• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.181-190
• /
• 2010

A multitude of overlay network designs for resilient routing, multicasting, quality of service, content distribution, storage, and object location have been proposed. Overlay networks offer several attractive features, including ease of deployment, flexibility, adaptivity, and an infrastructure for collaboration among hosts. In this paper, we explore cooperation among co-existing, possibly heterogeneous, overlay networks. We discuss a spectrum of cooperative forwarding and information sharing services, and investigate the associated scalability, heterogeneity, and security problems. Motivated by these services, we design Synergy, a utility-based overlay internetworking architecture that fosters overlay cooperation. Our architecture promotes fair peering relationships to achieve synergism. Results from Internet experiments with cooperative forwarding overlays indicate that our Synergy prototype improves delay, throughput, and loss performance, while maintaining the autonomy and heterogeneity of individual overlay networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.57-66
• /
• 2010

Today the various types of communication and application service are provided by the development of Internet and IP technologies. It is expected to be extended the service domain of two networks through the interconnecting P2PSIP overlay which is highlighted as an important technologies for Internet based services and IMS(IP Multimedia Subsystem) which is the new architecture adopted in the evolution of NGN. Therefore, this paper explains the possible methods of the service expansion with interconnecting P2PSIP overlay and IMS network. Specially this paper suggests the interconnection architectures of P2PSIP overlay and IMS network as subscriber's types and analyzes the traffic analysis model and session set up delay characteristics by simulation model. As a results, this paper shows that the interconnection architecture using gateway AS(Application Server) is the excellent method to interconnect the IMS in case of P2PSIP overlay only subscriber, and that interconnection architecture using I-CSCF is good method to interconnect the IMS in case of P2PSIP overlay and IMS subscriber.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.627-634
• /
• 2006

Overlay network eliminates the need to change the application-layer tree when the underlying network changes and enables the overlay network to survive in environments where nonmember nodes do not support multicast functionality. An overlay protocol monitors group dynamics, while underlying unicast protocols track network dynamics, resulting in more stable protocol operation and low control overhead even in a highly dynamic environment. But, if overlay multicast protocols does not know the location information of node, this makes it very difficult to build an efficient multicasting tree. So, we propose a Hierarchical Overlay Multicast Architecture (HOMA) with the location information. Because proposed architecture makes static region-based dynamic group by multicast members, it is 2-tired overlay multicasts of application layer that higher layer forms overlay multicast network between members that represent group, and support multicast between multicast members belonging to region at lower layer. This use GPS, take advantage of geographical region, and realizes a region-sensitive higher layer overlay multicast tree which is impervious to the movements of nodes. The simulation results show that our approach solves the efficiency problem effectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1037-1040
• /
• 2006

This paper presents an efficient overlay multicast routing protocol (ROMP) and its architecture. ROMP using GPS and region map stands on the basis of scalable 2-tiered multicast architecture and maintains a global overlay multicast tree through reactive fashion. With this approach, the coarse-grain location-awareness for an efficient overlay multicasting and the determination of hot-spot area for efficient data delivery are feasible. The simulation results show that the localized control packets of ROMP prevent the overlay control packets from squandering the physical network resources.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.490-496
• /
• 2018

The consistency of the initially designed waves in the domain is essential for accurate calculation of the added resistance in waves through CFD. In particular, unwanted reflected waves at domain boundaries can cause incorrect numerical solutions due to the superposition with initially designed waves. Euler Overlay Method(EOM) is one of the methods for reducing wave reflections by adding an additional source term to momentum and phase conservation equations, respectively. In this study, we apply the Euler Overlay Method(EOM) to the open-source CFD library, OpenFOAM(R), to simulate the accurate free-surface waves in the domain and the parametric study is performed for efficient implementation of Euler Overlay Method(EOM). Considering that the damping efficiency depends on the selection of the overlay parameter in the added source terms, the size of overlay zone and the wave steepness, the influences of these factors are tested through the wave elevation measured at constant time intervals in the 2D numerical wave tank. Through this process, guidelines for selection of optimal overlay parameter and overlay zone size that can be applied according to the scaling law are finally presented.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.659-669
• /
• 2010

The P2P IPTV will create a new paradigm for the Internet services. However, it cannot guarantee the reliability of their server and QoS because of using common Internet users(peers) for SIP server or relay server, though the infrastructural cost is low. This paper proposes the ISP-based P2P IPTV architecture which can solute the limitations of conventional P2P-based IPTV. In this model, ISP can build P2P overlay network with ISP servers and directly manage each server needed for session connection. So, the servers have higher performance and better reliability than previous one. Besides, robustness is improved because each sever is set by P2P overlay network. To evaluate the characteristics of the ISP-based P2P IPTV architecture, we simulate it for some parameters which are end-to-end streaming delay time, connection delay time and traffic amount. We compared the proposed architecture with the conventional P2P architecture about video service and confirmed that the performance of ISP-based P2P IPTV is better than conventional P2P based IPTV.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.126-132
• /
• 2010

High wear resistances are obtained with an additional coating of the surface of the decor film in the same operation of impregnating with low viscosity melamine resin by liquid overlay system. The cellulosic fibers have a good adhesion to the corundum particles and keep them sufficiently homogeneous in the blend with the resin. The amount of these fibers in nearly as big as it is in a common overlay in relation to the resin. Therefore these fibers keep the resin inside during the press process and consequently very the surface of the decor print of the film. That means that the corundum particles are equally dissipated throughout the entire layer over the decor. The change of the color of the print is nearly not visible as the particles are almost equally dissipated. Looking to the flooring purposes of liquid overlay one can see that by the lesser exposure of the corundum particles on the very surface, there is no longer an abrasive surface but a feeling like a normal melamine surface.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.333-336
• /
• 2009

DSON is a service overlay network architecture that can guarantee end-to-end quality of service to home network area. DSON makes service possible to be provided dynamically. This paper gives service model and scenario using DSON architecture.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.306-317
• /
• 2009

We consider the problem of architecting a reliable content delivery system across an overlay network using TCP connections as the transport primitive. We first argue that natural designs based on store-and-forward principles that tightly couple TCP connections at intermediate end-systems impose fundamental performance limitations, such as dragging down all transfer rates in the system to the rate of the slowest receiver. In contrast, the ROMA architecture we propose incorporates the use of loosely coupled TCP connections together with fast forward error correction techniques to deliver a scalable solution that better accommodates a set of heterogeneous receivers. The methods we develop establish chains of TCP connections, whose expected performance we analyze through equation-based methods. We validate our analytical findings and evaluate the performance of our ROMA architecture using a prototype implementation via extensive Internet experimentation across the PlanetLab distributed testbed.