• Journal of Communications and Networks
• /
• 제9권1호
• /
• pp.75-83
• /
• 2007

Orthogonal frequency division multiplexing (OFDM) systems with multiple transmit antennas can exploit space-time block coding on each subchannel for reliable data transmission. Spacetime coded OFDM systems, however, are very sensitive to time variant channels because the channels need to be static over multiple OFDM symbol periods. In this paper, we propose to mitigate the channel variations in the frequency domain using a linear filter in the frequency domain that exploits the sparse structure of the system matrix in the frequency domain. Our approach has reduced complexity compared with alternative approaches based on time domain block-linear filters. Simulation results demonstrate that our proposed frequency domain block-linear filter reduces computational complexity by more than a factor of ten at the cost of small performance degradation, compared with a time domain block-linear filter.

• 정보보호학회논문지
• /
• 제7권4호
• /
• pp.3-10
• /
• 1997

본 논문은 기존 비밀분산방식의 악세스 구조를 조합디자인 이론의 관점에서 해석함으로써 새로운 비밀분산방식이 구성될 수 있음을 보인다. 종래의 비밀분산방식으로서는 다항식보간을 이용하는 방법, 사영기하를 이용하는 방법등이 알려져 있으나 본 논문에서는 OA(orthogonal Arrary), t-(v,k l)디자인, 그룹분할 가능한 GD(Group Divisible)디자인이 갖는 행렬구조로부터 비밀분산방식의 악세스 구조를 정합시킴으로써 비밀분산방식을 새롭게 구성하고 있다. 이와같이 구성된 비밀분산방식은 기존 방식의 비밀 사이즈가 소수의 멱승 q에 의존하고 있는 반면 본 방식의 경우 조합디자인 파라메터에 관계하고 있으므로 비밀 사이즈 선택의 융통성이 있고 잘 알려진 조합적 구조를 이용함으로써 실현이 용이한 특징을 갖는다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.583-599
• /
• 2015

We apply the Bayesian matching pursuit (BMP) algorithm to the estimation of time-frequency selective channels in orthogonal frequency division multiplexing (OFDM) systems. By exploiting prior statistics and sparse characteristics of propagation channels, the Bayesian method provides a more accurate and efficient detection of the channel status information (CSI) than do conventional sparse channel estimation methods that are based on compressive sensing (CS) technologies. Using a reasonable approximation of the system model and a skillfully designed pilot arrangement, the proposed estimation scheme is able to address the Doppler-induced inter-carrier interference (ICI) with a relatively low complexity. Moreover, to further reduce the computational cost of the channel estimation, we make some modifications to the BMP algorithm. The modified algorithm can make good use of the group-sparse structure of doubly selective channels and thus reconstruct the CSI more efficiently than does the original BMP algorithm, which treats the sparse signals in the conventional manner and ignores the specific structure of their sparsity patterns. Numerical results demonstrate that the proposed Bayesian estimation has a good performance over rapidly time-varying channels.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.105-110
• /
• 2022

Al₂O₃ positively charged nanofiltration composite membrane was successfully prepared with aluminate coupling agent (ACA) as modifier, sodium bisulfite (NaHSO₃) and potassium persulfate (K₂S₂O₈) as initiator and methacryloyloxyethyl trimethylammonium chloride (DMC) as crosslinking monomer. The surface of the membrane before grafting and after polymerization were characterized by SEM and FT-IR. Three factor and three-level orthogonal experiments were designed to explore the optimal conditions for membrane preparation, and the optimal group was successfully prepared. The filtration experiments of different salt solutions were carried out, and the retention molecular weight was determined by polyethylene glycol (PEG). The results showed that the polymerization temperature had the greatest effect on the rejection rate, followed by the reaction time, and the concentration of DMC had the least effect on the rejection rate. The rejection rates of CaCl₂, MgSO₄, NaCl and Na₂SO₄ in the optimal group were 83.8%, 81.3%, 28.1% and 23.6% (average value), respectively. The molecule weight cut-off of 90% (MWCO) of the optimal group was about 460, which belongs to nanofiltration membrane.

• Wind and Structures
• /
• 제38권5호
• /
• pp.381-398
• /
• 2024

This study presents a mode analysis of 3D turbulent velocity data around a square-section building model to identify the dynamic system for Kármán-type vortex shedding. Proper orthogonal decomposition (POD) was first performed to extract the significant 3D modes. Magnitude-squared coherence was then applied to detect the phase consistency between the modes, which were roughly divided into three groups. Group 1 (modes 1-4) depicted the main vortex shedding on the wake of the building, with mode 2 being controlled by the inflow fluctuation. Group 2 exhibited complex wake vortexes and single-sided vortex phenomena, while Group 3 exhibited more complicated phenomena, including flow separation. Subsequently, a third-order polynomial regression model was used to fit the dynamics system of modes 1, 3, and 4, which revealed average trend of the state trajectory. The two limit cycles of the regression model depicted the two rotation directions of Kármán-type vortex. Furthermore, two characteristic periods were identified from the trajectory generated by the regression model, which indicates fast and slow motions of the wake vortex. This study provides valuable insights into 3D mode morphology and dynamics of Kármán-type vortex shedding that helps to improve design and efficiency of structures in turbulent flow.

• 대한수학회보
• /
• 제50권4호
• /
• pp.1329-1343
• /
• 2013

In this paper, we define translation surfaces in the 3-dimensional Heisenberg group $\mathcal{H}_3$ obtained as a product of two planar curves lying in planes, which are not orthogonal, and study minimal translation surfaces in $\mathcal{H}_3$.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.965-975
• /
• 2005

본 논문에서는 향후 초고속 W-PAN(Wireless Personal Area Network)을 위한 유력한 전송 기술로서 각광받고 있는 MB-OFDM UWB(Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) 시스템의 동기화를 위한 효과적인 반송파 및 샘플링 주파수 오프셋 결합 추정 기법을 제시하고 성능을 평가하였다. 이를 위해 PLCP(Physical Layer Convergence Procedure) 프리앰블 내의 채널 추정 시퀀스를 이용하고 MB-OFDM UWB 시스템 기술 규격 및 주파수 운용 방식을 고려하였으며, 반송파와 샘플링 주파수 오프셋을 결합 추정하는 방법으로서 먼저 샘플링 주파수 오프셋을 추정하고 추정된 샘플링 주파수 오프셋을 이용하여 반송파 주파수 오프셋을 추정하는 방식을 적용하였다. 또한 추정된 오프셋 값들의 신뢰도 향상을 위해 각 과정에서 가중치 기반의 주파수 오프셋 추정 기법을 사용하였다. IEEE 802.15 Task Group 3a에서 제공하는 4가지 UWB 실내 채널 모델을 이용한 모의실험 결과, 각 부채널에서의 수신 신호 평균 전력을 반영하는 제안된 간단한 형태의 가중치 기반 추정 기법의 성능이 채널의 주파수 응답을 사용하여 완벽한 채널 추정을 필요로 하는 이상적인 방법에 비해 훨씬 낮은 복잡도로 유사한 성능을 얻을 수 있음을 확인 하였다.

• 대한수학회논문집
• /
• 제9권2호
• /
• pp.415-418
• /
• 1994

Let G be a compact Lie group and let $S^1$ denote the unit circle in $R^2$ with the standard metric. Since every smooth compact Lie group action on $S^1$ is smoothly equivalent to a linear action (cf. [3J TH 2.0), we may think of $S^1$ with a smooth G-action as S(V) the unit circle of a real 2-dimensional orthogonal G-module V.(omitted)

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.45-50
• /
• 2011

Hot-Press-Forming (HPF), an advanced sheet metal forming method using stamping at a high temperature of about $900^{\circ}C$ and quenching in an internally cooled die set, is one of the most successful forming process in producing crash-resistant parts such as pillars and bumpers with complex shape, ultrahigh strength, and minimum springback. To optimize conditions of a forming quality in HPF process and secure a safe product without any failures, such as fractures and wrinkling, the simulations based on the coupled thermo-mechanical analysis for a hot-press-formed lower control arm are applied with Taguchi's orthogonal array experiment. Three factor variables - the friction coefficient, blank shape, and hole location for burring - are selected to be optimized. The most effective condition of a forming quality for a hot-press-formed lower control arm is suggested. The simulation results are confirmed with experimental ones.

• East Asian mathematical journal
• /
• 제22권2호
• /
• pp.249-257
• /
• 2006

Let n be a 2-step nilpotent Lie algebra which has an inner product <,> and has an orthogonal decomposition $n=\delta{\oplus}\varsigma$ for its center $\delta$ and the orthogonal complement $\varsigma\;of\;\delta$. Then Each element Z of $\delta$ defines a skew symmetric linear map $J_Z:\varsigma{\rightarrow}\varsigma$ given by $=$ for all $X,\;Y{\in}\varsigma$. Let $\gamma$ be a unit speed geodesic in a 2-step nilpotent Lie group H(2, 1) with its Lie algebra n(2, 1) and let its initial velocity ${\gamma}$(0) be given by ${\gamma}(0)=Z_0+X_0{\in}\delta{\oplus}\varsigma=n(2,\;1)$ with its center component $Z_0$ nonzero. Then we showed that $\gamma(0)$ is conjugate to $\gamma(\frac{2n{\pi}}{\theta})$, where n is a nonzero intger and $-{\theta}^2$ is a nonzero eigenvalue of $J^2_{Z_0}$, along $\gamma$ if and only if either $X_0$ is an eigenvector of $J^2_{Z_0}$ or $adX_0:\varsigma{\rightarrow}\delta$ is not surjective.