• Archives of Pharmacal Research
• /
• v.29 no.11
• /
• pp.1055-1060
• /
• 2006

The objective of this study was to formulate itraconazole semisolid dosage forms and characterize their physicochemical properties. Itraconazole and excipients such as polysorbate 80, fatty acids, fatty alcohols, oils and organic acids were melted at $160^{\circ}C$. The fused solution was then cooled immediately at $-10^{\circ}C$ to make wax-like semisolid preparations. Their physicochemical attributes were first characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectrometry. The solubility of itraconazole in semisolid preparations and their dispersability in the simulated gastric fluid were also determined. Our semisolid preparations did not show any distinct endothermic peak of a crystalline form of itraconazole around $160-163^{\circ}C$. This suggested that it was changed into amorphous one, when it was formulated into semisolid preparations. In addition, the distinctive functional peaks and chemical shifts of itraconazole were well retained after processing into semisolid preparations. It could be inferred from the data that itraconazole was stable during incorporation into semisolid preparations by the hot melt technique. In particular, itraconazole semisolid preparations composed of polysorbate 80, fatty acids and organic acids showed good solubility and dissolution when dispersed in an aqueous medium. It was anticipated that the semisolid dosage forms would be industrially applicable to improving the bioavailability of poorly water-soluble drugs.

• Conservation Science in Museum
• /
• v.13
• /
• pp.23-31
• /
• 2012

The object artifacts of this study are the iron artifacts owned by the Kyunghee University Central Museum. The surfaces of the iron artifacts are opaque due to the coated materials which are presumed to be paraffin or bee's wax while they are plate-shaped and exist in thickly exfoliated condition caused by severe corrosion developed on the overall surfaces. Therefore, in order to remove the coated materials away from the surfaces of the artifacts rather safely, reversibility tests have been carried out and the conservation treatment was performed upon the basis of and in application of the experimental results. The study methodologies are that: first, the FT-IR analysis was carried out to determine the ingredients of the coating-treated material on the surface; second, by applying various kinds of organic solvents, the kinds of agents that allow the artifact's surface-coating material to be reversible have been identified through experiments; third, the most suitable agent for removing coating material was selected and applied to the real artifacts on the basis of the results of the reversibility tests. Results from the study: first, as a result of the FT-IR analysis, the coating agent used on the artifacts was identified to be of the same ingredients as those of paraffin; second, among organic solvents, xylene, toluene, trichloroethylene and methyl alcohol were identified to be usable for dissolving paraffin whereas toluene was judged to be the most suitable for removing the coating agent; third, when applying the selected agents on the real artifacts, due to the fact that removing the whole paraffin might cause the artifact to disintegrate, the paraffin of only the part that covered the surfaces opaquely was removed using cotton swab or gauze, thus completing the conservation treatment.

• Conservation Science in Museum
• /
• v.12
• /
• pp.89-92
• /
• 2011

Wooden object lacquerware and grass made object excavated were discovered in water. The object can be dry gradually for a long time when it is not kept at water evaporation. Wooden area of wet lacquerware wet organic materials mmersed kept lacquer only on the exterior after being decayed, and most of grass made object were adhered to the earth. In this study, the author preserved lacquerware and grass made equipment at Dahori Changwon that were relics in the Iron Age by using bees wax, rayon pper and layering technique. And, the author could remove ware from the earth to conserve lacquer and grass made object.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.45-51
• /
• 2010

The 2%, 3% of deer young antler, deer antler, oystershell, crabshell, eggshell were add into the 5%, 10%, 15% solution of glacial acetic acid and vinegar and after incubating it for 4 days at $30^{\circ}C$ respectively, solubility was analyzed. The result shows the difference was minute between glacial acetic acid and vinegar. In the 2% content of deer young antler, solubility was 42~47%, in the 3% content of it, solubility was 41~47%, with the acid concentration becoming higher, solubility increased slightly. In the 2% content of deer antler, solubility was 59~63%, in the 15% content of acid, solubility rather decreased. In the 2% content of oystershell, solubility was 85~96%, in the 3% content, solubility was 95~98%, in the 15% of acid density, it decreased. In the 2% content of crabshell, solubility was 79~88%, in the 3% content, solubility was 81~95%, and in case that acid density was high, solubility increased rather slightly. In the 2% content of eggshell, solubility was 84~96%, in the 3% content, solubility was 84~93%. When young deer antler and deer antler were heated for two hours at $100^{\circ}C$, solubility increased 19~24%, and in the case of crabshell, 10~11% increased. The above result and condition, and the result of pH and acidity don't have much influence on solubility. Thus, the 5% of acidity was enough to melt the 3% of sample. Highest were glacial acetic acid and vinegar in solubility to the various organic acid, and wax gourd vinegar melted the 85% of oystershell, the 78% of crabshell, the 28% of the deer young antler, and in the precipitation was made. Citric acid melted the 57% of deer antler, but it was precipitated with all other samples. Ascorbic acid melted the 92% of eggshell, and did the 37~54% of other samples.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.176-182
• /
• 2013

Several types of mesoporous alumina adsorbents with different physical properties were prepared by spray pyrolysis and were used for the separation/purification of the anticancer agent paclitaxel. The pore diameter of the adsorbents had a greater effect than did the surface area and the pore volume on the removal of plant-derived impurities. An appropriate pore diameter (~10.8 nm) was required for effective impurity removal. At a constant pore diameter, the surface area of the adsorbent affected not only the purity but also the yield of paclitaxel. Also, increasing the surface area of the adsorbent resulted in an increase in the adsorption of paclitaxel and impurities (biomass-derived tar and wax components). Removal of these impurities was confirmed by HPLC analysis of the absorbent after the treatment and TGA of the organic substances that were bound to the adsorbent.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.303-309
• /
• 2011

This study was carried out to investigate the evaluation of insecticidal efficacy and control effect in field of 10 environmental-friendly agricultural materials (EFAM) and seasonal occurrence at the vineyards to the Lycorma delicatula. L. delicatula nymphs occurred from late May to late August the highest early June (1st nymph) while adults occurred from late July to November with the highest peak of early October (preovipositing female) in 2010. Total population density of L. delicatula was the highest in early June. For the 3rd~4th nymphal instars and adults, EFAM (Spider, Jindikap-plus and Byejin-${\alpha}$) showed perfect insecticidal activity 2hour after treatment. Seoncho showed insecticidal activities 96.7% within 48 hour. Residual effects between EFAM showed 55.5% Spider at recommended concentration at 7 days after treatment(DAT), the other EFAM had low efficacy. Jindikap-plus and Spider showed 99% control value on nymphs in the field test at 3DAT, appeared control value more than 90% at 7DAT. Also, the control effects of Jindikap-plus and Spider were showed the adult mortality of 100% and 98.2% respectively at 3DAT, 90.6% and 84.6% respectively at 7DAT. Whereas the other EFAM had low efficacy. Jindikap-plus and Spider were excellent control effects compared with Acetamiprid WP.