• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.177-184
• /
• 2004

Orthotropic steel deck bridge has much advantages such as the light deadweight, so the construction of orthotropic steel deck is profitable for the long-span bridges Although the system has a lot of merits, it happens some damages by the traffic density and the fatigue cracks of welding. The cross-connection of longitudinal rib and transversal rib is one of the weakest at the fatigue. The secondary stresses which are from the out-plane deformation of transversal rib and the torsion of longitudinal rib make the topical stress concentration phenomenon. The Bulkhead Plate for prevention of this stress concentration phenomenon was applied by changing the orthotropic steel deck of Williamsburg bridge in USA. But, it is principle that a Bulkhead Plate is not established in the domestic design standard. Therefore, it is estimated that the study for installation of Bulkhead Plate is needed. This study with considering these circumstances proves efficiency of Bulkhead Plate and will be presented optimal design details through finite element analysis according to change the geometrical of Bulkhead Plate and the cross-connection area of longitudinal and transversal rib

• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.363-372
• /
• 1999

본 연구는 강상판교의 자동화설계에 적합한 합리적인 해석모델을 제시하였다. 최적의 해석모델을 선정하기 위해 격자모델에 기초한 다양한 해석모델을 제시하며, 제안된 해석모델들을 해석의 신뢰성, 해석시간 및 효용성 등에 대해 비교하였다. 또한 현재 강상판교의 설계에 많이 사용되는 Pelikan-Esslinger 방법과 제시한 해석모델과의 성능을 비교하였다. 선정된 해석모델의 효용성을 입증하기 위하여 수치예제로서 지간장이 200m(60m+80m+60m)인 3경간 연속 강상판 박스거더교를 적용하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.385-392
• /
• 2001

The stiffness of pavement is scarcely considered in structural analysis of the superstructure bridge. It will be reasonable in the case of asphalt concrete pavement over concrete deck plate because stiffness of the pavement compared with concrete deck plate can be ignored. Additionally, it is considered correct to do a design with a safety. However, various pavement materials which have even value reaching to the elastic modulus of concrete are applied to the orthotropic steel deck plate which has a relatively less stiffness comparing with the concrete deck plate. In this paper, the steel plate deck of the bridge of real project was modeled considering the pavement stiffness for the FEM analysis and the linear elastic analysis was performed. It was assumed to be perfectly bonded between the steel plate deck and the pavement and the temperature effect was ignored. It was analyzed on the vertical deflection of steel deck plate influencing to the serviceability of pavement and the bending stress of steel deck plate related to the fatigue life. As a result, It was indicated that the structural behavior of the orthotropic steel deck plate could be affected by the stiffness of pavement in some cases.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1084-1089
• /
• 2004

Recently, Orthotropic steel deck bridges, which have long span decks, have been regarded as one of economical as well as durable bridge types. However, Orthotropic steel deck bridge is used by a lot of welding, which may cause welding defect and deformation of connections. This kind of system happens some damages by the fatigue cracks of welding. The cross-connection of longitudinal rib and transversal rib is one of the weakest point because of the fatigue. The secondary stresses which are from the out-plane deformation of transversal rib and the torsion of longitudinal rib make the topical stress concentration phenomenon. But, it is principle that a Bulkhead Plate is not established in the domestic design standard. Therefore, it is estimated that a study for the installing of Bulkhead Plate is needed. This study with considering these circumstances proves efficiency of Bulkhead Plate and will be presented optimal design details through finite element analysis according to change the geometrical system of Bulkhead Plate and the cross-connection area of longitudinal and transversal rib

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.262-271
• /
• 1998

Recent, more and more steel deck bridges are adopted for the design of long span bridges and the upgrading of existing concrete deck bridges, mainly because of reduced self weight, higher stiffness and efficient erection compared to concrete decks. The main objective of this study is to propose on formulation of the design optimizations to develop an optimal desist program required for optimum desist for orthotropic steel-deck bridges. The objective function of the optimization is formulated as a minimum initial cost design problem. The behavior and design constraints are formulated based on the ASD and LRFD criteria of the Korean Bridge Design Code(1996). The optimum design program developed in this study consists of two steps. In the first step the system optimization of the steel box girder bridges is carried out. And in the second step the program provided the optimum design of the orthotropic steel-deck with close ribs. In the optimal design program the analysis module for the deck optimization is based on the Pelican Esslinger method. The optimizer module of the program utilizes the ADS(Automated Desist Synthesis) routines using the optimization techniques fuor constrained optimization. From the results of real application examples, The cost effectiveness of optimum orthotropic steel-deck bridges designs based on both ASD and LRFD methods is investigated by comparing the results with those of conventional designs, and it may be concluded that the design developed in this study seems efficient and robust for the optimization of orthotropic steel-deck bridges

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.749-756
• /
• 2006

Because of the orthotropic elastic properties and significant two-way bending action, orthotropic plate theory may be suitable for describing the behavior of concrete filled grid bridge decks. Current AASHTO LRFD Bridge Design Specification(2004) has live load moment equations considering flexural rigidity ratio between longitudinal and transverse direction, but the Korea highway bridge design specification(2005) doesn't. The Korea highway bridge standard specification LRFD(1996) considers an orthotropic plate model with a single load to estimate live load moments in concrete filled grid bridge decks, which may not be conservative. This paper presents live load moment equations for truck and passenger car, based on orthotropic plate theory. The equations of truck model use multiple presence factor, impact factor, design truck and design tandem of the Korea highway bridge standard specification LRFD(1996). The estimated moments are verified through finite-element analyses.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.1-9
• /
• 2013

PURPOSES: The purpose of this study is to evaluate physical properties, durability, fatigue resistance, and long-term performance of poly-urethane concrete (PU) which can be possible application of thin layer on long-span orthotropic steel bridge and to check structural stability of bridge structure. METHODS : Various tests of physical properties, such as flexural strength, tensile strength, bond strength and coefficient of thermal expansion tests were conducted for physical property evaluation using two types of poly urethane concrete which have different curing time. Freezing and thawing test, accelerated weathering test and chloride ion penetration test were performed to evaluate the effect of exposed to marine environment. Beam fatigue test and small scale accelerated pavement test were performed to assess the resistance of PU against fatigue damage and long-term performance. Structural analysis were conducted to figure out structural stability of bridge structure and thin bridge deck pavement system. RESULTS: The property tests results showed that similar results were observed overall however the flexural strength of PUa was higher than those of PUb. It was also found that PU materials showed durability at marine environment. Beam fatigue test results showed that the resistances of the PUa against fatigue damage were two times higher than those of the PUb. It was found form small scale accelerated pavement test to evaluate long-term performance that there is no distress observed after 800,000 load applications. Structural analysis to figure out structural stability of bridge structure and thin bridge deck pavement system indicated that bridge structures were needed to increase thickness of steel deck plate or to improve longitudinal rib shape. CONCLUSIONS: It has been known that the use of PU can be positively considered to thin layer on long-span orthotropic steel bridge in terms of properties considered marine environment, resistance of fatigue damage and long-term performance.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.101-108
• /
• 2012

강바닥판 교량은 비교적 얇은 강판이 사용되며, 가로 세로리브 및 가로보 등의 구조부재가 용접에 의해 복잡한 형상으로 조립되므로 용접에 의한 변형과 결함이 발생할 가능성이 매우 높고, 용접연결부에서의 응력 상태가 매우 복잡하다. 또한 실제 강바닥판 교량에서의 피로균열은 주부재보다 2차부재와의 용접연결부에서 발생되고 있다. 그러나 강바닥판교량 설계시에는 대부분 주부재에 대한 응력 평가가 이루어지고 있으며, 피로균열이 발생하는 구조상세에 대한 상세 응력 평가 및 특성 분석은 거의 검토되고 있지 있다. 본 연구에서는 공용년수 29년된 개단면 세로리브를 가진 강바닥판을 대상으로 피로균열의 원인을 조사하고, 재하시험 및 실교통류 흐름하에서의 현장계측을 통하여 대상 교량의 피로안전성을 검토하였다. 또한 피로균열이 발생된 세로리브 및 다이아프램의 용접부를 대상으로 격자해석 및 상세해석 모델을 사용하여, 이들 구조상세에 대한 영향면해석을 이용하여 이동하중에 따른 거동 특성을 조사하고, 대상교량의 피로균열 발생 원인을 규명하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권2호
• /
• pp.98-106
• /
• 2011

강박스거더의 바닥틀은 바닥강판, 종방향 리브 및 횡방향 리브로 구성된다. 강바닥판 교량은 용접 접합부의 개소가 많고 중차량 접지하중과 반복응력의 증가에 의해 피로손상의 발생 가능성이 매우 높다. 일반적으로 강바닥판의 피로균열은 중차량 트럭하중의 반복적인 재하하중으로 인한 국부응력에 의하여 발생한다. 또한 중차량 통행량의 증가 및 통행차량의 대형화는 피로균열 발생 가능성을 촉진한다. 따라서 교량에 영향을 미치는 실제 통행 차량하중의 하중재하 패턴을 고려한 하중 접지면적에 따른 교량의 거동을 정확히 평가하는 것은 매우 중요하다. 본 연구는 강바닥판 교량에서 통행 차량의 접지면적과 하중재하 효과를 고려하여 설계하중에 의한 접지면적과 실제 통행 차량의 접지면적을 유한요소해석을 통하여 비교 평가하였다. 유한요소해석은 강바닥판 교량의 4가지 하중 재하패턴에 대하여 수행하였다, 또한 해석은 다이아프램의 설치 유무에 따른 통행트럭의 접지면적 영향을 비교 평가하였다. 유한요소해석 결과, 실제 싱글타이어의 하중재하면적이 설계하중의 접지면적보다 보다 큰 국부응력을 보였고, 바닥강판은 전륜하중인 싱글타이어 재하에 의해 가장 큰 영향을 받는 것으로 나타났다. 또한 다이아프램의 설치 유무는 탄성영역에서 다이아프램 설치가 강바닥판 가로리브와 세로리브 교차부의 피로저항에 대한 구조성능 개선에는 효과가 없는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.319-329
• /
• 2018

The field around additional cutout of the floor beam web in orthotropic bridge deck was subjected to high stress concentration, especially the weld toe between floor beam and U shaped rib and the free edge of the additional cutout. Based on different considerations, different geometrical parameters of additional cutout were proposed in European, American and Japanese specifications, and there remained remarkable differences among them. In this study, considering influence of out-of-plane deformation of floor beam web and U shaped rib, parameter analysis for additional cutout under typical load cases was performed by fine finite element method. The influence of additional cutout shape and height to the stress distribution around the additional cutout were investigated and analyzed. Meanwhile, the static and fatigue test on this structure details was carried out. The stress distribution was consistent with the finite element analysis results. The fatigue property for additional cutout height of 95mm was slightly better than that of 61.5 mm.