• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.81-82
• /
• 2006

Doping is a well-known method for improving electroluminescent (EL) efficiency of organic light emitting diodes. In our study, doping with 2 materials simultaneously, we could achieve improved EL efficiency. The emission layer was tris-(8-hydroxyquinoline)aluminum, and the 2 dopants were N,N'-dimethyl-quinacridone (DMQA) and 10-(2-Benzothiazolyl)-2, 3, 6, 7-tetrahydro-1,1,7,7,-tetramethyl 1-1H, 5H, 11H-[1] benzopyrano [6,7,8-ij]quinolizin-11-one (C-545T). The EL intensity of co-doped device was nearly flat, it shows that co-doping technique could be a effective way to improve the EL efficiency. EL efficiency of Single-doped device based on DMQA and C-S45T were ~6.47Cd/A and ~7.45Cd/A, respectively. Co-doped device showed higher EL efficiency of ~8.30Cd/A.

• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.323-327
• /
• 1999

A water-soluble conducting polymer (CPP400 Paste) containing a derivative of polythiophene with several dopant was investigated as an anode material for organic electroluminescent devices. The device of ITO/CPP 400 Paste/TPD/$Alq_3$/Li:Al was fabricated, where CPP 400 Paste films were prepared by spin coating and TPD and $Alq_3$, films were prepared by vacuum evaporation. It was found that the turn-on voltage, current density, and luminance of the devices were dependent upon the thickness of CPP 400 Paste film in the Electroluminescent and current-voltage characteristics of the devices. This phenomena were explained by the energy level diagram of the device with the energy levels of the CPP400 Paste obtained by cyclic voltammetric method.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.40-46
• /
• 2019

To study the frequency response characteristics of alternating-current-driven organic light-emitting diodes (OLEDs), we fabricated blue-fluorescent OLEDs and analyzed their electroluminescent characteristics according to the alternating current voltage and frequency. The luminance-frequency characteristics of alternating-current-driven OLED was similar to that of a low-pass filter, and the luminance of high-voltage OLED decreased at higher frequency than low-voltage OLED. The luminance characteristics of the OLED according to the frequency is due to the capacitive reactance in the OLED, generated during the alternating current driving. The frequency response characteristics of the OLED according to the voltage is due to the decrease in internal resistance of the organic layer. In addition, the negative voltage component of the alternating current did not affect the frequency response of the OLED. Therefore, the electroluminescent characteristics of OLED with an alternating current power of 60 Hz are not influenced by the frequency.

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2000

Ethyl hydroxy ethyl cellulose의 고분자를 중심으로 하는 유기 결합제를 사용하고 형광체로서 ZnS:Cu와 유전체로$BaTiO_3$ 사용해 screen printing법에 의해 신광원으로서 많은 연구 개발이 집중되고 있는 유기분산형 백라이트 EL(Electroluminescent) 소자를 제조하였다. 제조된 백라이트용 유기 분산형 EL 소자의 특성은 $25[^{\circ}C]$, 100[V], 400[Hz]에서 $1.98[mA/\m^2]$의 전류밀도, O.075[W]의 power consumption, 정전용량 7.l[nF]를 나타내었다. 소자의 휘도는 50~150[V] 사이에서 $20~110[cd/\m^2]$의 밝기를 나타내였으며, 형광체의 색상변화는 ClE에 공인된 색 좌표에 의해 x=0.1711, y=0.3676의 bluish green의 색상을 나타내었다.

• 폴리머
• /
• 제24권1호
• /
• pp.90-96
• /
• 2000

고분자 정공 전달체로 LB 기법에 의해 제조한 PDPMA 초박막과 발광층으로 Alq$_3$를 사용하여 유기 발광소자를 제작하였다. 표면활성제로 arachidic acid를 사용하여 안정한 PDPMA 단분자막을 얻을 수 있었다. PDPMA LB 필름의 두께와 320nm의 최대 흡광도는 층수의 증가에 따라 거의 선형적으로 증가하였다. ITO/PDPMA LB 필름(19층)/Alq$_3$/Al으로 구성된 유기 적층형 소자는 DC 14V에서 2500 cd/m$^2$의 높은 휘도를 갖는 녹색 빛을 발광하였다. 특히 PDPMA LB 필름의 층이 15로 이루어진 발광소자의 구동전압은 4V의 매우 낮은 값을 나타내었다. PDPMA LB 필름의 두께 조절 및 분자 배향에 따른 EL 성능에 미치는 영향에 관하여도 검토하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.205-206
• /
• 2000

The capacitance-temperature (C-T) measurement technique is proposed in the present work to investigate the thermal stability of organic and polymeric thin films for organic electroluminescent display (OELD). The single layer devices with the individual materials were subjected to the C-T measurement, prior to the examination of the complete OELD. The single layer devices with the small molecules destroyed below $180\;^{\circ}C$ depending on the kinds of materials. However, the device with the hole-transporting polyimide did not show any relaxation up to $200\;^{\circ}C$. The small molecule based OELDs failed to emit light after annealing, whereas that with the hole-transporting polyimide worked well in spite of large reduction in intensity.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.85-90
• /
• 1998

In this study, organic electroluminescent devices(OELD) with a structure of a glass $substrate/ITO/TPD/Tb(ACAC)_3(Phen-Cl)/Alq_3/Al$ was fabricated by vacuum evaporation method, where Tb complex was known to have green light emitting property. Electroluminescent(EL) and I-V characteristics of this structure were investigated. This triple-layer structure shows the green EL spectrum at the wavelwngth of 546nm, which is almost the same as the PL spectrum of $Pb(ACAC)_3(Phen_Cl)$. It was found in current-voltage(I-V) characteristics of the devices that the operating voltage was about 12V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.914-916
• /
• 2003

Novel red organic electroluminescent (EL) dye, RED was developed for an application to the emission layer of EL device. Well known red material DCJTB was also used for comparison. Two kinds of devices were fablicated; one is ITO/ CuPc / TPD / 0.5% RED-1 in Alq3/ Alq3/ Li20/ Al and the other is ITO/ CuPc /TPD / 0.5% DCJTB in Alq3/Alq3/ Li20 / Al. External quantum efficiency of the EL device with RED was two times higher than that of the device with DCJTB. The maximum EL peak was detected at 635nm in the RED EL device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.253-257
• /
• 1998

Organic-based electroluminescent devices have attracted lots of interests because of their possible application as large-area flat pan디 display. In this study, current-voltage (I-V) characteristics of MEH-PPV thin films was investigated using various metal as a top electrode, where MEH-PPV thin films were prepared on 170 substrate by spin coating method and various metal such as Al, Ag, In, MgIn was deposited on MEH-PPV thin films as a top electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.609-612
• /
• 1999

Organic electroluminescent(EL) devices have received a great deal of attention due to their potential application as full-color displays. They are attractive because of their capability of multicolor emission, ease of fabrication, and operation at a low driving voltage. In this study, single and multiple quantum-well structures consisting of Eu(TTA)$_3$(bpy) complex well layer sandwiched between triphenyldiamine derivative (TPD) layers were fabricated and their photoluminescent electroluminescent characteristics were also investigated. Sharp emission at 616 nm has been observed from the Eu complex in multilayer, single and multiple quantum-well structures. Details on the explanation of electrical properties of these structures will be discussed.