• 제목/요약/키워드: overestimation of peak flow

검색결과 6건 처리시간 0.022초

공업용수 정수장 설계시 첨두부하 적용방안 (Application of peak load for industrial water treatment plant design)

  • 김진근;이희남;김두일;구자용;현인환
    • 상하수도학회지
    • /
    • 제30권3호
    • /
    • pp.225-231
    • /
    • 2016
  • Peak load rate(i.e., maximum daily flow/average daily flow) has not been considered for industrial water demand planning in Korea to date, while area unit method based on average daily flow has been applied to decide capacity of industrial water treatment plants(WTPs). Designers of industrial WTPs has assumed that peak load would not exist if operation rate of factories in industrial sites were close to 100%. However, peak load rates were calculated as 1.10~2.53 based on daily water flow from 2009 to 2014 for 9 industrial WTPs which have been operated more than 9 years(9-38 years). Furthermore, average operation rates of 9 industrial WTPs was less than 70% which means current area unit method has tendency to overestimate water demand. Therefore, it is not reasonable to consider peak load for the calculation of water demand under current area unit method application to prevent overestimation. However, for the precise future industrial water demand calculation more precise data gathering for average daily flow and consideration of peak load rate are recommended.

공간적 포화면적의 공간적 연결을 고려한 TOPMODEL의 개선과 적용 (Modification of TOPMODEL Considering Spatial Connectivity of Saturated Area)

  • 김상현;김경현
    • 한국수자원학회논문집
    • /
    • 제32권5호
    • /
    • pp.515-524
    • /
    • 1999
  • 본 연구는 토양수분의 공간적 분포를 고려하는 과정에서 TOPMODEL이 가지고 있는 구조상의 문제를 해결하는 방안을 제시한다. 포화초과유출을 모의하는 기존 TOPMODEL은 유출모의시 유역내 포화부분의 공간적인 정보를 반영하는 과정에 있어 포화면적의 연결성을 고려한 유출 알고리즘의 개발로 발전되었다. 개발된 알고리즘은 TOPMODEL의 매개변수를 증기시키지 않고 개선된 유출경로 추적의 근거를 제시함으로써 모형의 합리성과 적용성을 제고시켰다. 본 연구에서 개발된 포화면적 연결모형과 기본적인 통계적 입력모형형태의 TOPMODEL을 국제수문개발계획 대상유역인 위천유역내의 동곡소유역에 적용한 결과 본 연구에서 개발된 포화면적 연결모형이 다른 두 모형에서 발생하는 모의시 과도첨두유량계산의 문제를 해결할 수 있었다.

  • PDF

강우 데이터를 쓰지 않는 홍수예측법에 관한 연구 (A Study on Flood Prediction without Rainfall Data)

  • 김치홍
    • 기술사
    • /
    • 제18권2호
    • /
    • pp.1-5
    • /
    • 1985
  • In the flood prediction research, it is pointed out that the difficulty of flood prediction is the frequently experienced overestimation of flood peak. That is caused by the rainfall prediction difficulty and the nonlinearity of hydrological phenomena. Even though the former reason will remain still unsolved, but the latter one can be possibly resolved the method of the AMRA (Auto Regressive Moving Average) model for each runoff component as developed by Dr. Hino and Dr. Hasebe. The principle of the method consists of separating though the numerical filters the total runoff time series into long-term, intermediate and short-term components, or ground water flow, interflow, and surface flow components. As a total system, a hydrological system is a non-linear one. However, once it is separated into two or three subsystems, each subsystem may be treated as a linear system. Also the rainfall components into each subsystem a estimated inversely from the runoff component which is separated from the observed flood. That is why flood prediction can be done without rainfall data. In the prediction of surface flow, the Kalman filter will be applicable but this paper shows only impulse function method.

  • PDF

평화의댐 장기 유출과 수질 모의를 위한 GSSHA 모형의 적용 (Application of the GSSHA model for the long-term simulation of discharge and water quality at the Peace dam)

  • 장석환;오경두;조준원
    • 한국수자원학회논문집
    • /
    • 제53권5호
    • /
    • pp.357-367
    • /
    • 2020
  • 미계측 유역의 수문순환이나 수질을 모의하는 것은 매우 어려운 것이 현실이며 특히 장기간에 걸쳐 모의를 해야 하는 경우에는 더욱 그러하다. 본 연구에서는 미계측 유역인 평화의댐 유역을 대상으로 물리적인 과정 기반의 분포형 수문 모형 GSSHA의 장기 유출과 수질 모의에 대한 적용성을 검토하였다. 분포형 유역 모형 GSSHA를 평화의댐 유역에 적용하여 유량과 수질 모의치를 실측치와 비교한 결과 소규모 호우로부터의 첨두유량을 과대하게 모의하거나 실측된 수질 자료와 일부 구간에서 다른 경향성을 보이는 등 일부 불일치하는 사항들이 나타났으나 모의된 주요 호우의 첨두유량과 기저유출의 전반적인 수문곡선 형태는 비교적 양호한 것으로 나타나 실무에서의 적용 가능성이 있는 것으로 판단하였다.

Aero-elastic wind tunnel test of a high lighting pole

  • Luo, Yaozhi;Wang, Yucheng;Xie, Jiming;Yang, Chao;Zheng, Yanfeng
    • Wind and Structures
    • /
    • 제25권1호
    • /
    • pp.1-24
    • /
    • 2017
  • This paper presents a 1:25 multi-freedom aero-elastic model for a high lighting pole at the Zhoushan stadium. To validate the similarity characteristics of the model, a free vibration test was performed before the formal test. Beat phenomenon was found and eliminated by synthesis of vibration in the X and Y directions, and the damping ratio of the model was identified by the free decay method. The dynamic characteristics of the model were examined and compared with the real structure; the similarity results were favorable. From the test results, the major along-wind dynamic response was the first vibration component. The along-wind wind vibration coefficient was calculated by the China code and Eurocode. When the peak factor equaled 3.5, the coefficient calculated by the China code was close to the experimental result while Eurocode had a slight overestimation of the coefficient. The wind vibration coefficient during typhoon flow was analyzed, and a magnification factor was suggested in typhoon-prone areas. By analyzing the power spectrum of the dynamic cross-wind base shear force, it was found that a second-order vortex-excited resonance existed. The cross-wind response in the test was smaller than Eurocode estimation. The aerodynamic damping ratio was calculated by random decrement technique and the results showed that aerodynamic damping ratios were mostly positive at the design wind speed, which means that the wind-induced galloping phenomenon is predicted not to occur at design wind speeds.

AnnAGNPS 모형을 이용한 관목림지의 비점오염 모의 (Non-point Source Pollution Modeling Using AnnAGNPS Model for a Bushland Catchment)

  • 최경숙
    • 한국농공학회논문집
    • /
    • 제47권4호
    • /
    • pp.65-74
    • /
    • 2005
  • AnnAGNPS model was applied to a catchment mainly occupied with bushland for modeling non-point source pollution. Since the single event model cannot handle events longer than 24 hours duration, the event-based calibration was carried out using the continuous mode. As event flows affect sediment and nutrient generation and transport, the calibration of the model was performed in three steps: Hydrologic, Sediment and Nutrient calibrations. The results from hydrologic calibration for the catchment indicate a good prediction of the model with average ARE(Absolute Relative Error) of $24.6\%$ fur the runoff volume and $12\%$ for the peak flow. For the sediment calibration, the average ARE was $198.8\%$ indicating acceptable model performance for the sediment prediction. The predicted TN(Total Nitrogen) and TP(Total Phosphorus) were also found to be acceptable as the average ARE for TN and TP were $175.5\%\;and\;126.5\%$, respectively. The AnnAGNPS model was therefore approved to be appropriate to model non-point source pollution in bushland catchments. In general, the model was likely to result in underestimation for the larger events and overestimation fur the smaller events for the water quality predictions. It was also observed that the large errors in the hydrologic prediction also produced high errors in sediment and nutrient prediction. This was probably due to error propagation in which the error in the hydrologic prediction influenced the generation of error in the water quality prediction. Accurate hydrologic calibration should be hence obtained for a reliable water quality prediction.