• 무역상무연구
• /
• 제25권
• /
• pp.123-163
• /
• 2005

The strategic alignment between internet marketing's strategic orientation and EC system's strategic orientation is an important concept in Electronic Commerce. This study measured internet marketing's strategic orientation, EC system's strategic orientation, strategic alignment, and strategic EC performance based on previous studies. Analysis of data gathered in mail survey of korea firms in KOSPI and KOSDAQ. The findings suggest that companies with high strategic alignment are better performing EC strategically, and internet marketing and EC system's strategic orientation are positive related to strategic alignment and performance of EC. This study supports that the level of the EC executive's participation in internet marketing planning influences strategic alignment of the EC plan with the internet marketing plan. Further, high levels of that alignment are associated with increased use of EC for strategic performance.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.410-413
• /
• 2009

웨이퍼 Pre-Alignment는 반도체 공정에서 장비에 웨이퍼를 놓기 전에 웨이퍼의 중심 및 방향을 정확하게 정렬할 필요가 있는데, 이를 위해서 일정한 수준 이하로 중심과 방향을 찾아 Alignment 하는 방법을 말한다. 본 논문에서는 웨이퍼를 Alignment 하기 위해 기존의 Mechanical한 방법이 아닌 Area 카메라를 통한 비접촉식 방법을 이용하였다. 이 방법은 웨이퍼를 45도씩 8번씩, 한 바퀴를 회전하여 이미지를 획득한 뒤, 이미지의 웨이퍼의 에지값 들을 이용하여 Least Square Circle Fitting을 이용하여 웨이퍼의 중심과 방향을 정확하게 측정하여 Alignment를 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.195-198
• /
• 2001

We proposes a new fingerprint minutia matching algorithm which matches the fingerprint minutiae by using local alignment. In general, fingerprint is deformed by Pressure and orientation when a user presses his fingerprint to the sensor. These nonlinear deformations change the position and the orientation of minutiae which decrease reliability of minutiae. Matching by using global alignment uses one alignment point. But, the problem with this method is that, due to the deformation, matching reliability of a minutia decreases as the distance from the alignment minutia increases. Matching by using local alignment overcomes this problem by considering minutiae which are located in a short distance boundary. Experimental results show that the performance of the proposed algorithm is superior to that of using global alignment.

• 센서학회지
• /
• 제28권1호
• /
• pp.30-35
• /
• 2019

Inertial measurement units (IMUs) are widely used for wearable motion-capturing systems in the fields of biomechanics and robotics. When the IMUs are combined with optical motion sensors (hereafter, OPTs) for their complementary capabilities, it is necessary to align the coordinate system orientations between the IMU and OPT. In this study, we compare the application of two coordinate transformation-based orientation alignment methods between two coordinate systems. The first method (M1) applies angular velocity coordinate transformation, while the other method (M2) applies gyroscopic angle coordinate transformation. In M1 and M2, the angular velocities and angles, respectively, are acquired during random movement for a least-square algorithm to determine the alignment matrix between the two coordinate systems. The performance of each method is evaluated under various conditions according to the type of motion during measurement, number of data points, amount of noise, and the alignment matrix. The results show that M1 is free from drift errors, while drift errors are present in most cases where M2 is applied. Thus, this study indicates that M1 has a far superior performance than M2 for the alignment of IMU and OPT coordinate systems for motion analysis.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.259-270
• /
• 2004

The purpose of this study was to analysis of pelvis and lower extremity using orientation angles during a developpe a la seconde. Data were collected by Kwon3D program. Two females professional modem dancer were participated in this experiment. Subjects performed a developpe a la seconde in meddle heights(about 90 dog.) The results were as follows. The orientation angles of pelvis were, in most cases, caused by the movement of trunk and thigh. It was restricted the movement of pelvis within narrow limits because the movement of pelvis was very important to lower extremity alignment. The orientation angle of shank against thigh showed a change of angle about $3-6^{\circ}$ in internal external rotation. The orientation angle of foot against shank showed a change of angle about $6-7^{\circ}$ in internal external rotation.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.165-170
• /
• 2011

In this paper, for the accurate estimation of the position and orientation of the UUV (unmanned underwater vehicle), an AHRS (Attitude Heading Reference System) was developed using the IMU (inertial measurement unit) sensor which provides information on acceleration and orientation in the object coordinate and the initial alignment algorithm and the E-KF (extended Kalman Filter). The initial position and orientation of the UUV are estimated using the initial alignment algorithm with 3-axis acceleration and geomagnetic information of the IMU sensor. The position and orientation of the UUV are estimated using the AHRS composed of 3-axis acceleration, velocity, and geomagnetic information and the E-KF. For the performance test of the orientation estimation of the AHRS, a testbed using IMU sensor(ADIS16405) and DSP28335 coded with an E-KF algorithm was developed and its performance was verified through tests.

• Journal of Information Display
• /
• 제8권1호
• /
• pp.6-9
• /
• 2007

Orientational alignment patterns have been proven to be that they are very useful for realizing diverse properties of liquid crystals. Here we produced the patterns combining interfered laser beams. A photo-isomerizable polymer including azo unit, which induces nematic liquid crystal alignment to the polarized laser light, was used as the alignment to layer. Double irradiations into two orthogonal directions brought the orientation patterns similar to the checkerboard. It indicates the possibility of bistability on those patterns.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.303-312
• /
• 2001

The fabrication of liquid crystal display (LCD) panels involves several thermal processes such as imidization of the alignment layer (AL) and annealing of the rubbed polyimide AL. The nature of these processes on the LC alignment, especially on the pretilt angle (Θ$\_$p/) has been systematically studied, employing various types of polyimide structures. The imidization effect depends on the nature of polyimid precursors; Θ$\^$p/ increases with the degree of the imidization for the main-chain type of ALs, due to the decrease in the surface polarity, but this relation is not applicable to the alkylated ones in which the steric effect at the AL surface by the aliphatic side chains is dominant. Annealing of the rubbed polyimide AL deteriorates its rubbing-induced molecular orientation and subsequently the overlying LC alignment, resulting in the decrease in Θ$\_$p/. Especially, annealing of the LC cell affects the LC-AL interaction as well as the AL orientation and thus its effect on LC alignment depends sensitively on the nature of LC-polyimide interface; aromatic moiety in the polyimide structure gives better thermal stability of LC alignment while fluorinated polyimide ALs induce the less stable alignment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1163-1166
• /
• 2004

Cinnamate group is well-known for the dimerization reaction by ultra-violet irradiation and cinnamate polymers are studied for photo-alignment materials. The cinnamate groups of flexible polymer are found to produce LC alignment parallel to polarization direction of ultra-violet light, which is contrary to the LC orientation on conventional cinnamate polymers. The un-reacted cinnamate groups in the flexible polymer are also found to participate in cycloadducts formation by additional thermal reaction that preserves the orientation of cycloadducts, leading to the enhancement of thermal stability of LC alignment.