• Journal of Biomedical Engineering Research
• /
• v.41 no.6
• /
• pp.228-234
• /
• 2020

Superparamagnetic iron oxide nanoparticles (SPIONs) are approved by the Food and Drug Administration (FDA) in the United States. SPIONs are used in magnetic resonance imaging (MRI) as contrast agents and targeted delivery in nanomedicine using external magnet sources. SPIONs act as an artificial peroxidase (i.e., nanozyme), and these reactions were highly stable in various pH conditions and temperatures. In this study, we report a nanozyme ability of the clustered SPIONs (CSPIONs) synthesized by the oil-in-water (O/W) method and coated with biocompatible poly(lactic-co-glycolic acid) (PLGA). We hypothesize that the CSPIONs can have high sensitivity toward H2O2 derived from the reaction between a fixed amount of glucose and glucose oxidase (GOX). As a result, CSPIONs oxidized a 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) commonly used as a substrate for hydrogen peroxidase in the presence of H2O2, leading to a change in the color of the substrate. We also utilized a colorimetric assay at 417 nm using various glucose concentrations from 5 mM to 1.25 μM to validate β-D-glucose detection. This study demonstrated that the absorbance value increases along with increasing the glucose level. The results were highly repeated at concentrations below 5 mM (all standard deviations < 0.03). Moreover, the sensitivity and limit of detection were 1.50 and 5.44 μM, respectively, in which CSPIONs are more responsive to glucose than SPIONs. In conclusion, this study suggests that CSPIONs have the potential to be used for glucose detection in diabetic patients using a physiological fluid such as ocular, saliva, and urine.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.176-183
• /
• 2020

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl₂-CaF₂-CaO molten salt at 1,150 ℃. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO₃, with a small t-ZrO₂ peak, unlike the high-intensity tetragonal-ZrO₂ (t-ZrO₂) peak observed for the asreceived specimen. The t-ZrO₂ phase of YSZ is likely stabilized by Y₂O₃, and the leaching of Y₂O₃ results in phase transformation from t-ZrO₂ to m-ZrO₂. CaZrO₃ likely forms from the reaction between CaO and m-ZrO₂. As the exposure time increases, more CaZrO₃ is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y₂O₃) through the pores. This results in greater susceptibility to phase transformation and CaZrO₃ formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.15-17
• /
• 1957

1. Preparation of Titanium tetrachloride; The following precesses were strictly followed as the preliminary step to obtain pure $TiOCl_2$, titanyl chloride; First, pure Titanium Oxide mixed with carbon is rolled into pills. After drying up perfectly, these pills are heated at 900∼1000${\circ}C$. And then the pills are subjected to the flow of $Cl_2$ gas in a quartz tube heated to 900-1000${\circ}C$. Thus Titanium tetrachloride is obtained. 2. Preparation of $TiOCl_2$ ; Yellowish trobrown solution is made by pouring 80 g of conc. HCl (sp.gr. 1.19) to 45 gr of Titanium tetrachloride (approx. 2 times of theoretical amount). Then this solution is kept settled for 5-days in a desiccator filled with phosphorous pentoxide at room temperature. As the colorless amorphous solid thus obtained is washed with aceton, 36.5 g of the pure salt are obtained. 3. Determination of composition. The analysis of the sample taken from the deposit desiccated gives the following data; (A) Qualitative analysis; a) $Ti(OH)_4$ is precipitated by adding NaOH in water solution of the salt. b) Adding $AgNO_3$ solution, the water solution of the salt gives white precipitate of AgCl. c) When acid and $H_2O_2$ are added, the solution turns its color to redish brown (This proves that $TiO^{++}$ was converted into $TiO^{++}$ by oxidation of $H_2O_2$. (B) Quantitative analysis; a) $Ti(OH)_4$ precipitated by $10{\%}$ NaOH isalitatsubjected consecutively to the filtration and ignition in porcelain crucible at approx. 1000${\circ}C$. , then $TiO_2$ thus formed is weighed and calculated into Ti content. b) Chlorine involved in water solution of the salt is determined by Vorhardt method. Result: The values obtained from previous analysis, devied by their atomic weight gives the following composition: Ti : Cl = 1 : 2 Therefore $TiOCl_2$ should be given as its molecular formula. 4. Summary. When $TiCl_4$ is additated into conc. HCl, $TiO^{++}$ formed exists as a stable form, and forms $TiOCl_2$. However $TiOCl_2$ is unstable to heating. When the temperature is raised to $65{\circ}C$the decomposition of the solution is accelerated, and gives $TiO_2$ aq. $TiOCl_2$ in addition is highly hygroscopic.

• Journal of Pharmaceutical Investigation
• /
• v.8 no.2
• /
• pp.1-10
• /
• 1978

During the course of studies on the production of glutathione from yeast, process development and optimization was carried out. The optimal pH for the extraction of glutathione was found to be 2.5 to 4.0 and the maximum yield for glutathione was obtained when the extraction temperature was 25 to $45^{\circ}C$. The cuprous salt of glutathione was recovered maximally at the range of 2 to 4g of cuprous oxide per 10 Kg of compressed yeast. Further purification was needed for the removal of impurities from glutathione. Cation exchange resin, anion exchange resin and Sephadex G-25 were employed for this purpose. 13 to 15 g of glutathione was obtained from 10 Kg of compressed yeast and the purity was above 99.3%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.2
• /
• pp.97-117
• /
• 1997

L-Ascorbic acid 및 그 유도체는 항산화 작용과 미백작용 및 섬유아세포의 생장 촉진과 콜라젠 생합성의 증가시키는 효과가 있으므로 화장품에서 오래 전부터 사용되어 왔다. 본 연구에서는 생체에 대한 안전성과 안정성이 우수한 L-Ascorbic acid 유도체를 개발하기 위하여 인지질과 유사하게 L-Ascorbic acid 에 3-Aminopropane phosphoric acid를 결합하여 L-Ascorbic acid-3-aminopropane phosphoric acid diester를 합성하였다. ASA-APPA 는 2-Chlorotetrahydro-2H-1, 3, 2-oxazaphosphorine P-oxide 와 5, 6-isopropylidene L-Ascorbic acid 를 반응 시킨 후 산 사수분해 반응을 통하여 얻을 수 있었다. ASA-APPA는 수용액에서 안정성이 우수하였으며, 독성실험에서 무독성 물질이며, 인체 첩포 실험에서도 무자극 물질임을 확인하였다. 그리고, ASA-APPA 는 L-Ascorbic acid 와 3-APPA 의 혼합물과 거의 유사한 섬유아세포의 증식효과를 나타내었으며, melanoma 에 대한 멜라닌 생성 억제 실험에서 L-Ascorbic acid phosphate magnesium salt 와 유사한 효과를 보였다. 따라서 ASA-APPA 는 멜라닌 생성 억제 효과와 섬유아세포의 증식 효과를 갖는 새로운 화장품 원료로서 사용이 가능할 것으로 생각된다.

• Natural Product Sciences
• /
• v.9 no.4
• /
• pp.273-277
• /
• 2003

Salicornia herbacea is an annual herb growing in salt marshes and on muddy seashores. Salicornia herbacea has been used as a fork medicine as well as a seasoned vegetable. In fork medicine, Salicornia herbacea has been used to treat a variety of diseases such as constipation, obesity, diabetes, asthma, arthritis and cancer. However, the biological mechanisms for these activities have not been characterized, nor the active components. The immunomodulatory activity of Salicornia herbacea components were studied in the present study. The components of Salicornia herbacea were prepared from the whole plant by passage through a fine screen, and then dialyzed against PBS overnight. Immunomodulatory activities of the Salicornia herbacea components were examined on a mouse macrophage cell line, RAW 264.7 cells. The Salicornia herbacea components were shown to stimulate cytokine production, nitric oxide release, and expression of surface molecules in a dose dependent manner. The Salicornia herbacea components also induced further differentiation of slightly adherent RAW 264.7 cell into strongly adherent macrophages. These results indicate that Salicornia herbacea contains immunomodulator(s) that induces activation of macrophages.

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.292-295
• /
• 2001

A cross-linked solid polymer electrolyte was prepared by copolymerizing photochemically acrylonitrile (AN), oligo(ethylene glycol ethyl ether) methacrylate, oligo(ethylene glycol) dimethacrylate in the presence of lithium perchlorate as a lithium salt, ethylene carbonate-propylene carbonate as a mixed plasticizer, and poly(ethylene oxide) as a polymer matrix. The maximum ionic conductivity of the polymer electrolyte was 2.35$\times$10$\^$-3/ S/cm. The interface resistance of the polymer electrolyte was very low compared to that of the polymer electrolyte without AN. The former electrolyte was stable up to 4.3 V and the Ah efficiency was nearly 100% during the charge-discharge cycle.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.63-65
• /
• 2008

The increased interest in reducing the environmental effects caused by releasing organic compounds and aqueous waste has motivated the development of polymeric materials in supercritical fluids. Recently, supercritical fluids have been used in material synthesis and processing because of their special properties, such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive because it is non-toxic, non-flammable, and has moderate critical temperature and critical pressure values. Supercritical carbon dioxide can also swell most polymers. In this study, we prepared polymer/clay nanocomposites using supercritical fluids. Cloisites 10A, 15A, 25A, and 30B used in this study are montmorillonites modified with a quaternary ammonium salt. The nanocomposites of polymer/clay were characterized by X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.159-162
• /
• 1998

The new type polymer electrolyte composed of polyacrylonitrile(PAN) baed polymer electrolyte contain LiClO$_4$-EC/PC and LiPF$\sub$6/-EC/PC were developed for the weightless and long or life time of lithium polymer battery system with using polyaniline electrode. The gel type electrolytes were prepared by PAN at different lithium salts in the glove box. We prepared for polymer electrolyte with knife casting method. The minimum thickness of PAN gel electrolyte for the slim type is about <400∼500$\mu\textrm{m}$. These gel electrolytes showed good compatibility with lithium electrode. The test cell of Li/polymer electrolyte/Lithium cobalt oxide solid state cell which was prepared by different lithium salt was researched by electrochemical technique. Resistance of polymer electrolyte which consist of LiClO$_4$ is more less than that of LiPF$\sub$6/ and cycle life is more longer than that of LiPF$\sub$6/.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.829-834
• /
• 2010

Ligand variation was carried out on a cobalt(III) complex of Salen-type ligand comprised of 1,2-cyclohexenediamine and salicylaldehyde bearing a methyl substituent on 3-position and -[$CMe(CH_2CH_2CH_2N^+Bu_3)_2$] on 5-position, which is a highly active catalyst for $CO_2$/propylene oxide copolymerization. Replacement of the methyl substituent with bulky isopropyl group resulted in alteration of the binding mode, consequently lowering turnover frequency significantly. Replacement with an ethyl group preserved binding mode and activity. Replacement of the tributylammonium unit with trihexylammonium or trioctylammonium, or replacement of 1,2-cyclohexenediamino unit with -$NC(Me)_2CH_2N$- decreased activity, even though the binding mode was unaltered.