였고 springiness는 카파-카라기난 0.7%와 한천 0.3% 첨가 비율일 때 가장 높았고 한천 1.0% 첨가 시 가장 낮았다. 관능검사 결과 color는 카파-카라기난 0.7%와 한천 0.3%의 비율일때 가장 높았고 flavor는 유의적인 차이가 없었다. Hardness는 카파-카라기난만 첨가했을 때 가장 높게 나타났고 한천의 첨가 비율이 증가함에 따라 유의적으로 감소하였다. Overall acceptance는 카파-카라기난0.7%와 한천 0.3%의 첨가시 가장 높았고 그 다음이 0.5%대 0.5%로 나타나 카파-카라기난 0.7%과 한천 0.3%의 첨가비율로 제조된 젤리의 관능적 특성이 우수하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1629-1634
• /
• 2008

A trial was conducted to determine the effect of low crude protein (CP) diets with constant metabolizable energy to crude protein (ME:CP) ratio on growth, body composition and nutrient utilization of broiler chicks from 1 to 26 days of age. Four dietary treatments having four levels of CP and ME as 23, 22, 21 and 20% and 3,036, 2,904, 2,772 and 2,640 kcal/kg, respectively, were formulated and a ME:CP ratio of 132 was maintained in all the diets. Digestible lysine was maintained at 1.10 of the diet. A total of 1,760 day-old Hubbard broiler chicks were randomly divided into 16 experimental units and each diet was offered to four experimental units at random. Feed intake was increased (p<0.05) while weight gain and feed conversion ratio were adversely affected (p<0.05) when the diets with low CP and ME were fed to broilers. Total protein intake and total ME intake were linearly decreased (p<0.05) and protein efficiency ratio and energy efficiency ratio were lower (p<0.05) than in the chicks fed dietary regimen with 22% CP and 2,904 kcal/kg ME. The whole body analysis of the birds revealed that chicks fed the lowest dietary regimens retained less (p<0.05) nitrogen and more ether extract than chicks fed the control diet, however, body dry matter, total body ash and fat free body protein were not affected. Similarly, protein and energy utilization were also unaffected by the dietary treatments. In summary, chicks fed low CP diets with constant ME:CP ratio grew slower, used feed less efficiently and retained less protein and more body fat than chicks fed the control diet.

• 대한치과의사협회지
• /
• 제47권7호
• /
• pp.435-443
• /
• 2009

The purpose of this study was to compare the centering ratio and reduction of canal curvature according to the preparation sizes of #30, #40 and #50 using three rotary NiTi instruments which have different shaft tapers. Seventy-two simulated root canals in clear resin blocks (Endo Training Bloc; Dentsply Maillefer, Ballaigues, Switzerland) were divided as following 3 groups according to the file system; the 24 canal blocks prepared with each of ProTaper Universal system (Group P), LightSpeed eXtra system (Group L), and K3 (Group K). The pre- and post-instrumented root canals were scanned and superimposed to evaluate and calculate the centering ratio and reduction of canal curvature. Mean scores of each group were statistically analyzed using one-way ANOV A and Duncan's multiple range test for post-hoc comparison. The results were as followings: 1. Group L showed better centering ratio, followed by K and P. And all experimental groups generally showed increasing tendency of centering ratio as the apical size was increasing from #30 to #50, except at 1 mm level of group P where showed reducing tendency of centering ratio. The smaller the ratio, the better the instrument remained centered in the canal. 2. Group P showed more decrease of canal curvature at all apical shaping size (p < 0.05). Under the conditions of this study, the shaft design could affect the quality of canal shaping and the smooth taperless flexible (LightSpeed) shaft design was capable of preparing canals with good morphological characteristics in curved canals.

• 한방재활의학과학회지
• /
• 제19권4호
• /
• pp.115-126
• /
• 2009

Objectives : The aim of this study was to evaluate whether the foot pressure distribution correlates with the lumbo-sacral curvature, and the Oswestry Disability Index in chronic low back pain patients. Methods : We measured the fore foot pressure and the rare foot pressure using the foot analyzer in 28 women subjects with chronic low back pain. The lumbo-sacral curvature and the Oswestry Disability Index(ODI) were also measured. Results : 1. Subjects with higher ODI(%) had significantly lower Fore foot pressure/Rare foot pressure ratio(F/R ratio) (p<0.01). 2. Lumbar lordotic angle and Ferguson angle were inversely related to ODI(%) (p<0.05, p<0.01). 3. Lumbar lordotic angle and Ferguson angle were positively related to F/R ratio (all p<0.05). Conclusions : Using the Foot Analyzer(FA-48S, Tech storm Inc.) we have shown that F/R ratio has significant correlation with the lumbo-sacral curvature and the Oswestry Disability Index. These result suggest that the Foot analyzer may be used in assessing back pain in chronic low back pain patients.

• 소성∙가공
• /
• 제20권1호
• /
• pp.23-28
• /
• 2011

For the fabrication of nano patterned products manufacturing a nano patterned mold is needed in advance. The nano patterned stamper was fabricated by electroforming the AAO master with nickel. The surface of nickel-plated stamper had nano-patterned holes with the diameter of 73 nm and the depth of 83 nm. Hot embossing was used for forming P3HT sheet and the process factors of hot embossing were closer as pressure, temperature and time. In the present paper hot embossing experiments were performed to find the main process conditions to affect the replication ratio of nano patterns on surface of P3HT sheet. As a result, main contributing factors for the replication ratio of hot embossed pattern could be sequentially enumerated as pressure, temperature and time.