• Korean Journal of Plant Resources
• /
• v.21 no.6
• /
• pp.435-439
• /
• 2008

Due to the fact that tocopherols and tocotrienols have antioxidant and anticancer properties, the commercial utilization of unsaponifiable fractions in rice bran is increasing. These nutraceutical compounds, however, are fairly unstable and readily break down when exposed to oxygen or lighting conditions. To compare the relative sensitivity of vit E isomers to heat and oxygen, concentrated unsaponifiable fractions extracted from crude rice bran oil were exposed to various temperature, oxygen (nitrogen-balanced), and bathing solvent conditions and resultant concentration changes in ${\alpha}$- and ${\gamma}$-tocopherols (T) and tocotrienols (T3) were evaluated. Each isomer exhibited different heat stability. Among them, ${\alpha}$-T3 degraded more rapidly compared to other vit E isomers while ${\alpha}$-T was the most stable isomer. Oxygen level also showed significant impact on each isomer's stability where severe reductions of ${\gamma}$-T (by 20%) and ${\gamma}$-T3 (by 29%) were observed under 2% oxygen conditions, while under 0% oxygen conditions no degradation could be observed even after exposure to $95^{\circ}C$ for 4 hours. When various blending solvents were mixed with concentrated unsaponifiable fractions, organic solvents such as isooctane and hexane were more effective in maintaining the stability of ${\gamma}$- T3 compared to edible oils, among which com oil was more efficient than soybean and rice bran oils.

• Journal of the Korean Society of Combustion
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2013

The oxy-fuel combustion is $CO_2$ capture technology that uses mixture of pure $O_2$ and recirculated exhaust as oxidizer. Currently some Oxy-fuel power plants demonstration project is underway in worldwide. Meanwhile research project for converting 125 MWe Young-Dong power plant to 100 MWe oxy-fuel power plants is progress. In this paper, 1 D process analytical approach was applied for conducting process design and operating parameters sensitivity analysis for oxy-fuel combustion of Young-Dong power plant. As a result, appropriate gas recirculation rates was 74.3% that in order to maintain normal rating superheater, reheater steam temperature and boiler heat transfer patterns. And boiler efficiency 85.0%, CPU inlet $CO_2$ mole concentration 71.34% was predicted for retrofitted boiler. The oxygen concentration in the secondary recycle gas is predicted as 27.1%. Meanwhile the oxygen concentration 22.4% and moisture concentration 5.3% predicted for primary recycle gas. As the primary and secondary gas recirculation increases, then heat absorption of the reheater is tends to increases whereas superheater side is decreased, and also the efficiency is tends to decrease, according to results of sensitivity analysis for operating parameters. In addition, the ambient air ingression have a tendency to lead to decline of efficiency for boiler as well as decline of $CO_2$ purity of CPU inlet.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.97-101
• /
• 2004

W $O_{x}$-based semiconductor type thin film gas sensor was fabricated for the detection of N $O_{x}$ by reactive d.c. sputtering method. The relative oxidation state of the deposited W $O_{x}$ films was approximately compared by the calculation of the difference of the binding energy between Ols to W4 $f_{7}$2/ core level XPS spectra in the standard W $O_3$ powder of known composition. As the annealing temperature increased from 500 to 80$0^{\circ}C$, relative oxygen contents and grain size of the sputtered films were gradually increased. As the results of sensitivity ( $R_{gas}$/ $R_{air}$) measurements for the 5 ppm N $O_2$ gas, the sensitivity was 110 and the sensor showed recovery time as fast as 200 s. The other sensor properties were examined in terms of surface microstructure, annealing temperature, and relative oxygen contents. These results indicated that the W $O_3$ thin film with well controlled structure is a good candidate for monitoring and controlling of automobile exhaust.haust.t.t.t.

• Sleep Medicine and Psychophysiology
• /
• v.1 no.1
• /
• pp.60-67
• /
• 1994

Objectives: The Obstructive sleep apnea syndrome is characterized by snoring, observed apnea during sleep and excessive daytime sleepiness. The overnight polysomnographic recording is used to investigate patients with possible obstructive sleep apnea syndrome. But the overnight polysomnographic recording is time consuming, expensive, and labor-intensive. Recently in diagnosis of obstructive sleep apnea syndrome, several simple screening tests have been suggested. Methods: This study was performed to assess the probability of application of clinical features and the degree of oxygen desaturation as a screening test for the obstructive sleep apnea syndrome. The sensitivity and specificity of the self-report of clinical features including snoring, observed apnea during sleep, excessive daytime sleepiness and insomnia were tested. And the degree of oxygen desaturation measured by oximetry in 42 subjects were compared with the overnight polysomnographic recording results. Results: In the prediction of apnea index more than 5, the sensitivity of observed apnea during sleep, snoring, excessive daytime sleepiness and insomnia were 96.8%, 93.5%, 38.7%, 25.8% and the specificity of those clinical features were 182%, 36.4%, 100%, 72.7%, respectively. In the prediction of apnea index more than 5, the sensitivity and specificity of the combination of more than three self-report clinical features were 54.8% and 90.9%. The degree of oxygen de saturation and maximal apnea duration in the group of apnea index more than 5 were significantly different from those in the group of apnea index below 5(P<0.001). And the apnea index was significantly correlated with the degree of oxygen desaturation and maximal apnea duration(P<0.001). Conclusion: These results suggest that application of clinical features alone as a screening test for the obstructive sleep apnea syndrome is inadequate because of it's high rate of false positive and false negative results. The degree of oxygen desaturation measured by oximetry is possibly applicable to screening test and follow up evaluation of treatment efficacy for the obstructive sleep apnea syndrome.

• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.71-77
• /
• 2018

In this paper, considering the oxygen sensitivity and preference pattern of the patient, the profile of the oxygen therapy of the individual is specified. And, we design a three-compartment, single compartment oxygen chamber that automatically adjusts the oxygen pressure according to the specified profile. Hyperbaric oxygen therapy is a method of providing patients with 100% oxygen higher than atmospheric pressure for therapeutic purposes. However, there is a disadvantage that the ear pain is caused by the pressure difference depending on the individual. Based on the embedded system, the proposed system creates a patient-tailored oxygen therapy profile by DB of patient's preference patterns and treatment records of oxygen therapy. If only the patient's name is entered, the oxygen chamber system can adjust the oxygen pressure automatically according to the profile pattern to maximize the oxygen treatment effect.

• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.45-52
• /
• 2007

Polyacrylonitrile(PAN) fiber was treated with low-temperature plasmas of argon and oxygen for surface modification, and its surface chemical structure and morphology were examined by a field emission scanning electron microscope(FESEM) and a Fourier-transform infrared microspectroscopy(IMS). The argon-plasma treatment caused the only mechanical effect by sputtering of ion bombardment, whereas the oxygen plasma brought about a chemical effect on the PAN fiber surface. The experimental evidences strongly suggested that cyclization of nitrile group and crosslinking were likely to occur in the oxygen-plasma treatment. On the other hand, with the argon-plasma treatment, numerous my pits resulted in ranging from several tens to hundreds nanometers in radius. The plasma sensitivity of functional groups such as C-H, $C{\equiv}N$, and O-C=O groups in the PAN fiber was dependent on their chemical nature of bonding in the oxygen-plasma, in which the ester group was the most sensitive to the plasma. Vacuum-ultraviolet(VUV) radiation emitted during plasma treatment played no substantial role to alter the surface morphology.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.7-12
• /
• 1989

The effects of composition ratios and sintering conditions in Co1-xMgxO ceramics on the sintering characteristics, electrical properties and oxygen sensing characteristics were investigated. In the same sintering conditions, porosity decreased with increase of MgO contents. The relationshiop of temperature and resistance in Co1-xMgxO ceramics showed NTC(negative temperature coefficient) characteristics at the temperature range from $700^{\circ}C$ to 1,10$0^{\circ}C$. In the case of pure CoO, however, the PTC(positive temperature coefficient) characteristics were shown over about 90$0^{\circ}C$. The electrical conductivity of Co1-xMgxO ceramics decreased proportionally with decrease of oxygen partial pressure at the range from 1 to 10-4(atm). Particularly, Co0.5Mg0.5O ceramics showed the highest sensitivity to oxygen gas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.65-65
• /
• 2007

Microstructure and surface roughness of the sensing materials should be improved to use them in advanced sensor applications because the uneven surface roughness degrades the light reflection, pattern resolution, and devices performance. Chemical mechanical polishing (CMP) processing was selected for improving the surface roughness of $CeO_2$ which is one of the well known materials for the oxygen gas sensors. Surface roughness and removal rate of spin coated $CeO_2$ thin films were examined with a change of CMP process parameters such as down force and table speed. The optimized process condition, reflected by the surface roughness with the hillock-free surface as well as the excellent removal rate with the good uniformity, was obtained. The effects of the improved surface roughness on the sensing property of $CeO_2$ thin films were also confirmed. The improved sensitivity of $CeO_2$ thin films for oxygen sensors were obtained after CMP process by the improved surface characteristics. Therefore, we conclude that sensing property of $CeO_2$ thin film is strongly dependent on the surface roughness of $CeO_2$ thin films by using CMP process.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.24-31
• /
• 1999

Ammonia gas sensors were fabricated with ZnO-based thin films grown by RF-magnetron sputtering method. The films which were doped with $MoO_3$ catalysts of various weight percents were grown in different sputtering gases to fabricate the sensors with a high sensitivity, low working temperature and rapid response time. To improve electrical stability, the films were aged in various conditions. The sensors doped with the catalysts and grown in oxygen sputtering gas showed the improvement of sensitivity. These exhibited the increase of surface carrier concentration and electron mobility. The sensor with 0.875wt.% $MoO_3$ catalysts showed the maximum sensitivity of 70 in ammonia gas concentration of 160 ppm at a working temperature of $300^{\circ}C$. The sensor which is aged at $330^{\circ}C$ for 72hrs in oxygen ambient exhibited tourer sensitivity of 57, but more stable properties, excellent linearity.

• Radiation Oncology Journal
• /
• v.30 no.2
• /
• pp.78-87
• /
• 2012

Purpose: Troglitazone (TRO) is a peroxisome proliferator-activated receptor ${\gamma}$ ($PPAR{\gamma}$) agonist. TRO has antiproliferative activity on many kinds of cancer cells via G1 arrest. TRO also increases $Cu^{2+}/Zn^{2+}$-superoxide dismutase (CuZnSOD) and catalase. Cell cycle, and SOD and catalase may affect on radiation sensitivity. We investigated the effect of TRO on radiation sensitivity in cancer cells in vitro. Materials and Methods: Three human cervix cancer cell lines (HeLa, Me180, and SiHa) were used. The protein expressions of SOD and catalase, and catalase activities were measured at 2-10 ${\mu}M$ of TRO for 24 hours. Cell cycle was evaluated with flow cytometry. Reactive oxygen species (ROS) was measured using 2',7'-dichlorofluorescin diacetate. Cell survival by radiation was measured with clonogenic assay. Results: By 5 ${\mu}M$ TRO for 24 hours, the mRNA, protein expression and activity of catalase were increased in all three cell lines. G0-G1 phase cells were increased in HeLa and Me180 by 5 ${\mu}M$ TRO for 24 hours, but those were not increased in SiHa. By pretreatment with 5 ${\mu}M$ TRO radiation sensitivity was increased in HeLa and Me180, but it was decreased in SiHa. In Me180, with 2 ${\mu}M$ TRO which increased catalase but not increased G0-G1 cells, radiosensitization was not observed. ROS produced by radiation was decreased with TRO. Conclusion: TRO increases radiation sensitivity through G0-G1 arrest or decreases radiation sensitivity through catalase-mediated ROS scavenging according to TRO dose or cell types. The change of radiation sensitivity by combined with TRO is not dependent on the PPAR ${\gamma}$ expression level.