• The korean journal of orthodontics
• /
• v.53 no.4
• /
• pp.276-285
• /
• 2023

Objective: The aim of this retrospective study was to compare changes in hard tissue and soft tissue after the four first premolars were extracted with anterior teeth retraction according to the presence or absence of lip incompetence. Methods: Patients who underwent the four first premolars were extracted with anterior teeth retraction were divided into competent (n = 20) and incompetent lip (n = 20) groups. Cephalometric measurements for hard tissue and soft tissue changes were performed pre-treatment and post-treatment. Results: In the competent group, the upper and lower lips retreated by 2.88 mm and 4.28 mm, respectively, and in the incompetent group by 4.13 mm and 5.57 mm, respectively; the differences between the two groups were significant (p < 0.05). A strong positive correlation between retraction of the upper lip and upper incisors was observed in both groups (p < 0.05), whereas a correlation between retraction of the lower lip and lower incisors was only found in the incompetent group. A simple linear regression analysis showed that the pattern of lip retraction following the retraction of the anterior teeth was more predictable in the incompetent group than in the competent group. Conclusions: These findings suggest that the initial evaluation of lip incompetence in patients with skeletal Class II is essential for the accurate prediction of the soft tissue changes following retraction of the anterior teeth in premolar extraction treatment. Therefore, sufficient explanation should be provided during patient consultations.

• The korean journal of orthodontics
• /
• v.53 no.6
• /
• pp.358-364
• /
• 2023

Objective: This study aimed to three-dimensionally evaluate the pharyngeal airway space (PAS) of patients with anterior open bite (AOB) by using cone-beam computed tomography (CBCT) and compare the findings with those obtained in individuals with normal occlusion. Methods: The open bite group (OBG, n = 25) consisted of patients with an anterior overbite of -3 mm or less, while the control group (n = 25) consisted of age- and sex-matched individuals with an anterior overbite of 1-3 mm, Angle Class I malocclusion (1° ≤ point A-nasion-point B angle ≤ 4°), and a normodivergent profile (22° ≤ Frankfort mandibular plane angle ≤ 28°). After the CBCT data were reconstructed into a three-dimensional image, the PAS was segmented into four parts, and the volume of each part was measured. Pharyngeal airway length (PAL) and the area and transverse width of the part showing minimal constriction were also measured. Pearson's correlation analysis was used to evaluate the correlation between changes in the PAS and the amount of anterior overbite. Results: The OBG showed a significantly narrower airway space in the nasopharyngeal, hypopharyngeal, and total airway volumes. The OBG also showed a significantly smaller area and transverse width of the part with minimal constriction. The OBG showed a significantly longer PAL, but there was no correlation between the amount of anterior overbite and the changes in PAS. Conclusions: The PAS was associated with AOB. Patients with AOB had a narrower PAS and a smaller part showing minimal constriction.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.325-333
• /
• 2023

Purpose: The objective of this study was to evaluate and compare the accuracy and image quality of root surface area (RSA) measurements obtained with various cone-beam computed tomography (CBCT) protocols, relative to the gold standard of micro-computed tomography (CT), in an in vitro setting. Materials and Methods: Four dry human skulls were scanned using 8 different protocols, with voxel sizes of 0.15 mm, 0.3 mm, and 0.4 mm. Three-dimensional models of the selected teeth were constructed using CBCT and microCT protocols, and the RSA was automatically measured by the image-processing software. The absolute difference in the percentage of the RSA(%ΔRSA) was calculated and compared across the 8 CBCT protocols using repeatedmeasures analysis of variance. Finally, image quality scores of the RSA measurements were computed and reported in terms of percent distribution. Results: No significant differences were observed in the %ΔRSA across the 8 protocols (P>0.05). The deviation in %ΔRSA ranged from 1.51% to 4.30%, with an increase corresponding to voxel size. As the voxel size increased, the image quality deteriorated. This decline in quality was particularly noticeable at the apical level of the root, where the distribution of poorer scores was most concentrated. Conclusion: Relative to CBCT protocols with voxel sizes of 0.15mm and 0.3mm, the protocols with a voxel size of 0.4 mm demonstrated inferior image quality at the apical levels. In spite of this, no significant discrepancies were observed in RSA measurements across the different CBCT protocols.

• The korean journal of orthodontics
• /
• v.54 no.3
• /
• pp.160-170
• /
• 2024

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new direct-printing resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with direct-printed aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

• The Journal of the Korean dental association
• /
• v.15 no.6
• /
• pp.437-443
• /
• 1977

Author came to the following conclusion and made the following report as a result of corticotomy that treated in department of orthodontics and oral surgery, Tokyo Dental College. 1. In the respect of oral surgery, corticotomy is able to operate under local anesthesia. This operation is very simple and there is little clinical discomfort after operation. 2. In the respect of orthodontics, tooth movement is 2-3 times rapid than common orthodontic treatment in adult and clinical problem such as pain, root resorption are slight. Especially, tooth movement by differential force, rapid expansion in adult and unilateral expansion which was difficult, came to possible. 3. Corticotomy shorten the treatment time in preoperative orthodontic treatment of developmental abnormality of jaw, application to cleft lip & palate, orthodontic treatment before prosthetics. It's application is so wide that bring on much profits.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.321-333
• /
• 1987

The purpose of this study was to observe the changes of the lower 3rd molars following the extraction of the lower 2nd molars by Lateral Cephalograms and Orthopantomograms. The subjects consisted of twenty malocclusion, 7 males 13 females, were 19 year 5 month old at the removal of the lower 2nd molars, 19 year 1 month old at the end of the orthodontic supervision after the removal of the lower 2nd molars (mean age) The obtained results were as follows, 1 It is recommended to extract the lower 2nd molars when the lower 3rd molars are Nolla's Stage 4 or 5 2 With the pre-extraction variables obtained by factor analysis, it was possible to predict the long axis of the lower 3rd molars after 2nd molar extraction. 3 There were no impacted 3rd molars.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.223-248
• /
• 1987

The early tissue reactions in the periodontal tissues of the tension zones following the application of force (30gm) to the maxillary first molar teeth of the albino rats were studied by the light microscopy and electron microscopy The increase of periodontal fibroblasts was evident, particularly in 1 day survival period. Osteoblast differentiation and new bone formation on the alveolar bone surface were occurred from 1 day survival period. Mononuclear phagocytes occurred consistently and in relatively high number adjacent to and at some distance from blood vessel Extensive breakdown of collagen fibers was observed. The increase of the phagocytosis of collagen by the active fibroblasts was evident Also, collagen fibrils were sparse or lost near the macrophage.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.247-254
• /
• 1987

This study was undertaken to determine the adequate bracket slot torque degrees in Korean The subjects were consisted of plaster casts of 30 male and 30 female They had acceptable profile, normal occlusion, no loss of tooth and no experience of dental treatment Labiolingual or buccolingual inclinations of individual tooth were estimated as +, - degrees on the fixed model by use of dental surveyor, contact angle gauge and measuring grid The following conclusions were obtained 1 Adequate degrees of bracket slot torque in Korean were obtained 2 The degrees of labiolingual or buccolingual inclination of every tooth were very variable according to the individuals 3 Almost constant torque degrees were observed on the maxillary buccal segments 4 Progressive increase in minus torque degrees were observed from the mandibular canines to the 2nd molars.

• The Journal of the Korean dental association
• /
• v.52 no.9
• /
• pp.532-540
• /
• 2014

In contemporary orthodontic treatment skeletal temporary anchorage devices (TADs) are routinely used as an anchorage reinforcement to provide improved anchorage control with reduced requirement for patient's compliance. For past few decades, various types of TADs have been explored and their clinical application has been expanded. Therefore, the purpose of this article is to present three major types of orthodontic skeletal anchorage devices and discuss their rationale, clinical procedure, insertion site, and potential complications as well as their management.

• The korean journal of orthodontics
• /
• v.43 no.6
• /
• pp.302-310
• /
• 2013

Orthodontic closure of old, edentulous spaces in the mandibular posterior region is a major challenge. In this report, we describe a method of orthodontic closure of edentulous spaces in the mandibular posterior region accelerated by piezoelectric decortication and alveolar ridge expansion. Combined piezosurgical and orthodontic treatments were used to close 14- and 15-mm-wide spaces in the mandibular left and right posterior areas, respectively, of a female patient, aged 18 years and 9 months, diagnosed with skeletal Class III malocclusion, hypodontia, and polydiastemas. After the piezoelectric decortication, segmental and full-arch mechanics were applied in the orthodontic phase. Despite some extent of root resorption and anchorage loss, the edentulous spaces were closed, and adequate function and esthetics were regained without further restorative treatment. Alveolar ridge expansion-assisted orthodontic space closure seems to be an effective and relatively less-invasive treatment alternative for edentulous spaces in the mandibular posterior region.