• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.11-21
• /
• 2015

According to the damage investigation in 2002, the failures of river levee were caused by overflow, erosion, and unstable body conditions due to piping, inappropriate embanking materials, and poor compaction. Especially, overflow was identified as a main reason that induces levee failure by 39.5% from the distribution of failure types. The major parameters, such as levee collapsing angle (${\theta}$), levee collapsing rate (k) affect inundation velocity and area size during the analysis of inundation modeling, however, domestic research effort on this area is still insufficient. In this paper authors conducted levee failure experiments of 4 levee height types, 0.20 m, 0.25 m, 0.30 m, and 0.40 m based on theassumption of Froude Similarity (${\lambda}_{Fr}=1$). As a result, the authors suggested a levee failure mechanism according to the levee heights (H), a collapse extension lengthwhich is around, levee collapse angle (${\theta}$), levee collapse rate (k).

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.71-75
• /
• 2013

This study is to evaluate the effects of the separation wall on the sediment quality and quantity in a combined sewer, by surveying the sewer overflow and sediments during a rainfall. Since the separation wall installed in the combined sewer separates the rainfall and the sewage, the flow rate of the sewage is increased, and the amount of the sediment deposited on the sewer is decreased. One sampling point was the outfall of Daesacheon with a separation wall, and the other was the outfall of Gwaryecheon without a separation wall, in Daejeon metropolitan city. The maximum control of the biochemical oxygen demand (BOD) overflow load was more than 38% in the Daesacheon point with the separation wall, during a rainfall of 0.11 mm/hr. The maximum control of the BOD overflow load was 24% in Gwaryecheon without a separation wall, during a rainfall of 1.0 mm/hr. According to the survey results of the sediment in the sewer, the discharged sediment deposited on the sewer in Gwaryecheon point was about 23% to 28% of the total suspended solid during the rainfall. In addition, the average velocity of sewage in the presence of sediment was about 0.30 m/s, and if the separation wall is installed, it was expected to be about 1.01 m/s, that is 3.4 times more than the same conditions, resulting in the reduction of the sediment deposit.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.9-18
• /
• 2007

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.569-577
• /
• 2019

Urban flooding has been a frequent phenomenon in recent years caused by the increase in maximum stormwater runoff arising from abnormal rainfall due to global warming, urban development, and development of lowlands according to population inflows. In order to respond positively against abnormal precipition in the city, it is necessary to check the GWI (Green Water Infra) effect and effectively utilize the existing stormwater detention tanks and treat stormwater to prevent local flooding. In this study, Overflow Type stormwater drainage methods are evaluated as a method of preventing urban flooding in abnormal precipitation using the Dynamic Wave Analysis SWMM (Storm Water Management Model) provided by the United States Environmental Protection Agency. Comparing and analyzing the Upward Watergate Type and Overflow Type, it was analyzed that the Overflow Type reduces the maximum flood discharge by 61 % and the total flood volume by 56 % in the rainfall of Typhoon Kong-rey. The application of the Overflow Type and the natural-pneumatic drainage method to the rainfall of Typhoon Soulik resulted in a 20 % reduction in maximum flood runoff and a 67 % reduction in total flood quantity. Therefore, as a solution to the abnormal rain fall, it is possible to improve the existing stormwater detection tank and install additional facilities. It is expected to be economically possible to strom drainage under limited conditions.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.107-115
• /
• 2009

The labyrinth weir can be applied to increase the overflow rate, maintain constant water depth and improve water quality. This weir can be defined that the plane shape of overflow part is not straight line and is a kind of weir having overflow length increased by changing its plane shape. There are relatively few studies related to effect of maintaining the water depth which has been used to consider for various functions as hydraulic facilities and design conditions of labyrinth weirs. Thus, it is needed to conduct studies related to the maintenance of water depth by the labyrinth weir. This study was to provide fundamental data which may become a facilitator for more accurate and proper design of hydraulic facilities related to the maintenance of water depth. The ranges of constant water depth ($H_t/P=0.08\sim0.27$) were provided for the triangle type labyrinth weir, and the effect of maintaining water depth was analyzed using hydraulic laboratory experiments and 3D-numerical simulations(Flow-3D).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.113-113
• /
• 2017

중소하천에서 홍수 시 보 주변 흐름은 잠수월류(submerged overflow)의 형태이고, 이러한 조건 하의 보 파괴원인 중 가장 큰 부분은 제방과의 연결부에서 발생하는 세굴로 인한 것이다. 그러나 하천설계기준(2009)에서는 보 연결부 보호공에 대해 수리학적 특성과 유사적 특성을 고려한 적절한 세굴 범위를 제시하지 못하고 있는 실정이다. 또한 기존의 연구들은 주로 고정상 실험결과를 이용하여 세굴범위를 제시하고 있으며, 제체의 재료적 특성을 고려한 연구가 상대적으로 미약한 실정이다. 이에 본 연구에서는 제체의 재료적 특성(점성을 가진 유사 특성)을 고려하여 잠수월류 시 보 하류부 제방의 세굴길이를 도출하였다. 본 연구방법으로 이론적 접근에서 보 연결부 세굴을 유발하는 주요인자들을 활용하여 관계식을 제안하였고, 수리실험을 통해 제안된 식의 검증을 수행하였다. 수리실험은 균일 사다리꼴 단면의 직선 수로($7.0m(L){\times}2.0m(B){\times}0.5m(H)$)에서 이동상 제방구간(2.0m)과 고정상 제방구간을 나누어 실험의 효율성을 높이고자 하였으며, 이동상 제방 전용 다짐판 및 다짐 봉 등 자체적으로 제작된 실험 장비들이 이용되었다. 실험결과와 제시된 이론적 접근의 비교를 통해 제시된 이론식이 제체의 다짐도의 영향이 고려가 되지 않았음을 가정하였으며, Lee et al.(2001)의 연구를 참고하여 제체에 대한 다짐의 영향을 고려한 후 두 값들이 선형적인 비례 관계가 나타남을 확인하였다. 최종적으로 이러한 관계를 모두 고려한 잠수월류 시 보 하류부 세굴길이에 대한 예측식을 제안하였다. 본 예측식은 하천 계획 및 설계시 호안의 범위를 산정하는데 참고자료로 유용할 것으로 판단된다. 향후에는 완전월류(perfect overflow)에서 보 연결부 세굴에 대한 연구를 수행하여, 월류 형태 별 제방 세굴길이에 대한 연구를 완성하고자 한다.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.65-73
• /
• 2023

Fishways are essential structures that must be installed in rivers to facilitate the movement of fish between upstream and downstream areas. However, the efficiency of fish passage varies depending on the flow conditions within the fishway. Therefore, this study examined the fish-friendly flow characteristics within a stepped fishway at different overflow depths using FLOW-3D, and conducted experiments for model validation. The key parameters affecting fish swimming ability include velocity, turbulent kinetic energy, and energy dissipation rate. These factors were assessed using a simulated fish species, the zacco platypus, to evaluate the suitability of fish-friendly flow condition. It was confirmed that overflow depth significantly influences fish behavior, and an appropriate overflow depth is required for stepped fishway design. The results of this study are expected to serve as fundamental data for the design of stepped fishways in the future.

• Journal of Microbiology
• /
• v.40 no.1
• /
• pp.82-85
• /
• 2002

The aerobic batch growth of Issatchenkia orientalis DY252 with glucose and fructose medium was investigated at 32$\^{C}$ and pH 5.0. Aerobic ethanol production was evident with yeast I, orientalis. A diauxic lag of about 1 h between growth on glucose and growth on ethanol during batch culture was observed. However, no diauxic growth occurred with fructose. As the incubation temperature was increased from 32 to 39$\^{C}$, viability at the end of each batch culture declined significantly, from 93 to 43%, Unlike the effect of temperature, viability was not greatly affected by incubation pH, and cell yield values in a range of 0.45-0.48 were obtained. In order to overcome overflow metabolism, a fedbatch culture under glucose limitation was carried out. Compared with aerobic batch culture, about 10% improvement in cell yield was achieved with a fed-batch culture in optimal conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.117-128
• /
• 2005

Korea is affected by typhoon 2-3 times a year, and 50${\sim}$60 % of annual rainfall is concentrated during summer with heavy daily precipitation. Recently such natural conditions cause many of failures or damages of reservoirs and embankments. Overflow by heavy flood is the main cause that results 54.2 % of total embankment failures with damages of spillway, outlet channel and stilling basin. Since damages by overflow are triggered by scour of soils nearby the structures, use of proper backfill materials with great resistance against erosion should be considered and application of suitable construction method to protect erosion may be adopted. Most failures of levee are caused by piping along the surface of cross-structure underneath levee. Such failures may be protected by deep consideration of piping at the stage of design and good quality control during construction. Sufficient magnitude of spillway and outlet channel is the ideal way to prevent failures by the flood. For existing structures, remodeling with reinforcement to protect against flood with review of required storage of dam should be considered.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.67-75
• /
• 1999

The sensing and communication abilities of a mobile robot are essential to cooperative behavior in distributed autonomous robotic systems. In general, as the number of robot goes on increasing, the limitation of communication capacity and information overflow occur in global communication capacity and information overflow occur in global communication system. Therefore a local communication is more effective than global one. In this paper, we analyze information propagation mechanism based on local communication. To find an optimal communication radius, we propose three methods with different conditions. Also, to avoid chaotic behavior which occurs when a robot obtains and loses information, we find stable condition of information propagation.