• 한국건축시공학회지
• /
• 제18권1호
• /
• pp.59-65
• /
• 2018

라돈가스는 암석이나 토양 등에 존재하는 자연 방사성 물질인 우라늄이 붕괴할 때 발생하는 무색, 무취, 무미의 가스이다. 인체가 연간 노출되는 방사선의 85%는 자연 방사선에 의한 것이고, 그 중 50%가 라돈가스이다. 미국 환경보호청(EPA)의 조사결과에 의하면, 라돈가스에 장시간 노출될 경우 흡연자는 1,000명 중 62명, 비흡연자는 1,000명 중 7명이 폐암 발병률에 노출된다. 이러한 라돈가스의 위해성을 저감하고자 활성탄소를 사용하여 경화체를 제작하여 그에 대한 공극 특성과 라돈가스 저감 특성에 대한 실험을 진행하였다. 활성탄소를 활용하였을 경우, 측정기간이 길어질수록 라돈가스 농도는 급격한 저감과 그래프 상의 변화를 확인할 수 있었다. 또한 활성탄소의 재료적 특성 중 하나인 공극 분포와 미세공 특성을 파악할 수 있다.

• Nano
• /
• 제13권10호
• /
• pp.1850115.1-1850115.10
• /
• 2018

A novel sensor material of Au nanoparticles (NPs) functionalized 1D ${\alpha}-MoO_3$ nanobelts (NBs) was fabricated by a facile lysine-assisted approach. The obtained $Au/{\alpha}-MoO_3$ product was characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive X-ray (EDX), and X-ray photoelectron spectra (XPS). Then, in order to investigate the gas sensing performances of our samples, a comparative gas sensing study was carried out on both the ${\alpha}-MoO_3$ NBs before and after Au NPs decoration by using ethanol vapor as the molecular probe. The results turned out that, after the functionalization of Au NPs, the sensor exhibited improved gas-sensing characteristics than the pure ${\alpha}-MoO_3$, such as response and recovery time, optimal operating temperature (OT) and excellent selectivity. Take for example 200 ppm of ethanol, the response/recovery times were 34 s/43 s and 5.7 s/10.5 s, respectively, while the optimal operating temperature (OT) was lower to $200^{\circ}C$ rather than $250^{\circ}C$. Besides, the functionalized sensor showed a higher response to ethanol at $200^{\circ}C$, and response was 1.6 times higher than the pure $MoO_3$. The mechanism of such improved sensing properties was interpreted, which might be attributed to the spillover effect of Au NPs and the electronic metal-support interaction.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.917-924
• /
• 2012

The conformational study of glycerol has been carried out using the M06-2X/cc-pVTZ level of theory in the gas phase and the SMD M06-2X/cc-pVTZ level of theory in water in order to understand its conformational preferences and solvation effects. Most of the preferred conformers of glycerol have two $C_5$ hydrogen bonds in the gas phase, as found by the analysis of calorimetric data. It has been known that the solvation drove the hydrogen bonds of glycerol to be weaker and its potential surface to be fatter and that glycerol exists as an ensemble of many feasible local minima in water. The calculated populations of glycerol in the gas phase and in water are consistent with the observed values, which are better than the previously calculated ones at the G2(MP2), CBS-QB3, and SM5.42 HF/6-31G(d) levels of theory.

• 한국분무공학회지
• /
• 제20권2호
• /
• pp.101-106
• /
• 2015

Gas leakage and dispersion in the underground LNG power plant can lead to serious fire and explosion accident. In this study, computational fluid dynamics simulation was applied to model the dynamic process of gas leakage and dispersion phenomena in a closed space. To analyze the risk assessment factor, such as the flammable volume ratio, transient simulations were carried out for different scenarios. The simulation results visualized the gas distribution with time in the closed space. The flammable volume ratio was introduced for quantitative analysis the fire/explosion probability.

• 산업기술연구
• /
• 제22권A호
• /
• pp.9-17
• /
• 2002

This analysis is aimed to find out how the conditions of secondary air injection affects the residence time and the turbulence energy of flue gas and flow field in a small incinerator. A commercial code, PHOENICS, is used to simulate the flow field of an Incinerator. The computational grid system is constructed in a cartesian coordinate system In this numerical experiment, an independent numerical variable is the conditions of secondary air injection and dependants are the residence time of flue gas and the mean value of turbulence energy in a primary combustion chamber. The flow field and the distribution of turbulence energy are analysed to evaluate the residence time of flue gas and the turbulence energy The computational results say that the tangential injection of secondary air make the residence time much longer than the radial injection and that the radial injection of secondary make turbulence much stronger than the tangential injection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.305-310
• /
• 2001

This paper presents the computational method for analyzing the compressible flow fields in a high voltage gas circuit breaker. There are many difficult problems in analyzing the gas flow in GCB due to complex geometry, moving boundary, shock wave and so on. In particular, the distortion problem of the grid due to the movement of moving parts can be worked out by the fixed grid technique. Numerical simulations are based on a fully implicit finite volume method of the compressible Reynolds-averaged Navier-Stokes equations to obtain the pressure, density, and velocity through the entire interruption process. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.92-99
• /
• 2008

The "energy separation phenomenon" through a vortex tube has been a long-standing mechanical engineering problem whose operational principle is not yet known. In order to find the operational principle of the vortex tube, CFD analysis of the flow field in the vortex tube has been carried out. It was found that the energy separation mechanism in the vortex tube consists of basically two major thermodynamic-fluid mechanical processes. One is the isentropic expansion process at the inlet nozzle, during which the gas temperature is nearly isentropically cooled. Second process is the viscous dissipation heating due to the high level of turbulence in both flow passages toward cold gas exit as well as the hot gas exit of the vortex tube. Since the amount of such a viscous heating is different between the two passages, the gas temperature at the cold exit is much lower than that at the hot exit.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.40-44
• /
• 2005

A great deal of exhaust gas inside a combustion room goes out through exhaust pipe but residual gas, is called "Blowby gas", enters the crankcase through a small gap between the piston and the cylinder wall. Here, if the crankcase isn't vented, this causes many bad effects such as lubricant oil contamination, corrosion by that and crankcase explosion by rising pressure. So, most automobiles are constituted with a PCV (Positive Crankcase Ventilation) system to prevent previous problems. PCV valve is the most important part in this ventilation system. When companies are manufacturing new engines, engineers are designing it depending on their experiments than theoretical knowledge. Mush efforts and times are needed for new development. This study will show quantitative results to increase the possibilities of reduction of developing time.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.216-221
• /
• 2001

In this study, the effects of nitriding methods and times on the fatigue strength of SACM 645 steel were investigated. The rotary bending tests were carried out to obtain and compare the fatigue strengths of plasma ion nitrided specimens and gas nitride specimen. The 70 hr. gas nitrided specimen had the highest fatigue strength of 1.05$\times$$10^3$ MPa over the 40 hr., 70 hr. and 90 hr. plasma ion nitrided specimens, which had the fatigue strength of 3.48$\times$$10^2$, 4.57$\times$$10^2$ and 4.64$\times$$10^2$ respectively. Also, the microhardness tests were conducted to measure the effective case depths. The plasma ion nitrided specimens showed much higher surface hardness values than the gas nitrided specimen overall.

• 한국레이저가공학회지
• /
• 제6권1호
• /
• pp.25-31
• /
• 2003

5052 aluminum alloy sheets of 2mm thickness were butt welded using a continuous wave Nd:YAG laser with and without Ar shielding gas. Vickers hardness, transverse-weld tensile and bulge tests were carried out to investigate the effect of Ar shielding gas on the mechanical properties and formability of laser welds. Porosity in the weld metals was investigated using an optical microscope. Mechanical properties and formability of 5052 aluminum alloy laser welds were degraded compared to those of base metal. However, those properties were improved due to the reduced size and number of porosity when Ar shielding gas was used.