• KSBB Journal
• /
• v.11 no.6
• /
• pp.654-662
• /
• 1996

Bacterial strains which degrade crude oil were isolated by liquid culture from oil-spilled soil, and four isolates were selected among them. The strain Hl7-1 was finally selected after testing emulsifying activity and oil conversion rate. The strain Hl7-1 was identified as a Nocardia sp. based on the test for morphological, biochemical and physiological characteristics. It appears to be highly specialized for growth on crude oil in minimal salts medium since it showed preference for oil or degradation products as substrates for growth. It was found that it could grow on at least fifteen different hydrocarbons. The optimum cultural and environmental conditions were seeked. Cell growth and emulsification activity as a function of time were also determined. Crude oil degradation and the reduction of product peak was identified by the analysis of remnant oil by gas chromatography after 3 days of cultivation. Approximately 83% of oil were converted into a form no longer extractable by organic solvents.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.482-488
• /
• 2015

Biological treatment is promising alternative to conventional air pollution control method. Bioreactors for air pollution control have found most of their success in the treatment of dilute and high flow waste air streams containing volatile organic compounds and odor. The studies of mass transfer in biotrickling filters for air pollution control were of importance in order to control and optimize the purification process. The objectives of this study were to develop the experimental methodologies to evaluate the mass transfer coefficients of gas/liquid(trickling liquid), gas/solid(biomass) and liquid/solid in three phase biotrickling filtration. Also, this study characterized the influence factors on mass transfer such as dynamic holdup volume, gas/liquid flow rate ratio, biomass weight in reactor and recirculation rate of trickling medium for each phase of biotrickling filter.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.103-109
• /
• 1998

We studied on the decoloring effect of viscose rayon by vapor type ozone processing using ozone's strong oxidation. When ozone is generated, it becomes high concentration in vapor state, but in the insolving process with water, there are a lot of lose of ozone. As a result, a study using ozone in vapor-high concentration state is needed. So, in this paper, vapor type ozone processing is used unlike previous ozone treatment method-an aqueous solution method-to get a good effect from shortening the processing time. When vapor type ozone processing was directly treated to fabrics, high concentration ozone was generated then in a short time oxidized a dye existed in fabrics and finally decolored it. As vapor type ozone did not directly response to an organic dye, viscose rayon's decolorization was to be studied by changing pick up ratio(60%, 50%, 40%, 30%, 20%) using water as a medium. When pick up ratio of water was 40%, fabric's whiteness was improved but tensile strength and elongation were reduced. So 60 minutes was assumed as the most adjust time to minimize the reduction of fabric's tensile strength and elongation moreover of maximize the improvement of whiteness.

• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.42-47
• /
• 2018

Recently, as the demand for limited resources continues to rise and problems of resource depletion rise worldwide, the importance of renewable energy is gradually increasing. In order to solve these problems, various methods such as energy conservation and alternative energy development have been suggested, and biogas, which can utilize the gas produced from biomass as fuel, is also receiving attention as the next generation of innovative renewable energy. New and renewable energy using biogas is an energy production method that is expected to be possible in large scale because it can supply energy with high efficiency in compliance with energy supply method of recycling conventional resources. In order to more efficiently produce and manage these biogas, a biogas plant has emerged. In recent years, a large number of biogas plants have been installed and operated in various locations. Organic wastes corresponding to biogas production resources in a biogas plant exist in a wide variety of types, and each of the incoming raw materials is processed in different processes. Because such a process is required, the case where the biogas plant process is inefficiently operated is continuously occurring, and the economic cost consumed for the operation of the biogas production relative to the generated biogas production is further increased. In order to solve such problems, various attempts such as process analysis and feedback based on the feedstock have been continued but it is a passive method and very limited to operate a medium/large scale biogas plant. In this paper, we propose "CNN-based production yield prediction algorithm for increasing process efficiency of biogas plant" for efficient operation of biogas plant process. Based on CNN-based production yield forecasting, which is one of the deep-leaning technologies, it enables mechanical analysis of the process operation process and provides a solution for optimal process operation due to process-related accumulated data analyzed by the automated process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.235-241
• /
• 2016

The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties. The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.621-626
• /
• 2016

The present study evaluated the variations in soil microbial population of controlled horticultural land used for lettuce (Lactuca sativa) cultivation by their fatty acid methyl ester and chemical properties. We utilized four treatment groups, no treatment (NT), culture medium (CM), Bacillus subtilis S37-2 (KACC 91281P) ${\times}10^6CFU\;mL^{-1}$ (BS1), and Bacillus subtilis $S37-2{\times}10^7CFU\;mL^{-1}$ (BS2) and analyzed these variations throughout the before treatment and harvesting stage. The chemical properties such as pH, organic matter, available phosphate, and electrical conductivity in soils before treatment and harvesting stage showed no significant difference among the treatments. Total numbers of bacteria and microbial biomass C in soil treated with BS1 were larger than those of NT, CM, and BS2, whereas total number of fungi at the harvesting stage was significantly lower in the BS1 soil than in the NT and CM soils (P < 0.05). On basis of leaf length, leaf width, leaf number and leaf weight, the growth characteristics lettuce on the soil treated with BS1 and BS2 was faster than those of NT and CM soils. Yield of lettuce with treated BS1 and BS2 were 35% and 29% more than that of NT, respectively.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.751-765
• /
• 2011

The purpose of this study is to apply the Trencadis images in Antony Gaudi's work to a design motive and thus provide a new concept for a knitwear design by combining double-knitted fabrics with patchwork applique, taping, stitching and quilting. This study examines the bibliographic text and precedent research related to Antony Gaudi and his works, and analyzes the historical background and formative and stylistic characteristics of Trencadis as it appeared in Gaudi's architectural works. Also this study also examines the characteristics of knitwear and knitting theory while exploring the formative elements and the combined techniques used in modern knitwear design through fashion magazines, medium images, and online sources. The results are as follows: First, Gaudi's work that applies a Trencadis technique has the characteristic of being creative, organic, and environmentally friendly. And in addition, its colorfulness inspires modern fashion design. Second, computerized knitting has been practiced in various ways and the fabrics knitted by both double-knitting jacquard and computerized knitting machines provide a new direction the creation of knitwear. A computerized knitting machine is especially effective for pictorial expression, and is suitable for showing the natural curve of the human body due to its sophistication. Third, as a result of applying a combined technique to the knitting of various fabrics, a combined or fusion design, which is a recent megatrend, is very effective for the design of knitwear while increasing its aesthetic value. Moreover, utilizing techniques that combine patchwork applique, taping, stitching and quilting will create higher value in knitwear. Lastly, with a project of applying combined techniques in the creation of knitwear, designers can become much more creative while taking their imagination much further.

• Korean Journal of Microbiology
• /
• v.32 no.4
• /
• pp.252-257
• /
• 1994

A new hydrogen sulfide-oxidation bacterium, Thiobacillus sp. was isolated from waste coal mine water around Hawsun in Chunnam province. The isolate was motile gram-negative rod shape, formed spore and grew up to be aerobically facultative chemolithotroph by using energy released from the oxidation of reduced inorganic sulfur compounds. It could assimilate various kinds of organic compounds and grew well upon thiosulfate-supplemented basal medium. To the lelvel of 32 mM in thiosulfate concentration, thiosulfate in itself was utilized as energy source for growth. However, from those of the higher concentration than 32 mM, thiosulfate functioned specifically as the substrate inhibitor rather than as the energy source. It was found that the optimum thiosulfate concentration for growth was 32 mM. The G+C content of the DNA was 65.0 mol%. The isolate had 16 : 1 + 17$_{cyc}$, 16 : 0 as their major non-hydroxylated cellular fatty acids, 3-OH 12 : 0 as a hydroxylated fatty acid and also contained unidentified $C_{18}$ branched fatty acid. The ubiquinone system in the respiratory chain was Q-9. Based on the physiological and biochemical characteristics, the isolate was assigned to a novel species of the genus Thiobacillus sp. iw.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.39-46
• /
• 1998

This study was carried out to obtain the basic data for artificial culture of Sparassis crispa. The optimal conditions for the mycelial growth were $25^{\circ}C$ and pH 4, respectively. The mycelial density of S. crispa was most compact in the Hamada media, whereas colony diameter was prominent in the Hoppkins media. Carbon sources such as maltose, arabinose and mannitol were favorable for stimulating a mycelial growth of S. crispa. Glycine, one of nitrogen sources also appeared to be favorable to the mycelial growth. The optimum C/N ratio was about 20 : 1 in case that 1% glucose as carbon source was mixed with the basal medium. Fumaric acid or lactic acid as organic acid was most favorable to the mycelial growth.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.50-59
• /
• 2008

A greenhouse experiment was conducted to investigate the role of the arbuscular mycorrhizal(AM) fungus, Glomus mosseae(BEG 107) in enhancing growth and arsenic(As) and phosphorus(P) uptake of white clover(Trifolium repens) and evening primrose(Oenothera odorata) in soil collected from a gold mine having concentrations of 381.6 mg total As $kg^{-1}$ and 20.5 mg available As $kg^{-1}$. Trifolium repens and O. odorata are widely distributed on abandoned metalliferous mines in Korea. The percent root colonization by the AM fungus was 55.9% and 62.3% in T. repens and O. odorata, respectively, whereas no root colonization was detected in control plants grown in a sterile medium. The shoot dry weight of T. repens and O. odorata was increased by 323 and 117% in the AM plants compared to non-mycorrhizal(NAM) plants, respectively. The root dry weight increased up to 24% in T. repens and 70% in O. odorata following AM colonization compared to control plants. Mycorrhizal colonization increased the accumulation of As in the root tissues of T. repens and O. odorata by 99.7 and 91.7% compared to the NAM plants, respectively. The total uptake of P following AM colonization increased by 50% in T. repens and 70% in O. odorata, whereas the P concentration was higher in NAM plants than in the AM plants. Colonization with AM fungi increased the As resistance of the host plants to As toxicity by augmenting the yield of dry matter and increasing the total P uptake. Hence, the application of an AM fungus can effectively improve the phytoremediation capability of T. repens and O. odorata in As-contaminated soil.