• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1513-1520
• /
• 2010

A bacterium capable of producing melanin pigment in the presence of L-tyrosine was isolated from a crop field soil sample and identified as Klebsiella sp. GSK based on morphological, biochemical, and 16S rDNA sequencing. The polymerization of this pigment occurs outside the cell wall, which has a granular structure as melanin ghosts. Chemical characterization of the pigment particles showed then to be acid resistant, alkali soluble, and insoluble in most of the organic solvents and water. The pigment got bleached when subjected to the action of oxidants as well as reductants. This pigment was precipitated with $FeCl_3$, ammoniacal silver nitrate, and potassium ferricynide. The pigment showed high absorbance in the UV region and decreased absorbance when shifted towards the visible region. The melanin pigment was further charecterized by FT-IR and EPR spectroscopies. A key enzyme, 4-hydroxyphenylacetic acid hydroxylase, that catalyzes the formation of melanin pigment by hydroxylation of L-tyrosine was detected in this bacterium. Inhibition studies with specific inhibitors, kojic acid and KCN, proved that melanin is synthesized by the DOPA-melanin pathway.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.711-715
• /
• 2004

The stability of 80% ethanol-soluble pigments from Monasus purpureus CBS 281.34 was investigated according to storage temperature, pH and addition of organic acid. Also, the stability of ethanol-soluble pigment in aqueous system was examined after the addition of distilled water in the range of 0∼80% during the storage at 1$0^{\circ}C$ and 2$0^{\circ}C$ for 4 weeks with water soluble pigment. The heat stability was the highest (9.74%) when the 80% ethanol-soluble pigments were stored at 1$0^{\circ}C$ for 4 weeks. However, the 80% ethanol-soluble pigments stored at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 24 h and 12 h greatly decreased by 23.06% and 30.36%, respectively. Although the 80% ethanol-soluble pigments were stable in the range of pH 4∼8, the degradation rate of pigment increased at pH 2 and PH 10.80% ethanol extract was adjusted to PH 4 by adding organic acids. The rate of pigment degradation was not different from control for 4 weeks. Red pigment was stable in the treatment of organic acids. And the stability of ethanol-soluble pigment in aqueous system was gradually decreased as the pigment content and storage time increased. Additionally, the stability of ethanol-soluble pigment was higher at 1$0^{\circ}C$ than at 2$0^{\circ}C$.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.2
• /
• pp.107-119
• /
• 2001

Compared on dye, pigment is not colored to textiles, fixed by binders, so it has been used for less expensive textiles. However, the function of a binder hs been improved s organic chemical industry develops, and the flexibility and softness of textiles hs gotten better. Some of dye printing is being replace by pigment printing. Pigment printing skills illuminated and make colors represented cleariy. Since their durabillty is reasonably good and washing processes are not needed, further development of these printing skills are predictable. This study suggests color samples though theoretical researches and experiments on pigment printing that causes less pollution and en be colored on any type of textiles. Especially, over printing can be used in industrial fields because it saves processing and expense. For the improvement of pigment printing skills, more improved studies on binders are expected.

• 보존과학연구
• /
• s.28
• /
• pp.121-147
• /
• 2007

A large variety of mineral pigments has been used for Korean paintings and it has known that organic pigments have been used together on the Buddhist painting and the portrait. Haehakbando-do, which is from Honolulu Academy Museum in the United States, 12-fold screen was commissioned by Court of the late Joseon Dynasty in order to pray for the King's longevity. Therefore, it seems that all material used including pigments were selected very carefully and a great deal of technical effort was gone into its process. The purposes of this research were to estimate the pigments and the contributory elements of each color used on Haehakbando-do, in accordance with the conservation treatment carried out by Gochang Conservation Institute throughout last year. Without extracting sample, property of pigment was measured by nondestructive method, X-ray spectral analysis, and by comparing with the data about ancient pigments. In spite of the limited range of pigment analysis by nondestructive method, it should be noted that this method would not cause damage to the cultural properites. White pigment was found in all colored parts except the background, so it can be suggested that white color was used as a grounding of other color pigments. This would be flake white[$2PbCO_3{\cdot}Pb(OH)_2$] as Pb was found. Pb was the only element could be found in yellow, however, it can be organic pigment like Gamboge as same as background. Red would be Cinnabar (HgS) as hydrargyrum (Hg) was detected. For the light purple in cloud, organic pigments were probably used since any element is not detected except for Pb, which is used for background. It is possible that green color is the mixture of Malachite[$CuCO_3{\cdot}Cu(OH)_2$] and Azurite [$2CuCO_3{\cdot}Cu(OH)_2$], which share Cu as their main element. Azurite[$2CuCO_3{\cdot}Cu(OH)_2$] was used for bluish pigments. Black is carbon compound. For gold, solid gold (Au) was detected. It shows that gold was gilded on the flake white background. Red painted on the frame of screen was identified as Cinnabar (HgS) and the gold pattern was solid gold (Au). The supporting leg of folding screen was made of brass because both copper and zinc were detected. In conclusion, white pigment was used as grounding of all colors of Haehakbando-do, and specific pigments were used for each color. Additionally, result from the analysis of several pigments shows that mineral pigment and organic pigment, or different mineral pigments were mixed to make various colors.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2016

Natural colorant extracts were obtained by extraction from tumeric root, gardenia seeds, mugwort and green tea using water, methanol, ethanol and acetone as extractants at room temperature for 3 hours under shaking condition(180rpm) with liquor ratio(solid:solvent; 1:100). The main pigment components of tumeric root, gardenia seeds, mugwort and green tea are known to be curcumin, crocin, chlorophyll b and epigallocatechin gallate, respectively. The effects of the kind of extractant and pH on the color characteristics of natural colorant extracts were investigated. The solubility parameters of pigment components were determined to find adequate extractant. The solubility parameters of curcumin, crocin, chlorophyll b and epigallocatechin gallate were found to be 27.85, 29.40, 19.48 and $37.97(J/cm^3)^{1/2}$. As expected, solvents that have a solubility parameter similar to that of pigment component were generally found to be effective to obtain pigment extracts having high visible absorbance(A). The extract(pigment/solvent) with high visible absorbance was generally found to have low $L^*$(lightness) and high Chroma($C^*$, purity).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.33-42
• /
• 2009

This study was performed to evaluate the hexavalent chromium content in flexography inks and organic pigments used as colorants for the ink. The digestion of sample was carried out under alkaline condition, and the content of soluble hexavalent chromium extracted from samples was determined by UV-visible colorimetric analysis method after alkaline digestion. Duplicate sampling system to obtain two digested samples, was applied in this study. To determine the hexavalent chromium content in the flexography ink and organic pigment colorimeteric analysis was employed. Because the organic pigment is the main ingredient of flexography ink it is important to remove the errors associated with the colorant of the ink in colorimetric determination. The duplicate sampling system allowed us to correct the errors associated with the colorimeteric measurement. The additional filtration was found an essential step to exclude colorimeteric error derived from the various precipitates. The soluble hexavalent chromium content in flexography inks was generally less than 5 ppm. Yellow, violet and some magenta colors showed higher soluble hexavalent chromium contents. The content of hexavalent chromium in organic pigments was greater than flexography inks, and yellow, violet and some magenta pigments contained greater amount of hexavalent chromium, which indicated that the hexavalent chromium in inks derives from the colorants. The soluble hexavalent chromium content in linerboards were below 1 ppm, and no hexavalent chromium was detected in UKP. Results suggested that flexography ink is the main factor to cause hexavalent chromium in linerboard and organic pigments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.81-99
• /
• 1996

The characteristics of printing inks are affected, to a greater or lesser extent, by the size and distribution of the pigment particles in the dispersion. Color strength, transparency and gloss increase with a decrease in particle size of pigments and with an increase in surface area of pigments. On the contrary, opacity and lightfastness tend to increases with an increase in particle size of pigments and with a decrease in surface are and particle size if pigments on the physical properties of printing ink which made up vehicles for sheet fed and organic pigment Lake Red C(C.I Pigment Red 53:1) that different surface area and particle size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.392-393
• /
• 2006

Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the sysmatic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.348-355
• /
• 1999

Effects of pH, sugars, organic acids, metal ions, ascorbic acid and light on the stability of anthocyanin pigment extracted from purple-fleshed potato (Solanum tuberosum L.) were studied. The pH had marked influences on the color of the potato anthocyanin pigment: i.e., the lower the pH of the anthocyanin solution was, the more stable and intenser of the pigment was. It showed characteristic bathochromic shift as the pH of the solution increased. Generally, the addition of sugars into the purple-fleshed potato anthocyanin solution caused decrease in color stability of the pigment. Among the sugars tested, maltose was the most deleterious followed by sucrose, galactose, fructose and glucose. The addition of organic acids greatly increased the stability of the pigment. Malic acid was found to be the most effective in stabilizing the pigment followed by tartaric, citric and succinic acids, while malonic acid was found to be deteriorative to the stability of the pigment. Most metal ions except $Cu^{2+}$ increased stability of the pigment-especially, $Cd^{2+}\;and\;Al^{3+}$ were more effective than the others. Ascorbic acid degraded the pigment considerably, but the adverse effect was diminished by adding thiourea. Light gave an adverse effect to the stability of the purple-fleshed potato anthocyanin pigment, which could be minimized by shielding the light from the pigment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2004

Carbon black have not been used as pigment material in cosmetic because of very low density and dispersity, but carbon black have applicable character as black pigment because of non-toxic, stable physico-chemical property, and black colority. In this study, mesoporous silica samples were synthesized by sol-gel reaction using surfactants-template method; TEOS (tetraethoxysilane) - a) PEO/lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene glycol in ethanol/water solution. Synthesized organic-inorganic hybrid - silica were heat-treated in N2 condition at 500$^{\circ}C$. Mesoporous silica with black carbon in pore have the effective density and show the good dispersity in both hydrophilic and hydrophobic solvent. Properties of the samples were measured; specific surface area (750㎡/g) and pore size (4-6nm) using BET, pore structure (cylindrical type) using XRD, morphology (spherical powder with 0.1-0.5$\mu\textrm{m}$ partical size) of the samples using SEM. Carbon-silica black color applied to mascara, it shows a dark black colority and good dispersity as compared with the general black color titania pigment. Moreover, it is possible to control the density of black color pigment because it is possible to control pore volume and particle size of mesoporous silica properly. It show the good volume effects in mascara. That is why possible to apply all kinds of cosmetic products.