• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.2
• /
• pp.107-119
• /
• 2001

Compared on dye, pigment is not colored to textiles, fixed by binders, so it has been used for less expensive textiles. However, the function of a binder hs been improved s organic chemical industry develops, and the flexibility and softness of textiles hs gotten better. Some of dye printing is being replace by pigment printing. Pigment printing skills illuminated and make colors represented cleariy. Since their durabillty is reasonably good and washing processes are not needed, further development of these printing skills are predictable. This study suggests color samples though theoretical researches and experiments on pigment printing that causes less pollution and en be colored on any type of textiles. Especially, over printing can be used in industrial fields because it saves processing and expense. For the improvement of pigment printing skills, more improved studies on binders are expected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.948-951
• /
• 2003

The electroluminescence (EL) properties were studied in organic light-emitting diodes with a red fluorescent dye, 4- (dicyanomethylene)- 2- tert-butyl-6 (1,1,7,7-tetramethyljulolidyl-9-enyl)- 4H- pyran (DCJTB) doped into tris-(8-hydroxyquinoline)aluminum ($Alq_{3}$), rubrene and the mixed matrix of $Alq_3$ and rubrene. The device with DCJTB doped into the $Alq_{3}$:rubrene mixed host shows an efficient red emission from DCJTB with a negligible EL emission from $Alq_{3}$ and a lower EL onset voltage compared to the device with DCJTB doped into the $Alq_{3}$ only host. The quantum efficiency is almost temperature-independent for the device with the $Alq_3:rubrene$ mixed host. The results indicate that recombination of injected electrons and holes occurs on rubrene and subsequent energy transfer to DCJTB dominates in the device with the $Alq_{3}$:rubrene mixed host.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.605-608
• /
• 2011

Hybrid composite membranes were prepared by coating poly(ethylene oxide) and $SiO_2$ particles onto the porous polypropylene nonwoven matrix. Gel polymer electrolytes prepared by soaking the hybrid composite membranes in an organic electrolyte solution exhibited ionic conductivities higher than $1.1{\times}10^{-3}Scm^{-1}$ at room temperature. Dyesensitized solar cell (DSSC) employing the hybrid composite membrane with PEO and 10 wt % $SiO_2$ exhibited an open circuit voltage of 0.77 V and a short circuit current of 10.78 $mAcm^{-2}$ at an incident light intensity of 100 $mWcm^{-2}$, yielding a conversion efficiency of 5.2%. DSSC employing the hybrid composite membrane showed more stable photovoltaic performance than that of the DSSC assembled with liquid electrolyte.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.434-436
• /
• 2000

In this study, we investigate the optical characteristics of merocyanine dye Langmuir-Blodgett(LB) film using the oscillation characteristics of quartz crystal. As results, the resistance and frequency shift at the parallel resonance under the UV irradiation is to be going down. This behaviour of resistance and frequency is different from the case of general mass adsorption into the organic film on the quartz crystal. Generally the frequency decrease of quartz crystal oscillator, which has been considered as mass loading, goes along with the resistance increase. Thus it has been suggested that the J-aggregate dissociation in merocyanine dye LB film by UV irradiation give rise to transformation of oscillation characteristics of quartz crystal.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.293-296
• /
• 2012

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.308-314
• /
• 2000

The dyeability of C. I. Disperse Violet 1 on polyester fiber in alkance including a small amount of water was investigated. Up to 1% of water in alkanes the dye uptakes were increased rapidly. The dyeing transition temperature of the polyester fiber in alkanes with 1% of water was $86.5^\circ{C}$ that is lower by $11^\circ{C}$ than $97.5^\circ{C}$ in alkanes only. This means that water plasticizes the polyester fiber, and that dyes begin to penetrate the polyester fiber at lower temperature. Addition of trichloromethane which is known as a strong plasticizer on polyester fiber, in alkanes, increased the dye uptakes of C. I. Disperse Violet 1 on polyester fiber at $100^\circ{C}$, but the dyeing transition temperature was lower by $3^\circ{C}$ than in alkanes only.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.98-102
• /
• 2001

To analyze the saturating process of $Cr^{4+}:YAG$ crystal and plastic organic dye as the saturable absorber, we have measured the residual optical losses between a free running and a passive Q-switching mode for various optical densities. The undepleted ground state population density and the saturated transmission of the saturable absorber have been evaluated by the additional optical losses with the increased threshold pump energies between two resonators. ill the passive Q-switching mode, the saturable transmission of saturable absorber is less than the maxrnium saturable transmission due to the undepleted ground state population density. nsity.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.149-157
• /
• 2023

Covalent organic frameworks (COFs) have shown promise in various applications, including molecular separation, dye separation, gas separation, filtration, and desalination. Integrating COFs into membranes enhances permeability, selectivity, and stability, improving separation processes. Combining COFs with single-walled carbon nanotubes (SWCNT) creates nanocomposite membranes with high permeability and stability, ideal for dye separation. Incorporating COFs into polyamide (PA) membranes improves permeability and selectivity through a synthetic interfacial strategy. Three-dimensional COF fillers in mixed-matrix membranes (MMMs) enhance CO₂/CH₄ separation, making them suitable for biogas upgrading. All-nanoporous composite (ANC) membranes, which combine COFs and metal-organic framework (MOF) membranes, overcome permeance-selectivity trade-offs, significantly improving gas permeance. Computational simulations using hypothetical COFs (hypoCOFs) demonstrate superior CO₂ selectivity and working capacity relevant for CO₂ separation and H₂ purification. COFs integrated into thin-film composite (TFC) and polysulfonamide (PSA) membranes enhance rejection performance for organic contaminants, salt contaminants, and heavy metal ions, improving separation capabilities. TpPa-SO₃H/PAN covalent organic framework membranes (COFMs) exhibited superior desalination performance compared to traditional polyamide membranes by utilizing charged groups to enable efficient desalination through electrostatic repulsion, suggesting their potential for ionic and molecular separations. These findings highlight COFs' potential in membrane technology for enhanced separation processes by improving permeability, selectivity, and stability. In this review, COF applied for the separation process is discussed.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.289-295
• /
• 1986

Spectroscopic studies have been carried out on the metachromatic behavior of methylene blue(MB) and acridine orange(AO) in the presence of polyvinylsulfate(PVS) and polystyrenesulfonate(PSS) The characteristic changes of meta-band with the change of P/D value are discussed in terms of stacking theory. It has been found that the stacking effect in the PVS-dye system is stronger than that in the PSS-dye system and that MB shows stronger stacking effect than AO. A stacking model and dimension of bound dyes on the surface of polymer chain is proposed on the basis of the previously suggested model of dimer found in the aqueous solution of planar aromatic dyes. The proposed model is found to be reasonable in accordance with the experimental results obtained by various workers.

• Membrane and Water Treatment
• /
• v.14 no.4
• /
• pp.163-173
• /
• 2023

The presence of high amounts of organic and inorganic contaminants in textile wastewater is a major environmental concern. Therefore, the treatment of textile wastewater is an urgent issue to save the aquatic environment. The disposal of large quantities of untreated textile wastewater into inland water bodies can cause serious water pollution. In this study, synthetic dye wastewater samples were prepared using orange dye in the laboratory. The synthetic samples were then treated by a batch adsorption process using the prepared activated carbon (AC) from date pits. The wastewater parameters studied were the pH, total dissolved solids (TDS), total suspended solids (TSS), electrical conductivity (EC) and salinity. The activated adsorption process showed that the maximum removal efficiencies of electric conductivity (EC), salinity, TDS and TSS were 65%, 92%, 89% and 90%, respectively. The removal efficiencies were proportional to the increase in contact time (30-120 min) and AC adsorbent dose (1, 3 and 5 g/L). The adsorption profile indicates that 5 g/L of adsorbent delivers better results for TDS, EC, TSS and salinity at contact time of 120 min. The adsorption characteristics are better suited to the pseudo-second-order kinetic model than to the pseudo-first-order kinetic model. The Langmuir and Freundlich isotherms were well suited for describing the adsorption or contact behavior of EC and TSS within the studied system.