• 한국주조공학회지
• /
• 제25권6호
• /
• pp.226-232
• /
• 2005

Contact material is widely used in the field of electrical parts. Ag-CdO material has a good wear resistance and stable contact resistance. In order to establish optimizing heat treatment condition, rolling temperature and oxidation process, we studied the microstructure of Ag-CdO material with various conditions. The experimental procedure were melting using high frequency induction, heat treatment, rolling and internal oxidation. And we experimented on difference process, Post-oxidaion. In this study, we obtained the optimizing heat treatment condition was $700^{\circ}C$ for 15 min. and the optimizing rolling temperature was $730^{\circ}C$. In investigation of the microstructure of oxidized material, coarse oxide and depleted oxidation layer existed. The hardness was average Hv 70. When we used Post-oxidation, oxides were finer than prior process and depleted oxidation layer did not exist. The hardness of Post-oxidation material was average Hv 80. And the optimizing rolling temperature was $800^{\circ}C$.

• 자원리싸이클링
• /
• 제29권5호
• /
• pp.64-72
• /
• 2020

시멘트 산업의 질소산화물 배출량 감축을 위해 소성로에 다단연소공정을 적용할 경우, 질소산화물을 질소로 환원시키고 미연소 물질을 완전히 연소시켜 연소효율을 증대할 수 있는 산화/환원 구간이 필수적이다. 이에 본 연구에서는 시멘트 소성로 calciner에 산화/환원 구간 설정 시 최종 생산품인 시멘트 클링커의 품질안정성을 확보할 수 있는 최적 산화/환원 소성분위기를 거시적으로 관찰하고자 하였으며, 소성조건에 따른 원료물질의 질량변화, 탈탄산률, 소성완료율 등을 조사하였다. 실험결과, 대체로 환원분위기보다 산화분위기에서 원료물질의 열분해가 촉진되는 경향을 나타내며, 원료물질 자체 성분특성에 따라 비교적 CaO 함량이 높은 석회석의 열분해가 시멘트 조합원료보다 늦게 진행되는 것을 알 수 있었는데 이는 소성로 내 CO₂ 분압에 의한 현상으로 생각된다. 산화/환원 소성분위기에 따른 원료물질의 열분해 특성은 일반적인 석회석 열분해 온도보다 낮은 온도범위에서 비교적 큰 차이를 보였는데, 소성온도 750℃ 구간에 산화분위기 형성에 따라 원료물질의 열효율 향상을 기대할 수 있을 것으로 생각된다. 다만, 본 연구의 경우 실험실 규모의 연구로서 현장공정과는 차이가 있기 때문에, pilot plant 규모의 실검증결과가 필요한 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.148-154
• /
• 2003

The addition of Ni leads to the formation of protective rust layer on steel and subsequently high corrosion resistance of steel in $Cl^-$-containing environment. $\alpha$-FeOOH, $\beta$-FeOOH, $\gamma$-FeOOH and $Fe_3O_4$ are formed mainly on steels exposed to $Cl^-$-containing environment. As the first work of this kind, this study reports the influence of Ni on the oxidation behavior of $Ni_xFe_{1-x}(OH)_2$ in $Cl^-$-containing solution at two different pH regions(condition I under which the solution pH is allowed to decrease and condition I under which solution pH is maintained at 8) where $\gamma$-FeOOH and $Fe_3O_4$ are predominantly formed, respectively, upon oxidation of $Fe(OH)_2$, In the presence of Ni(II) in the starting solution, the formation of $\beta$-FeOOH was facilitated and the formation of $\gamma$-FeOOH was suppressed with increasing Ni(II) content and with increasing oxidation rate of Fe(II). Ni(II) was found to have $Fe_3O_4$-suppressing effect under condition II.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.223-230
• /
• 2011

An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.151-157
• /
• 2014

The degradation mechanisms of thermal barrier coatings (TBCs) were investigated in different thermal fatigue condition in terms of microstructural analyses. The isothermal and cyclic oxidation tests were conducted to atmospheric plasma sprayed-TBCs on NIMONIC 263 substrates. The delamination occurred by the oxide layer formation at the interface, the Ni/Cr-based oxide was formed after Al-based oxide layer grew up to ${\sim}10{\mu}m$ in the isothermal condition. In the cyclic oxidation with dwell time, the failure occurred earlier (500 hr) than in the isothermal oxidation (900 hr) at same temperature. The thickness of Al-based oxide layer of the delaminated specimen in the cyclic condition was ${\sim}4{\mu}m$ and the interfacial cracks were observed. The acoustic emission method revealed that the cracks generated during the cooling step. It was considered that the specimens were prevented from the formation of the Al-based oxide by cooling treatment, and the degradation mode in the cyclic test was dominantly interfacial cracking by the difference of thermal expansion coefficients of the coating layers.

• Journal of Microbiology and Biotechnology
• /
• 제14권3호
• /
• pp.639-642
• /
• 2004

The pH as a control parameter for oxidation-reduction potential (ORP) was investigated through the denitrification by Ochrobactrum anthropi SY509 under non-growing condition. The optimal pH of nitrate reductase was 7.0, and the minimal ORP level was －250 mV for the denitrification under aerobic condition. In the case of anaerobic condition, the optimal pHs of nitrate and nitrite reductase were shifted to 10.0 and 9.0, respectively, and the minimal ORP levels of nitrate and nitrite reductase were decreased to －370 mV and －340mV, respectively. In the case of alkaline pH and anaerobic condition, the denitrification efficiency of nitrate was increased up to about 2-fold over that of neutral pH and anaerobic condition. Therefore, the combined control of pH and ORP in the anaerobic condition is shown to be an important parameter in the biological denitrification process.

• 한국토양비료학회지
• /
• 제29권3호
• /
• pp.243-248
• /
• 1996

잠재 산성황산염토양의 산화과정과 이 토양에서 유래된 잠재 산성황산염토양을 칼럼에 넣고 개량제 시용에 따른 토양특성의 변화에 대한 연구결과는 다음과 같다. 1. 잠재 산성황산염토양의 건조와 담수 조건에서 토양 pH변화는 시간의 경과에 따라 두 조건 모두 낮아지는 경향을 나타내었는데 그 낮아지는 폭이 건조조건에서 더 크게 나타났다. 2. Sulfate-sulfur의 함량은 건조조건에서 증가하였으나 담수상태에서는 점점 감소하는 경향이었으며 sulfide-sulfur의 함량은 담수조건이 더 높게 나타났다. 3. 2가 철의 함량은 시간의 지남에 따라 담수조건에서 함량이 더 높았고 건조조건에서는 서서이 감소하는 경향이었으며 치환성 알루미늄의 함량은 건조와 담수 두 조건에서 모두 증가하였다. 4. 컬럼을 이용한 모델실험에서 잠재 산성황산염토양에 농용석회, 암모니아수를 처리하여 중화시킨 후시간이 경과됨에 따라 대조구에 비하여 pH가 상승하였지만 그 효과가 크게 나타나지는 않았다. $Eh_6$는 암모니아수 처리가 제일 낮았으며 다음이 농용석회, 대조구의 순서였다. 5. 칼럼용출액 중의 sulfate-sulfur와 치환성 알루미늄의 함량은 시간이 경과함에 따라 모든 처리구에서 감소하는 경향이었고, sulfide-sulfur와 2가 철의 함량은 증가하는 경향이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.429-429
• /
• 2012

To investigate the gettering effect of B-doped n-type monocrystalline silicon wafer, we made the p-n junction by diffusing boron into n-type monocrystalline Si substrate and then oxidized the boron doped n-type monocrystalline silicon wafer by in-situ wet and dry oxidation. After oxidation, the minority carrier lifetime was measured by using microwave photoconductance and the sheet resistance by 4-point probe, respectively. The junction depth was analyzed by Secondary Ion Mass Spectrometry (SIMS). Boron diffusion reduced the metal impurities in the bulk of silicon wafer and increased the minority carrier lifetime. In the case of wet oxidation, the sheet resistance value of ${\sim}46{\Omega}/{\Box}$ was obtained at $900^{\circ}C$, depostion time 50 min, and drive-in time 10 min. Uniformity was ~7% at $925^{\circ}C$, deposition time 30 min, and drive-in time 10 min. Finally, the minority carrier lifetime was shown to be increased from $3.3{\mu}s$ for bare wafer to $21.6{\mu}s$ for $900^{\circ}C$, deposition 40 min, and drive-in 10 min condition. In the case of dry oxidation, for the condition of 50 min deposition, 10 min drive-in, and O2 flow of 2000 SCCM, the minority carrier lifetime of 16.3us, the sheet resistance of ${\sim}48{\Omega}/{\Box}$, and uniformity of 2% were measured.

• 한국환경과학회지
• /
• 제14권5호
• /
• pp.513-520
• /
• 2005

For the destruction of toxic chlorinated organic compounds, this study proposes improved supercritical water oxidation method (multistep oxidation) using sodium nitrate as an oxidizer. This method solves the problems involved in the existing supercritical water oxidation method. Multistep oxidation means that $NaNO_3$ is oxidized to $N_2\;via\;NaNO_2$ and NO. Toxic and hard to destroy organic substances like para-dichlorobenzen(4-DCBz), polychlorinate biphenyl(PCB) ware oxidized to non toxic substances in a condition, in which rapid pressure and temperature rise is restrained as much as possible. 4-dichlorobenzene(4-DCBz) and Polychlorinate biphenyl(PCB) in condition$(450^{\circ}C,\;p_w=0.25g/cm^3,\;30min)$ Was discomposed perfectly.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.141-147
• /
• 2003

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of $150^{\circ}C^{\sim}180^{\circ}C$ but decreased beyond 190$^{\circ}C$. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.