References
- Ranque, M. G., 1933, 'Experiences Sur La Detente Giratoire Avec Production Simulanees D'un Echappement D'air chaud Et D'un Echappement d'air Froid,' J Phys Radium, Vol. 7, No. 4, pp. 112~114 https://doi.org/10.1051/jphysrad:0194600704011200
- Hilsch, R., 1947, 'The Use of the Expansion of Gases in a Centrifugal Field as Cooling Process,' Rev Sci Instrum, Vol 18, No. 2, pp. 108~113 https://doi.org/10.1063/1.1740893
- Hartnett, J. P. and Eckert, E. R. G., 1957, 'Experimental Study of the Velocity and Temperature Distribution in a High-velocity Vortex-type Flow,' Trans ASME, Vol. 79, No. 4, pp. 751~758
- Lay, J. E., 1959, 'An Experimental and Analytical Study of Vortex Flow Temperature Separation by Superposition of Spiral and Axial Flows,' Trans. ASME J. Heat Transfer, Vol. 81, pp. 202~212
- Bruun, H. H., 1969, 'Experimental Investigation of the Energy Separation in Vortex Tubes,' J. Mechanical Engineering Science, Vol. 11, No. 6, pp. 567~582 https://doi.org/10.1243/JMES_JOUR_1969_011_070_02
- Takahama, H., 1965, 'Studies on Vortex Tubes,' Bull. JSME, Vol. 8, No.31, pp. 433~440 https://doi.org/10.1299/jsme1958.8.433
- Reynolds, A. J., 1964, 'A Note on Vortex-Tube Flows,' J. Fluid Mech., Vol. 14, No. 2, pp. 18~20 https://doi.org/10.1017/S0022112062001032
- Ahlborn, B. and Groves, S., 1997, 'Secondary Flow in a Vortex Tube,' Fluid Dynamics Research, Vol 21, pp. 73~86 https://doi.org/10.1016/S0169-5983(97)00003-8
- Fulton, C. D., 1950, 'Ranque's Tube,' J. ASRE Refrigerating Engineering, Vol. 58, No. 5, pp. 473~479
- Stephan, K., Lin, S., Durst, M., Huang, F. and Seher, D. 1983, 'An Investigation of Energy Separation in a Vortex Tube,' Int J Heat Mass Transfer, Vol. 26, No. 3, pp. 341~348 https://doi.org/10.1016/0017-9310(83)90038-8
- Kurosaka, M. 1982, 'Acoustic Streaming in Swirling Flow and the Ranque-Hilsch (Vortex-Tube) Effect,' J. Fluid Mech., Vol. 124, pp. 139~172 https://doi.org/10.1017/S0022112082002444
- Deissler, R. and Perlmutter, G. M., 1960, 'Analysis of the Flow and Energy Separation in a Turbulent Vortex,' Int. J. Heat Mass Transfer, Vol. 1, pp.173~191 https://doi.org/10.1016/0017-9310(60)90021-1
- Frohlingsdorf, W. and Unger, H., 1999, 'Numerical Investigations of the Compressible Flow and the Energy Separation in the Ranque-Hilsch Vortex Tube,' Int. J. Heat Mass Transfer, Vol. 42, pp. 415~422 https://doi.org/10.1016/S0017-9310(98)00191-4
- Aljuwayhel, N. F., Nellis, G. F. and Klein, S. A., 2005, 'Parametric and Internal Study of the Vortex Tube using a CFD Model,' Int. J Refrigeration, Vol. 28, pp. 442~450 https://doi.org/10.1016/j.ijrefrig.2004.04.004
- Skye, H. M., Nellis, G. F. and Klein, S. A. 2006, 'Comparison of CFD Analysis to Empirical Data in a Commercial Vortex Tube,' Int. J Refrigeration, Vol. 29, pp. 71~80 https://doi.org/10.1016/j.ijrefrig.2005.05.004
- Upendra Behera, Paul, P. J., Kasthurirengan, S., Karunanithi, R., Ram, S. N., Dinesh, K. and Jacob, S. 2005, 'CFD Analysis and Experimental Investigation Towards Optimizing the Parameters of Ranque-Hilsch Vortex Tube,' Int. J. Heat Mass Transfer, Vol. 48, pp. 1961~1973 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.046
- Ahlborn, B., Keller, J. U., Staudt, R., Treitz, G. and Rebhan, E. 1994, 'Limits of Temperature Separation in a Vortex tube,' J. Phys., Vol. 27, pp. 480~488 https://doi.org/10.1088/0022-3727/27/3/009