• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.34-41
• /
• 2001

It is well known that bioassay on the low organic matters in water have developed from the two methods. One is assimilable organic carbon(AOC) that makes use of the maximum growth biomass of the pure strains for the standard substrates, the other is biodegradable dissolved organic carbon(BDOC) that determines the fraction of dissolved organic carbon(DOC) available for microbial utilization. The purpose of this study was to upgrade the measurement method of BDOC in natural water or drinking water. BBOC was determined by means of the bacterial growth and the DOC decrease at the same time. The origin inoculums were used to the suspended bacteria from Han River water, The initial optimum biomass and incubation time for initial DOC were induced by variation of nutrient repression and inoculums. The time reached to minimum DOC was selected as incubation time. The initial optimum biomass for Han river water was about 1000~5000 CFU/mL, respectively. In a sufficient biomass, suitable incubation time was about 3~5 day. It was indirectly calculated BDOC on maximum growth rate by measuring growth yield of indigenous bacteria. But it was difficult to adapt growth yield coefficient because of irregular bacterial growth. The measured 3 day BDOC was close to BDOC calculated with our proposed experimental equation between DOC and BDOC. It shows that the quantification of BDOC with this experimental equation can be used indirectly.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.55-57
• /
• 2001

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.235-241
• /
• 2005

Incorporation of solid electrodes frequently involves plasma-based processing. The effect of plasma can influence the physical characteristics, depending on the magnitude in plasma. The undesired feature of plasma-induced damage should be prevented in characterizing the ultra-thin materials, such as ultra-thin films and organic monolayers. The current work at first proves the applicability of a liquid phase electrode in the electrical/dielectric properties through comparative work using Al and Hg on ultrathin $Al_2O_3$ films deposited through atomic layer deposition at low temperature: Two types of metals such as Aluminum (Al) and mercury (Hg) were used as electrodes in $Al_2O_3$ thin films in order to investigate the effect of electrode preparation on the current-voltage characteristics and impedance features as a function of thickness in $Al_2O_3$ film thickness. The success of Hg in $Al_2O_3$ thin films is applied to the AC and DC characterization of the organic monolayers obtained using the Langmuir-Blodgett method. From the DC current-voltage characteristics, the diode-like response is found to originate from the bulk response of the organic materials, evidenced by the fact and the capacitance is inversely related to the absolute thickness of organic layers.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.2
• /
• pp.302-309
• /
• 2014

In this study, the characteristics of soybeans with different cultivation methods depending on their origins and the properties of tofu made from these soybeans were studied. The isoflavone content was higher in the general Korean soybeans compared to the organic American soybeans. There were no significant differences among the Chinese soybean samples, so the cultivar method was considered to have a greater effect on the isoflavone contents rather than the cultivation method. The protein contents were higher in the tofu made from the general Chinese soybeans and the organic Korean soybeans. Furthermore, the tofu made from the organic Chinese soybeans contained the least amount of proteins. Isoflavone contents were not significantly different among the samples. Texture profile analyses consisting of hardness, cohesiveness, adhesiveness, springiness, and gumminess were all shown to be higher in the organic tofu than in general tofu, with the exception of adhesiveness. In sensory evaluation, color and texture were significantly different according to the samples, and the differences were found to be affected more by the origin of soybeans rather than the cultivation methods. According to this study, the physicochemical properties of the soybeans and tofu seemed to be influenced by the cultivation region rather than the methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.53-54
• /
• 2005

We report on plasma damage free-sputtering technologies for organic light emitting diodes (OLEDs), organic thin rim transistor (OTFT) and flexible displays by using a box cathode sputtering (BCS) method. Specially designed BCS system has two facing targets generating high magnetic fields ideally entering and leaving the targets, perpendicularly. This target geometry allows the formation of high-density plasma between targets and enables us to realize plasma damage free sputtering on organic layer without protection layer against plasma. The OLED with top cathode prepared by BCS shows electrical and optical characteristics comparable to OLED with thermally evaporated Mg-Ag cathode. It was found that TOLED with ITO or IZO top cathode layer prepared by BCS has much lower leakage current density ($1\times10^{-5}$ mA/cm2 at -6V) than that ($1\times10^{-1}\sim10^{\circ}mA/cm^2$)of OLED prepared by conventional DC sputtering system. This indicates that BCS technique is a promising electrode deposition method for substituting conventional thermal evaporation and dc/rf sputtering in fabrication process of organic based optoelectronics.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.70-77
• /
• 2003

Theoretical estimation of overall stoichiometry for the microbial degradation of hazardous organic compounds is described. Half-reaction method based on microbial energetics was used in the theoretical estimation. In addition to the half-reaction method, other theoretical methods such as intermediate formation, oxygenation reaction, and estimation of the standard free energy of formation by group contribution theory were also applied. As a case study, the application of these methods was demonstrated for the estimation of microbial kinetics in the biodegradation of phenanthrene which was chosen as a model hazardous organic compound along with glucose and hexadecane. The cell yield, oxygen requirement, nitrogen requirement, and mineralization ratio could be estimated from the overall stoichiometry. It is believed that these theoretical estimation methods are useful tools for practical design and assessment of bioremediation of soil and groundwater contaminated with hazardous organic compounds.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1043-1046
• /
• 2013

Prediction of physicochemical properties of organic molecules is an important process in chemistry and chemical engineering. The MSEP approach developed in our lab calculates the molecular surface electrostatic potential (ESP) on van der Waals (vdW) surfaces of molecules. This approach includes geometry optimization and frequency calculation using hybrid density functional theory, B3LYP, at the 6-31G(d) basis set to find minima on the potential energy surface, and is known to give satisfactory QSPR results for various properties of organic molecules. However, this MSEP method is not applicable to screen large database because geometry optimization and frequency calculation require considerable computing time. To develop a fast but yet reliable approach, we have re-examined our previous work on organic molecules using two semi-empirical methods, AM1 and PM3. This new approach can be an efficient protocol in designing new molecules with improved properties.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.379-384
• /
• 1999

Langmuir-Blodgett(LB) films which have high ordered orientation and ordering structure are fabricated by LB method which deposit the ultra-thin films of organic materials at a molecular level. The electrical characteristics of stearic acid LB ultra-thin films for the horizontal direction were investigated to develop the gas sensor using LB ultra-thin films. The optimal deposition condition to deposit the LB ultra-thin films was obtained from $\pi-A$ isotherms and the deposition status of stearic acid LB ultra-thin films was verified by the measurement of deposition ratio, UV-absorbance, and electrical properties for LB ultra-thin films. The conductivity of stearic acid LB ultra-thin films for horizontal direction was about $10_{-8}[S/cm]$. The activation energy for LB ultra-thin films with respect to variation of temperature was about 1.0[eV], which was correspond to semiconductor material. The response characteristics for organic gas were confirmed by measuring the response time, recovery time, and reproducibility of the LB ultra-thin to each organic gas. Also, the penetration and adsorption behavior of gas molecule were confirmed through the organic gas response characteristics of LB ultra-thin films with respect to temperature.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.2
• /
• pp.83-89
• /
• 2011

This studies were conducted to investigate the growth responses and yields of Astragalus membranaceus Bunge which were grown with organic cultivation using two organic fertilizers and two green manure crops of hairy vetch and rye in 2008 and 2009. The lengths of stems and roots were not clearly different between organic and conventional cultivations. The root diameters and the branch numbers were slightly thicker and more in all treatments of organic cultivation than that of conventional cultivation in 2008, although they were not significantly different between two cultivating methods in 2009. The dry weights of shoot and root were heavier on organic cultivation than those on conventional cultivation. The T/R ratios were commonly higher in organic culture, showing more clearly in 2008 than 2009. The yields were generally higher in organic cultivation than those in conventional cultivation in 2008 although the effect did not clear on yield in 2009. The organic cultivation using of organic fertilizers and green manure crops would be new method to have safety and qualitative products. The techniques of organic cultivation for Astragalus membranaceus Bunge would be studied more on utilizing the natural organic resources.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.51-58
• /
• 2016

In the Integrated Two-Phase Anaerobic Digestion (ITPAD) process, acid and methane fermentation take place in one reactor, which has advantages to cope with organic load variation and reduce foot-print required, compensating disadvantages of Conventional Separated Two-Phase Anaerobic Digestion (CSTPAD). In the present work, organic matter degradation efficiency and biogas generation amount and other performance parameters of the ITPAD fed with food waste leachate were analyzed. In addition, feasibility study on the ITPAD method was performed by comparing its digestion efficiency with that of the CSTPAD. Organic matter alteration and biogas generation of the integrated method were examined for approximately 130 days based on the 5ton/day scaled pilot plant. Experiment results revealed that organic matter removal rate was 80% for mean food waste leachate input amount of $4.1m^3/day$. The biogas generation rate was $63.0m^3$ per ton of food waste leachate input, corresponding to the input VS amount of $0.724m^3/kg-VS_{added}$, and methane content of generated biogas was approximately 61.3%. The ITPAD has a comparable or higher organic matter removal efficiency compared to the conventional separated two-phase anaerobic digestion method. Consequently, the ITPAD method has a great need to commercialize a food waste leachate treatment technology against highly concentrated organic waste leachate.