• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.85-90
• /
• 2013

시간지연을 갖는 불안정한 시스템의 PID 제어는 적용하기가 쉽지 않은데 이는 복소평면의 우반부에 존재하는 극점으로 인한 불안정성과 시간지연의 영향 때문이다. 본 연구에서는 설계자가 제어환경에 따라 오버슈트나 상승시간 등을 미리 정의한 경우의 PID 제어기 설계 기법에 대해 고려한다. 이와 같이 제약성을 갖는 최적화 문제를 해결하기 위해 본 연구에서는 벌점전략이 결합된 RCGA를 사용한다. 이는 제약조건을 위배하면 그 정도에 따라 벌점을 부가하도록 벌점함수를 정의하고, 평가함수에 합하여 비제약성 최적화 문제로 변환하는 방법이다. 제안하는 방법은 불안정 FOPTD 시스템에 적용하고 시뮬레이션을 실시하여 그 유효성을 검토한다.

• Journal of Biosystems Engineering
• /
• 제35권4호
• /
• pp.224-230
• /
• 2010

The purpose of this study was to develop position control system of an electric actuator for automatic shuttle shifting of a tractor. The electric actuator was installed at the link of the forward-reverse gearshift of the tractor transmission, and controlled in the ranges of forward, neutral, and reverse positions. The position control system of the electric actuator was developed based on PID (Proportional Integral Derivative) controller and transfer function of the electric actuator. The coefficients of the PID controller were determined by Ziegler-Nichols (Z-N) method and optimized using simulation program. The prototype AMT (Automated Manual Transmission) test unit of the tractor was installed and used to evaluate the performance of the position control. The evaluation system for the control performance consisted of forward-reverse actuator, motor driver, and controller. The tests were conducted as the controlled positions of the actuator were changed from neutral position to forward, neutral, and reverse positions in sequence. The sequential tests were repeated 20 times. The operations of changing the gearshift were considered as the step response of the control system. Maximum overshoot, settling time, and steady-state error were analyzed. The results showed that performance of the position control system was reasonable and qualified. The maximum overshoots, the steady-state errors, and the settling times of the position control system were 10~20%, 1~5%, and 0.92~1.49 sec, respectively. The modifications of the electric actuator will be required to enhance the performance of position control during field operation.

• 대한의용생체공학회:의공학회지
• /
• 제3권1호
• /
• pp.23-30
• /
• 1982

The regimen of physical activity of the patient with coronary artery disease requires that he should not overshoot the prescribed heart rate based on his age, health and fuctional status of the heart during his exercise. The step input of work load, however, involves a great danger of overshooting. The purpose of this study was to desigil a system that makes it passible for a subject to check the overshooting. This system shows on tile H.R-meter, the amplified and filtered heart-rate signal of the subject received by the photosensor on his earlobe, puts it in the lead coinpensational circuit where it is conpared with the reference input signal(=the presfribed heart rate). The output of the lead compensational circuit works the aull meter. By means of this null meter, the subject knows whether he is overshooting the prescribed heart rate or not. He can continue the natl meter needle at the'Zero'position through the control of the speed of pedaling of the bicycle ergometer, An experimental test, made on eight men and four women in healthy condition, showed that 91. 7% of them vlaintained the stable heart rate and that the overshooting of the desired heart rate did not exceed $\pm$2BPM. According to the result of this experiment, since the heart rate feedback controller makes it possible for the subject to take the prescribed exercise based not on the work load but on the heart rate which incidentally is inexpensive, it can be made use of as the instrument for the regimen of pflysical activity by the patient with coronary artery disease.

• The Korean Journal of Physiology
• /
• 제22권2호
• /
• pp.219-230
• /
• 1988

The effect of glycine, structurally the most simple amino acid was investigated on the electrophysiological characteristics of the isolated superfused atrial muscle and sinus node cells of the rabbit heart. Superfusion of the sinus node cell with glycine solution (3, 5 and 8 mM) produced concentration-dependent increments of OS (overshoot potential) and MDP (maximum diastolic potential). Generally action potential amplitude increased as a result of greater increment of OS than that of MDP. The changes in action potential of the sinus node cell peaked in $7{\sim}10{\;}minutes$ after onset of superfusioin. On the contrary to the response to intravenously administered glycine, the rate of spontaneous firing of sinus node cell was invariably increased following superfusion with glycine. Action potential duration manifested as $APD_{60}$ (time to 60% repolarization) was significantly shortened by glycine. And the electrophysiological effects of glycine on the atrial muscle cell were similar to that on the sinus node cells. The results of present study suggest that glycine can exert direct effects on the atrial muscle and sinus node cells of the rabbit heart.

• The Korean Journal of Physiology
• /
• 제22권2호
• /
• pp.207-218
• /
• 1988

Effects of 1, 4-dihydropyridine compounds, such as nifedipine, nisoldipine, nitrendipine, and nimodipine which were calcium antagonists on the normal and Ca-dependent, slow channel mediated action potentials in the guinea pig's papillary muscle were investigated. The glass microelectrode was impaled into a papillary muscle cell for measurements of potential changes with the simultaneous tracing of isometric contraction. The concentration of Ca antagonists were 1 mg/l (nifedipine and nisoldipine), 2 mg/l (nitrendipine and nimodipine), which showed the maximal inhibition of isometric contraction (above 90%) and simultaneous effects on the normal action potentials and only the halves of those concentrations were sufficient to observe the effects on the calcium action potentials. The data for analysis were only chosen when the microelectrode was maintained in a cell throughout the experiments. 1, 4-Dihydropyridine compounds decreased the action potential duration but did not affect the resting membrane potential, overshoot, and upstroke velocity of the normal action potentials with the decrease in the isometric contraction. And with the decrease in the area and amplitude of isometric contraction, the area, amplitude, upstroke velocity and duration of Ca action potential was decreased. But the differences in the effects of the Ca antagonists were not observed. Therefore it is inferred that the changes in normal and Ca action potential induced by the 1, 4-dihydropyridine compounds with a common chemical structure would be caused by the slow inward Ca-current, not by a fast Na-current.

• 한국항해항만학회지
• /
• 제36권1호
• /
• pp.15-20
• /
• 2012

예선이 부선을 선미예인하고 있는 상황에서의 예부선 조종특성을 확인하기 위하여, 예선 단독 실선시운전과 예부선 통합 실선시운전 시험을 수행하였다. 속력시험, 가감속시험, 10도 선회시험, 20도 선회시험, 10도 지그재그시험, 20도 지그재그시험을 통하여 다양한 상황에서의 예선과 부선의 운항 특성을 확인하였다. 그 결과, 부선이 선미예인되는 경우, 예선의 전술선회직경은 예선 단독운항일 때보다 증가하며, 선수동요각 변화율이 낮음을 확인하였고, 침로 변경을 함에 있어 부선의 선수동요각 변화가 늦고, 오버슈트각이 큰 것을 확인하였다. 또한 선회나 침로 변경 시, 부선의 선회궤적이 예선의 선회궤적 안쪽에도 존재할 수 있음을 확인하였다. 따라서 부선을 선미예인하는 운항자는, 선회 및 침로변경 시 예부선의 선회궤적, 예부선의 선수동요각 변화시간 및 오버슈트각이 증가하는 것을 충분히 인지하고 운항해야 할 것으로 판단된다.

• 한국항해항만학회지
• /
• 제31권6호
• /
• pp.515-521
• /
• 2007

컨테이너 화물의 복합운송시스템 중에서 체화현상은 항만에서 가장 심각하다. 이러한 문제를 해결하기 위해 해상과 육상의 경계선에서 체선체화 문제를 발생시키는 컨테이너 크레인의 직업효율을 향상시키는 방법을 생각할 수 있다. 이를 위해 본 연구에서는 가능한 범위에서 트롤리를 목표지점까지 빠르게 이동시키는 동시에 목표위치에서의 흔들림도 짧은 시간 내에 제어하는 문제를 다루고 있다. 제어 전략으로 설계된 구간에서 최적의 성능과 강인성이 보장되는 LQ 제어와 제약조건에서 최적화가 가능한 실수코딩 유전알고리즘을 결합한다. 컴퓨터 시뮬레이션을 통해 제안한 제어기가 설정한 설계사양을 완벽하게 만족하는 것을 보임으로 그 유효성을 증명한다.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1303-1313
• /
• 2014

Dynamic behavior of the harmonic detection part of an active power filter (APF) has an essential role in filter compensation performances during transient conditions. Instantaneous power (p-q) theory is extensively used to design harmonic detectors for active filters. Large overshoot of p-q theory method deteriorates filter response at a large and rapid load change. In this study the harmonic estimation of an APF during transient conditions for balanced three-phase nonlinear loads is conducted. A novel fuzzy instantaneous power (FIP) theory is proposed to improve conventional p-q theory dynamic performances during transient conditions to adapt automatically to any random and rapid nonlinear load change. Adding fuzzy rules in p-q theory improves the decomposition of the alternating current components of active and reactive power signals and develops correct reference during rapid and random current variation. Modifying p-q theory internal high-pass filter performance using fuzzy rules without any drawback is a prospect. In the simulated system using MATLAB/SIMULINK, the shunt active filter is connected to a rapidly time-varying nonlinear load. The harmonic detection parts of the shunt active filter are developed for FIP theory-based and p-q theory-based algorithms. The harmonic detector hardware is also developed using the TMS320F28335 digital signal processor and connected to a laboratory nonlinear load. The software is developed for FIP theory-based and p-q theory-based algorithms. The simulation and experimental tests results verify the ability of the new technique in harmonic detection of rapid changing nonlinear loads.

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.897-901
• /
• 2011

This paper presents a TS (Takagi-Sugeno) type FLC (Fuzzy Logic Controller) with only 3 rules. The choice of parameters of FLC is very difficult job on design FLC controller. Therefore, the choice of appropriate linguistic variable is an important part of the design of fuzzy controller. However, since fuzzy controller is nonlinear, it is difficult to analyze mathematically the affection of the linguistic variable. So this choice is depend on the expert's experience and trial and error method. In the design of the system, we use a variety of response characteristics like stability, rising time, overshoot, settling time, steady-state error. In particular, it is important for a stable system design to predict the steady-state error because the system's steady-state response of the system is related to the overall quality. In this paper, we propose the method to choose the consequence linear equation's parameter of T-S type FLC in the view of steady-state error. The parameters of consequence linear equations of FLC are tuned according to the system error that is the input of FLC. The full equation of T-S type FLC is presented and using this equation, the relation between output and parameters can represented. As well as the FLC parameters of consequence linear equations affect the stability of the system, it also affects the steady-state error. In this study, The system according to the parameter of consequence linear equations of FLC predict the steady-state error and the method to remove the system's steady-state error is proposed using the prediction error value. The simulation is carried out to determine the usefulness of the proposed method.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.195-201
• /
• 2020

본 논문에서는 쿼드콥터형 드론 시스템을 구현하고, PID 제어기에서 안정화 시간을 최소화할 수 있는 이득 계수를 구하기 위한 경험적 방법을 제안하였다. 드론 자세 안정화 제어 시스템은 가속도 센서와 자이로 센서의 자세 정보를 마호니 필터를 통해 보정한 후 PID 제어기를 통해 4개의 모터를 구동한다. 제안된 방법은 기존의 지글러-니콜스 방법을 통해 1차적으로 이득 계수를 구한 후에 각각의 이득 계수를 경험적 방법으로 다시 최적화하는 단계를 거쳐서 결정한다. 최종적으로 구해진 이득 계수를 구현된 시스템에 적용하여 롤 방향으로 20도 회전하는 실험을 수행한 결과 기존의 지글러-니콜스 방법에 비해 최대 오버슈트는 44.3도에서 29.8도로 감소하면서도 안정화시간이 2.6초에서 1.7초로 개선됨을 확인할 수 있었다. 따라서 제안된 방식은 최적의 이득 계수를 구하기 위한 시행착오를 줄이면서도 드론과 같이 모터 잡음이 심한 환경에서도 잘 동작함을 실험을 통해 증명하였다.