• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.358-373
• /
• 2024

Oxygen evolution reaction is a critical bottleneck for the development of efficient electrochemical hydrogen production because of its sluggish reaction. Among various catalysts, transition metal-based layered double hydroxide has drawn significant attention due to their excellent catalytic properties and cost-effectiveness. This paper begins with basic crystal structures, and then conventional adsorbate evolution mechanism of layered double hydroxide. Strategies for enhancing catalytic properties based on adsorbate evolution mechanism and lattice oxygen mechanism that could surpass theoretical limit of adsorbate evolution mechanism are discussed. This paper ends with a brief discussion on the challenges and future directions of layered double hydroxide-based oxygen evolution reaction catalysts.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.549-558
• /
• 2018

The overall efficiency depend on the overpotential of the oxygen evolution reaction in alkaline water electrolysis. Therefore, it is necessary to research to reduce the oxygen evolution overpotential of electrodes. In this study, Ni-Zn-Fe electrodes were prepared by electroplating and the surface area was increased by Zn leaching process. Electroplating variables were studied to optimize the plating parameters(electroplating current density, pH value of electroplating solution, Ni/Fe content ratio). Ni-Zn-Fe electrode, which is electroplated in a modified Watts bath, showed 0.294 V of overpotential at $0.1A/cm^2$. That result is better than that of Ni and Ni-Zn plated electrodes. As the electroplating current density of the Ni-Zn-Fe electrode increased, the particle size tended to increase and the overpotential of oxygen evolution reaction decreased. As reducing pH of electroplating solution from 4 to 2, Fe content in electrode and activity of oxygen evolution reaction decreased.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.120-127
• /
• 2022

Molybdenum disulfide (MoS₂) has been widely used as a catalyst for the bifunctional activities of hydrogen and oxygen evolution reactions (HER and OER). Here, we investigated size dependent HER and OER performance of MoS₂. The smallest size (90 nm) of MoS₂ exhibits the lowest overpotential of -0.28 V at -10 mAcm^-2 and 1.52 V at 300 mAcm^-2 with the smallest Tafel slopes of 151 and 176 mVdec^-1 for HER and OER, respectively, compared to bigger sizes (2 ㎛ and 6 ㎛) of MoS₂. The better HER and OER performance is attributed to high electrochemical active surface area (6 × 10^-4 cm²) with edge sites and low charge transfer resistance (18.1 Ω), confirming that the smaller MoS₂ nanosheets have the better catalytic behavior.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.164-170
• /
• 2021

Vanadium redox flow batteries (VRFB) have emerged as large-scale energy storage systems (ESS) due to their advantages such as low cross-contamination, long life, and flexible design. However, Hydrogen evolution reaction (HER) in the negative half-cell causes a harmful influence on the performance of the VRFB by consuming current. Moreover, HER hinders V²⁺/V³⁺ redox reaction between electrode and electrolyte by forming a bubble. To address the HER problem, carbon nanotube/graphite felt electrode (CNT/GF) with oxygen functional groups was synthesized through the hydrothermal method in the H₂SO₄ + HNO₃ (3:1) mixed acid solution. These oxygen functional groups on the CNT/GF succeed in suppressing the HER and improving charge transfer for V²⁺/V³⁺ redox reaction. As a result, the oxygen functional group applied electrode exhibited a low overpotential of 0.395 V for V²⁺/V³⁺ redox reaction. Hence, this work could offer a new strategy to design and synthesize effective electrodes for HER suppression and improving the energy density of VRFB.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.408-413
• /
• 2022

The oxygen evolution reaction (OER) is very sluggish compared to the hydrogen evolution reaction (HER). Considering this difference is essential when designing and developing a cost-effective and facile synthesis method for a catalyst that can effectively perform OER activity. The material should possess a high surface area and more active sites. Considering these points, in this work we successfully synthesized sheets of cobalt phosphate hydrate (CP) and sulphurated cobalt phosphate hydrate (CPS) material, using simple successive ionic layered adsorption and reaction (SILAR) methods followed by sulfurization. The CP and CPS electrodes exhibited overpotentials of 279 mV with a Tafel slope of 212 mV dec^-1 and 381 mV with a Tafel slope of 212 mV dec^-1, respectively. The superior performance after sulfurization is attributed to the intrinsic activity of the deposited well-aligned nanosheet structures, which provided a substantial number of electrochemically active surface sites, speeded electron transfer, and at the same time improved the diffusion of the electrolyte.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.243-251
• /
• 2023

Developing oxygen evolution reaction (OER) electrocatalysts is essential to accomplish viable CO₂ and water electrolysis. Herein, we report the fabrication and OER performance of Ni-foam (NF)-immobilized Ni₆ nanoclusters (NCs) (Ni₆/NF) prepared by a dip-coating process. The Ni₆/NF electrode exhibited a high current density of 500 mA/cm² for the OER at an overpotential as low as 0.39 V. Ni₆/NF exhibited high durability in an alkaline solution without corrosion. Electrokinetic studies revealed that OER can be easily initiated on Ni6 NC with fast electron-transfer rates. Finally, we demonstrated stable CO₂-to-CO electroreduction using an NC-based zero-gap CO₂ electrolyzer operated at a current density of 100 mA/cm² and a full-cell potential of 2.0 V for 12 h.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.701-705
• /
• 2019

알칼라인 조건에서의 산소발생 반응(oxygen-evolution reaction: OER)은 다양한 에너지 시스템에 중요한 반응으로 여겨지고 있다. 큰 overpotential을 감소시키기 위해 다양한 촉매들이 개발되고 있으며, 그 중 NiO는 높은 활성도에 대한 가능성으로 인해 연구가 활발하게 진행되고 있다. 촉매의 표면에서 OER에 대한 메커니즘은 정확하게 규명되지는 않았지만, 산화물 촉매에서 Ni 또는 O vacancy와 같은 결함들은 많은 전기화학반응에서 활성점으로 여겨진다. 따라서, 본 연구에서는 nitrogen을 ethylenediamine을 이용하여 NiO의 O위치에 치환하여 Ni vacancy를 형성하고 그로 인해서 OER의 activity와 내구성에 어떠한 영향을 미치는지에 대해 분석해 보았다.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.972-976
• /
• 1997

Single phase ruthenium oxides with perovskite (ATi1-xRuxO3 (A=Ca, Sr)) and pyrochlore structure (Bi2Ru2O7, Pb2Ru2O6.5) have been prepared reproducibly by solid state reaction methods and their electrocatalytic activities for oxygen evolution have been examined by Tafel plots. Tafel slopes vary from a low value of 42 mV/decade up to 222 mV/decade at room temperature. The high exchange current densities and high Tafel slopes compared with those obtained from the RuO2 DSA electrode at the crystalline single phase metal oxide electrodes suggest that they are better electrocatalysts at low overpotentials. A favorable change in the Tafel slope for the oxygen evolution reaction occurs as the ruthenium content increases. Substitution of Ti for Ru in the perovskite solid solutions enhanced their chemical stability by losing marginal electrochemical activity.

• 한국재료학회지
• /
• 제32권8호
• /
• pp.339-344
• /
• 2022

The lattice oxygen mechanism (LOM) is considered one of the promising approaches to overcome the sluggish oxygen evolution reaction (OER), bypassing -OOH^* coordination with a high energetic barrier. Activated lattice oxygen can participate in the OER as a reactant and enables O^*-O^* coupling for direct O₂ formation. However, such reaction kinetics inevitably include the generation of oxygen vacancies, which leads to structural degradation, and eventually shortens the lifetime of catalysts. Here, we demonstrate that Se incorporation significantly enhances OER performance and the stability of NiFe (oxy)hydroxide (NiFe) which follows the LOM pathway. In Se introduced NiFe (NiFeSe), Se forms not only metal-Se bonding but also Se-oxygen bonding by replacing oxygen sites and metal sites, respectively. As a result, transition metals show reduced valence states while oxygen shows less reduced valence states (O^-/O₂^2-) which is a clear evidence of lattice oxygen activation. By virtue of its electronic structure modulation, NiFeSe shows enhanced OER activity and long-term stability with robust active lattice oxygen compared to NiFe.

• 세라미스트
• /
• 제22권2호
• /
• pp.182-188
• /
• 2019

Alternative energy sources to the systems using hydrocarbon fuels have been actively developed due to exhaustion of fossil fuels and issue of global warming by CO₂. Fuel cells have attracted great attentions to solve these issues as electricity can be produced with product of clean H₂O by using H₂-O₂ as a fuel. Besides, using reverse reactions make it possible to produce H₂ and O₂ gas from electrolysis of water. There are various fuel cells systems depending on the types of electrolyte, and in this mini-reviews, the main aim is to focus on perovskite oxides as a catalyst for oxygen-evolution reactions in alkaline electrolysis and its potential to application of alkaline electrolysis systems.