• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1469-1472
• /
• 2006

We investigated the electrical and optical properties of ZnO:Al thin films as a function of the thermal process conditions. The film was prepared by RF magnetron sputtering followed by annealing in a box furnace in air. An ZnO:Al (98:2) alloy with the purity of 99.99% (3 inch diameter) was used as the target material. The electrical properties of the transparent electrode, exhibited surface oxidation as a result of rapid oxygen absorption with increasing annealing temperature. The processed ZnO:Al films and commercial ITO(indium-tin-oxide) were applied to an OLED stack to investigate the current density and luminescence efficiency. The efficiency of the device using the ZnO:Al electrode was higher than that from the device using the ITO electrode.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.652-656
• /
• 2003

녹색발광을 하는 스피넬 구조의 ZnGa$_2$O$_4$:Mn 형광체박막을 산소분압비를 증착변수로 이용하여 rf 마그네트론 스퍼터링법으로 증착하였으며, 증착된 박막을 산화, 진공+질소 분위기에서 각각 열처리를 하였다. 증착시 산소분압비 및 열처리시 산소분위기가 형광체 박막의 성장 및 발광특성에 미치는 영향을 관찰하였다. 열처리시 박막의 산화를 막을수록 발광특성이 향상되는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.39-40
• /
• 2005

Ferroelectric Eu-substituted $Bi_4Ti_3O_{12}$ (BET) thin films with a thickness of 200 nm were deposited on Pt(111)/Ti/SiO$_2$/Si(100) substrate by means of the liquid delivery MOCVD system and annealed at several temperatures in an oxygen atmosphere. At annealing temperature above $600^{\circ}C$, the microstructure of layered perovskite phase was observed. The remanent polarization of these films increased with increase in annealing temperature. The remanent polarization values ($2P_r$) of the BET thin films annealed at $720^{\circ}C$ were $37.71{\mu}C/cm^2$ at an applied voltage of 5 V.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.621-627
• /
• 1996

$SrBi_{2x}TaO_9$ ferroelectric thin films were prepared on platinized silicon substrates using MOD proces, and crystallization behavior of the films was investigated with variation of the annealing temperature and Bi content x. Crystalline phase of bismuth layered perovskite structure was formed even by baking the films at $800^{\circ}C$ for 5 minutes in air, and was not changed by annealing at temperatures raning from $700^{\circ}C$ to $900^{\circ}C$ for 1 hour in oxygen ambient. When $SrBi_{2x}TaO_9$ thin films ($0.8\lex\ie1.6$) were annealed at $800^{\circ}C$, Preferred orientation of the films along c-axis was observed with $x\ge1.2$. With increasing Bi content x, surface morphology of the films was changed from equiaxed grains to elongated grains.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.34-46
• /
• 2002

Si-O-C-H films with a low dielectric constant were deposited on a p-type Si(100) substrate using a mixture gases of the bis-trimethylsilyl-methane (BTMSM) and oxygen by an inductively coupled plasma chemical vapor deposition (ICPCYD). High density plasma of about $~10^{12}\textrm{cm}^{-3}$ is obtained at low pressure (<400 mTorr) with rf power of about 300W in ICPCVD where the BTMSM and $O_2$ gases are fully dissociated. Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectroscopy (XPS) spectra show that the film has $Si-CH_3$ and OH-related bonds. The void within films is formed due to $Si-CH_3$ and OH-related bonds after annealing at $500^{\circ}C$ for the as-deposition samples. The lowest relative dielectric constant of annealed film at $500^{\circ}C$ is about 2.1.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 1999

In this paper, the electrical properties of Pt/YMnO$_3$/Si(100) structures with difference rapid thermal annealing (RTA) treatment were investigated. YMnO$_3$films were obtained without buffer layers, introducing oxygen. A typical value of the dielectric constant was about 20 derived from 1MHz capacitance-voltage (C-V) measurement and the resistivity of the film at the field of 150kV/cm was about 1.34$\times$10$^{12}$ $\Omega$ . cm. The minimum interface state density around midgap was estimated to be about 5$\times$10$^{11}$ cm$^2$. eV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.263-266
• /
• 2000

Effects of excess Pb(50 mole ％) on the crystallization properties of amorphous PZT thin films on the glass substrates by post-annealing in oxygen ambient were investigated to lower the crystallization temperature of the PZT thin films with a single perovskite phase. The PZT thin films(350nm) were prepared on Pt/Ti/corning glass(1737) substrates. The PZT thin films and bottom electrode were deposited by RF magnetron sputtering. Crystallization properties of PZT thin films were strongly dependent on RTA(Rapid Thermal Annealing) temperature. We were able to obtain a perovskite structure of PZT at 600$^{\circ}C$ for 10min. After thermal treatments were done, electrical properties such as I-V, P-E, and fatigue were measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.54-57
• /
• 2004

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition(PLD) technique using an Nd:YAG laser with a wavelength of 266 m. During deposition, the experiment of the deposition of ZnO thin films has been performed for substrate temperatures in the range of $400^{\circ}C$ and flow rate of 350 sccm, films have been annealed at various substrate temperatures after deposition. After post-annealing treatment in the oxygen ambient, the structural properties of ZnO thin films were characterized by diffraction (XRD), SEM and the optical of the ZnO were characterized by photoluminescence (PL).

• 한국자기학회지
• /
• 제5권5호
• /
• pp.720-725
• /
• 1995

Bi-substituted gadolinium iron garnet films were deposited on GGG(111) and NGG (111) substrates by irradiating KrF excimer laser onto targets having compositions of $Bi_{x}Gd_{3-x}Fe_{5}O_{12}$ ($2.0{\leq}x{\leq}3.0$) under substrate temperature of $580~620^{\circ}C$. Analysis on structure, composition and angle of Faraday rotation, ${\theta}_{F}$, were carried out. The composition, the structure and the magneto-optical properties of the obtained films were found to be strongly dependent both on the compositions of the targets and on the pressure of oxygen. Before annealing in air, all films showed ${\theta}_{F}{\geq}0$ at ${\lambda}=6328{\AA}$, while several films showed ${\theta}_{F}{\leq}0$ after the annealing. The highest value of Bi-substitution up to x = 1.76 with uniform composition was obtained.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.7-15
• /
• 2004

The ferroelectric SBT thin films as a material of capacitors for non-volatile FRAMs have some problems that its remanent polarization value is relatively low and the crystallization temperature is quite high abovc 80$0^{\circ}C$. Therefore, in this paper, SBTN solution with S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$$O_{9}$ composition was synthesized by sol-gel method. Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. SBTN thin films with 200 nm thickness were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. UV-irradiation in a power of 200 W for 10 min and rapid thermal annealing in a 5-Torr-oxygen ambient at 76$0^{\circ}C$ for 60 sec were used to promote crystallization. The films were well crystallized and fine-grained after annealing at $650^{\circ}C$ in oxygen ambient. The electrical characteristics of 2Pr=11.94 $\mu$C/$\textrm{cm}^2$, Ps＋/Pr＋=0.54 at the applied voltage of 5 V were obtained for a 200-nm-thick SBTN films. This results show that 2Pr values of the UV irradiated and rapid thermal annealed SBTN thin films at the applied voltage of 5 V were about 57% higher than those of no additional processed SBTN thin films. thin films.lms.s.s.