• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.150-158
• /
• 2007

Objective: The aim of this study was to determine the relationship between the status of a unilateral palatally impacted maxillary canine (as seen on the panoramic radiograph) and the orthodontic treatment duration. Methods: A total of 36 subjects were chosen (8 males and 28 females, $13.7{\pm}2.5$ years). All patients had undergone orthodontic traction of the impacted canine after a closed flap surgery. The position of impacted canine on the panoramic radiograph was traced and calculated with regard to the treatment duration. Results: The canine overlap over the lateral incisor (COGr) had significant statistical difference between the short-term and the long-term treatment duration groups (divided by average treatment time of 21 months) (p<0.05). Multiple regression indicated that the variables of significance (with treatment duration as the dependent variable) were the canine vertical height from the occlusal plane $(HCV,\;r^2=0.115;\;p<0.05)$ and the mandibular anterior width $(MnDW,\;r^2=0.142;\;p<0.05)$. The treatment duration, the canine angle to the incisor midline (CA), and HCV decreased from primary dentition (under 12 yrs) to permanent dentition (15 yrs). Howerer, these increased again at the adolescent ages (over 16 yrs). Conclusion: These findings suggested that orthodontic treatment of a palatally impacted canine would show good prognosis at an age of early permanent dentition with the canine showing smaller CA and HCV.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.203-211
• /
• 2008

Minimizing damage to anatomical structure is a prerequisite for skeletal anchorage system to install a miniscrew. This research has focused on evaluating the stability and safety of installation in the maxillary molar buccal area, in which most miniscrews are installed clinically and initial fixation is weak. CT (computerized tomography)images were taken for surveying the possibility of damaging to adjucent teeth in accordance with installation angle. If we install a mini-screw($1.2{\times}6.0mm$) in the maxillary molar buccal area, it would be located generally in the 5~8mm upper of CEJ and 3~5mm inner of the cortical bone surface. We has measured the space between roots And comparison has been made for gender and the space between roots in accordance with the 3 different angles of installation(30 degree, 40 degree, 60 degree) in 3 categories. Category 1 : between 1st molar and 2nd molar Category 2 : between 1st molar and 2nd premolar Category 3 : between 1st premolar and 2nd premolar The result are as follow; 1. The space for category 1 was significantly small. 2. For the installation angle, it was safer to install with steeper angle in category 1 and category 2, but not in category 3. According to these results, the installation a miniscrew in category 2, 3 is safer than in category 1. And it is safer to install with steeper angle in category 1 and category 2.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.197-211
• /
• 2007

With the development of orthodontics and increasing concerns on physical appearance, the number of patients has been steadily increasing. It is quite important not only to make effective cure plans and accurate diagnoses but also to have a thorough grasp of patients' malocclusion types and their occurrence frequency, in addition to patients' personality in order to cure the patients appropriately. This study is based on 946 malocclusion patients who had visited Chong-A Dental Hospital from 1999 to 2004 and investigated their aspects of malocclusion and characteristics of their gender, age and residence. The results are as follows. 1. The number of patients per year had been decreased until 2001, after which year the number had fluctuated. The number was the largest in 1999, 169 and the smallest in 2001, 140. Female occupied 68.0% of the total, twice as many as male, 32.0%) 2. Based on the Angle's classification, 19 or over year - old group was the largest of the total, 59.3% and 6 or younger year - old group, the smallest, 0.5%. The 19 or over year old group was less than a half of the total (47.4%) in 2003 and there were no patients who belonged to the 6 or younger year - old group in 2003 and 2004. 3. Distributions on the types of malocclusion have shown that 39.9 % of the total are in the Class I, the largest, 31.0% in the Class I and 29.2 in the Class II, the smallest. 1) The number of the ClassI was 73, the largest, that of the Class III being 35, the smallest in 1999. On the whole, the number of the Class I accounted for the largest part of the total. 2) The number of male patients in the Class II was the smallest, generally being the largest in the Class I. In case of female, that of the Class III was the smallest. 3) Based on the age, the Class I was the highest in between 7 and 13 age group, the Class III the lowest. The Class I occupied the largest around 40%. 4) In the shape of physiognomy, the meso occupied the largest part among all the Class, of which the Class II was the highest, 64.2%. The bracy was the largest in the Class I, and the dolicho in the Class III. 5) In the profile, the convex shape was the largest in the Class I and II, and especially in the Class II, over 3/4 of the total, 75.4%. In contrast, the direct shape was the largest in the Class III and the sunken shape occupied 33.3%, which was nearly ten times more than the case of the Class I and III. 6) In the asymmetry of physiognomy, the number of patients of the Class IIIwas the largest, 34.1% and that of the Class II, the smallest, 19.5%. It was found that about one fourth of the malocclusion patients were under the asymmetry of physiognomy. 4. In the distribution of patients' residence, 81.4% were from the Seoul Metropolis and 48.2% from Gangnam-Gu where Chong-A Dental Hospital is located and Seocho-Gu and Songpa-Gu which are adjacent to Gangnam-Gu.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1255-1258
• /
• 2015

Background: Locally advanced head and neck cancer is generally incurable and has a short survival rate. This study aimed to evaluate symptom relief, disease response, and acute toxicity after palliative hypo-fractionated radiotherapy and long-term survival in affected patients. Materials and Methods: Between January 2011 to December 2011, 80 patients who were histopathologically diagnosed as having stage III or stage IV head and neck squamous cell carcinoma based on Eastern Cooperative Oncology Group (ECOG) performance status 1-3, were offered palliative radiotherapy (20 Gy/5Fr/5 Days). Later these patients were evaluated on 30th day after completion of treatment for disease response based on World Health Organisation (WHO) criteria and palliation of symptoms using symptomatic response grading and acute toxicities by the Radiation Therapy Oncology Group (RTOG). Many patients were given post radiation therapy (RT) palliative chemotherapy for appropriate palliative care and a few patients were selected for further curative RT. The overall survival was also evaluated among this group of patients with last follow up date of 1st May, 2014. Results: The most common presenting complaint was pain followed by dysphagia. Most patients (60-70%) had appreciable relief in their presenting symptoms. A good response was observed in the majority following palliative RT; a few patients had progressive disease and some had stable and regressed disease. None of the patients experienced radiation toxicity that required hospital admission. Almost all showed grade one and two acute skin and mucosal toxicity one month after completion of treatment. The mean survival days for patients given only hypofractionated palliative RT was 307 days, those with post palliative RT and palliative chemotherapy was 390 days and patients who went on to receive further palliative RT and curative RT dose had significantly overall survival of 582 days. Conclusions: Advanced head and neck cancer should be identified for suitable palliative hypofractionated radiotherapy to achieve acceptable symptom relief in a great proportion of patients and should be followed by palliative chemotherapy or curative RT in suitable cases for long-term symptom-free survival.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.591-599
• /
• 1996

This study was undertaken to investigate the cytotoxicity of orthodontic wires after doing various treatments to the wires. 018x025 inch Stainless steel(A) and Co-Cr(B) wires were used and each of them were divided into 4 groups. A-1 and B-1 groups were as received state, and A-2 and B-2 groups were heat treated. A-3 and B-3 groups were electropolished after heat treatment, and A-4 and B-4 groups were soldered with Ag-solder. Each group had 3 wires and these were sterilized with Ethylene Oxide gas. We used human gingival fibroblast cell culture and agar overlay technique to investigate the cytotoxicity of each group of wires. The cytotoxicity of wire was assessed using reaction index (zone index/lysis index). The findings of this study were as follows. 1. Both of the stainless steel wire and Co-Cr wire showed no cytotoxicity in as received state. 2. Heat treatment or electropolishing of the wires had no effect on the cytotoxicity of the wires 3. Soldered stainless steel wires showed a little wider zone of discoloration than soldered Co-Cr wires, but the zone index and cytotoxicity(reaction index) was not different. 4. Soldered wires showed moderate cytotoxicity in both of the wires.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.33-41
• /
• 1996

Retrostpective study of two groups of patients was conducted to evaluate the physiologic drift of the mandibular teeth following the extraction of four first premolars. The concept of physiologic drift, commonly referred to as 'driftodontics', following first premolar extractions has been gaining acceptance in the orthodontic community, the exact nature and amount of drift has not been adequately documented. There were also no guide lines as to when drift should be allowed to now. The purpose of this study was to quantify physiologic drift of the untreated mandibular dentition following extraction of the four first premolars during the early permanent and late permanent dentition stages. The early permanent dentition extraction sample(Group 1) included 26 Patients and the mean age at pretreatment was approximately 13.5 years. The observation period following extraction was approximately 6.96 months. The late permanent dentition extraction sample(Group 2) included 31 patients. The mean age at pretreatment was 21.3 years, followed by a observation period of 7.26 months. During the observation period, except for the extractions, no other mandibular therapy was rendered. Pre-and post-treatment lateral cephalograms and dental casts were analyzed. The obtained results were as follows 1. Group 2 showed marked changes in movements of the mandibular incisors and canines but minimal changes in molars. 2. The amount of changes in movements of the mandibular incisors and canines were significantly greater in Group 1 than in Group 2. The results showed no differences in rates of molar movements between groups. 3. Physiologic drift of the dentition produced desirable changes such as decreased Incisor Irregularity.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.893-904
• /
• 1998

There are varieties of severe malocclusions, which can be treated orthodontically, but with a great deal of effort. Anterior openbite, in particular, is one malocclusion thought to be more difficult to treat, and therefore, most of them have to be corrected by means of surgical intervention. To solve these problems, numerous studies pertinent to treatment modalities have been introduced with controversies on the effectiveness of treatment. Suggested treatment modalities for anterior openbite are based directly or indirectly on the neuromuscular and morphological features and on the etiologic and/or the environmental factors. Even though the vertical relationship of the face is increased due to the growth variation, the normal occlusal relationship can be achieved by the adequate dentoalveolar compensatory mechanism, but in the case of inadequate or negative dentoalveolar compensation, openbite is likely to be present. If the skeletal dysplasia is too severe to be solved by orthodontic treatment alone, combined treatment with surgery should be done to restore the function and the esthetics of the orofacial complex. In many cases, however, orthodontic alteration of the dentition pertinent to the given skeletal pattern with the proper diagnosis and treatment planning can bring satisfactory results. The treatment changes with the Multiloop Edgewise Archwire(MEAW) therapy occurred mainly in the dentoalveolar region and showed a considerable similarity to the natural dentoalveolar compensatory mechanism. In other words, the MEAW technique allows orthodontists to produce the natural dentoalveolar compensation orthodontically. Even if an openbite is corrected by the orthodontic dentoalveolar compensation suitable for the skeletal pattern, relapse may still occur by the persisting etiologic factors which originally prohibited the natural dentoalveolar compensation. The etiologic factors should be determined at the time of initial diagnosis and should be controlled during treatment and retention.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.669-675
• /
• 2000

Excessive production of parathyroid hormone causes bony disorder such as periosteal bone resorption and bone pain due to excessive skeletal demineralization. A Class III facial deformity case with generalized root resorption presented bete was fumed out to be due to hyperparathyroidism. Clinical and cephalometric analysis revealed a straight skeletal profile with a retruded maxilla and a prognathic mandible. The x-ray findings demonstrated generalized root resorption of entire dentition to different degree. There also appeared osteoporosis like immature trabecular structure with the evidence of ground glass appearance. Serum test showed elevated 1evel of parathyroid hormone and growth hormone. Change of cranial growth by hyperparathyroidism can be dependent up(In a decreased bone apposition in viscerocranial growth site and abnormalities in cranial suture growth. It is possible to hypothesize that growth retardation of maxilla at least partially be accounted lot hyperparathyroidism. Therefore, regarding to the definite etiology of skeletal Class III and orthodontic treatment planning considering root resorption and osteoporosis, the early diagnosis for the hyperparathyroidism should be carefully carried by clinical and laboratory studies.