• ETRI Journal
• /
• v.25 no.5
• /
• pp.345-355
• /
• 2003

In this paper, we propose a method for designing a class of M-channel, causal, stable, perfect reconstruction, infinite impulse response (IIR), and parallel uniform discrete Fourier transform (DFT) filter banks. It is based on a previously proposed structure by Martinez et al. [1] for IIR digital filter design for sampling rate reduction. The proposed filter bank has a modular structure and is therefore very well suited for VLSI implementation. Moreover, the current structure is more efficient in terms of computational complexity than the most general IIR DFT filter bank, and this results in a reduced computational complexity by more than 50% in both the critically sampled and oversampled cases. In the polyphase oversampled DFT filter bank case, we get flexible stop-band attenuation, which is also taken care of in the proposed algorithm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.808-815
• /
• 1990

This paper treats with the design method for the single loop oversampled Sigma-Delta A/D converter with one delay and the digital integrator. Such an integrator was kgenerated by means of the bilinear transform of the analog integrator. The frequency spectrums of the quantizer and the decimator output signal are evaluated by FFT respectively. With the performance evaluation system, the values of SNR are obtained versus the input sinusoidal signal amplitude, frequency, the oversampling ratio, the DC-input level, the loop gain and the limitting value of the integrator. As compared with existing results, values of SNR versus the input signal amplitude and the oversampling ratio for the suggested system are about 6dB higher then previously reported results respectively. Furthermore, this approach achieves an about 60dB input dynamic range.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.489-492
• /
• 1995

This paper has represented the new system for a multibit oversampled sigma-delta A/D convertor. The novel digital correction scheme with the ROM-Table is employed to enhance SNR without requiring accurate precision of the analogue components. This architectures have a good features compared with the 1-bit approach, including significantly lower quantization noise for a given oversampling ratio, as well as improved stability characteristics. Then we have shown the validity of the proposed system by use of the software for the performance evaluation and by realizing the system with SCFs(switched capacitor filter).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.431-437
• /
• 2019

PLC(Power Line Communication) is being used in various ways in smart grid system because of the advantages of low cost and high data throughput. However, power line channel has many problems due to impulse noise and various studies have been conducted to solve the problem. Recently, ACDL(Adaptive Cannonical Differential Limiter) which is based on an adaptive clipping with analog nonlinear filter, has been proposed and performs better than the others. In this paper, we show that ACDL is similar to the detection of slew rate with oversampled digital signal by simplification and analysis. Through the simulation under the PRIME standard it is shown that the proposed performs equal to or better than that of ACDL, but significantly reduce the complexity to implement. The BER performance is equal but the complexity is reduced to less than 10%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2275-2293
• /
• 2020

This paper focuses on the simplified receiver design for multi-user circular block oversampled filter bank (CB-OSFB) uplink systems. Through application of discrete Fourier transform (DFT), the special banded structure and circular properties of the modulation matrix in the frequency domain of each user are derived. By exploiting the newly derived properties, a simplified zero-forcing (ZF) receiver is proposed for multi-user CB-OSFB uplink systems in the multipath channels. In the proposed receiver, the matrix inversion operation of the large dimension multi-user equivalent channel matrix is transformed into DFTs and smaller size matrix inversion operations. Simulation is given to show that the proposed ZF receiver can dramatically reduce the computational complexity while with almost the same symbol error rate as that of the traditional ZF receiver.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.189-198
• /
• 2009

In this paper, we propose a method to improve the performance of orthogonal frequency division multiplexing (OFDM) receivers by using oversampling the received signals. Demodulation of the received OFDM signals is to detect the amplitude and phase components of the subcarriers. From the oversampled OFDM signals, we can get redundant informations in frequency domain for the data, which are different in phase but the same in amplitude. By using these properties, we can obtain signal to noise ratio (SNR) gain by the oversampling ratio compared to the receivers which sampled with symbol rate. In this paper, we propose oversampled receivers whose oversampling ratio is expanded from integer to general rational number. Through computer simulations, we show the validity of the proposed methods by comparing the performance of the receivers with nonideal band-limiting filters.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1305-1316
• /
• 2021

In this study, a new empirical formula for 2D transverse dispersion coefficient was developed using the results of previous tracer test studies, and the performance of the formula was evaluated. Since many tracer test studies have been conducted under the conditions where the width-to-depth ratio is less than 50, the existing empirical formulas developed using these imbalanced tracer test results have limitations in applying to rivers with a width-to-depth ratio greater than 50. Therefore, in order to develop an empirical formula for transverse dispersion coefficient using the imbalanced tracer test data, the Synthetic Minority Oversampling TEchnique (SMOTE) was used to oversample new data representing the properties of the existing tracer test data. The hydraulic data and the transverse dispersion coefficients in conditions of width-to-depth ratio greater than 50 were oversampled using the SMOTE. The reliability of the oversampled data was evaluated using the ROC (Receiver Operating Characteristic) curve. The empirical formula of transverse dispersion coefficient was developed including the oversampled data, and the performance of the results were compared with the empirical formulas suggested in previous studies using R². From the comparison results, the value of R² was 0.81 for the range of W/H < 50 and 0.92 for 50 < W/H, which were improved accuracy compared to the previous studies.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.861-865
• /
• 1991

Sigma delta modulation has been the preferred technique for oversampling conversion. In this paper we present the basic principles of oversampled sigma-delta Converters. Basic operation and theory behind sigma-delta modulation is reviewed. The different structures of the sigma-delta converters are described and the concepts of designing modulators and digital filters are discussed. The latest designs are also reviewed.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.851-859
• /
• 2006

The family income distributions of NLSY97 and CPS youth data are compared by using the generalized beta distribution of the second kind. The null hypothesis that the two data sets represent the same underlying population is rejected. The ML estimation suggests that NLSY97 data are oversampled in an income group of $11,308 or less, by about 15.7% compared to CPS data.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.997-1004
• /
• 2012

In this paper, we propose and implement a signal quality measurement algorithm for CDMA2000 1x terminal. The proposed algorithm is suitable to be implemented in software on a PC-based platform and extract the received signal after carrying out equalization, PN code acquisition and tracking, frequency and phase offset compensation with 4-oversampled input signal. Then, through despreading and demodulation with the extracted signal, the proposed algorithm regenerate the reference signal to be used in measurement. The signal quality is measured using this regenerated signal and the extracted signal.