• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.165-174
• /
• 2015

To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and number of ply(3, 4 and 5) on the specific gravity and mechanical properties of PR/GF composites were investigated in this study. The optimum length of GF was found to be about 1.0inch for achieving improved mechanical properties(tensile strength and initial modulus). The tensile strength and initial modulus of composites increased with increasing GF content up to 30wt%, which is favorable content range for SMC. The specific gravity, tensile strength/initial modulus, compressive strength/modulus, flexural strength/modulus and shear strength increased with increasing the number of ply up to 5, which is the maximum number of ply range for SMC. The effectiveness of ply number increased in the flexural strength > shear strength > compressive strength > tensile strength.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.204-208
• /
• 2002

A linear rod-like molecule, bis[4-(1,3-octadynyl)phenyl] terephthalate (2), consisting of two diacetylenic groups, was prepared. The unsymmetric diacetylene was prepared by the Cadiot-Chodkiewicz coupling reaction of 1-bromohexyne with 4-ethynylphenol and linked to a benzene core by an esterification reaction with terephthaloyl chloride in tetrahydrofuran. The thin film (200 nm thickness) of compound 2 was fabricated by the physical vapor deposition on a glass plate with a thermal evaporator. In the X-ray diffraction (XRD) study, the vapor deposited film on the glass plate showed peaks with d spacings of 19.4, 5.7, and 4.5 $\AA$. This XRD pattern was quite different from that observed for compound 2 isolated by recrystallization from methylene chloride/hexane. The vapor deposited film was polymerized by UV irradiation. Photopolymerization was carried out through a photomask, resulting in a patterned image, where the irradiated part became isotropic.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.57-59
• /
• 1998

The headspace method has been acknowledged as a cost-effective and convenient method to analyze volatile organic compounds(VOCs) in soil. The headspace analysis is based on equilibrium partitioning of VOCs among water, air and soil in a closed system. However, the headspace method cannot be applied to soils where most of the VOCs remain sorbed even at high temperature. In this study, it was investigated how the sorption characteristics of VOCs varied with soil with different organic carbon contents and temperature. This study showed that all the VOCs were volatilized, not sorved, only in the soil with 5% organic carbon at 45$^{\circ}C$ or higher. Some fraction of VOCs remained in soil with 8% organic carbon at $65^{\circ}C$ of higher. Most of the VOCs remained sorbed in soil with 12% organic content even at 95$^{\circ}C$. This result suggested that the headspace method can be applied only to soils with little organic carbon content (less than 5%). In this case, 45$^{\circ}C$ seems to be high enough to volatilize all the VOCs from soil. Large particles still showed a significant sorption capacity for VOCs from soil. Large Particles still showed a significant sorption capacity for VOCs despite of their low level of organic carbon content. It was also shown that the organic carbon sorption coefficients (Koc) of VOCs varied with soils with different organic carbon content. This suggests that not only the organic matter content of soil but also the property of the organic matter in soil influence the sorption of VOCs to soil.

• 청정기술
• /
• 제12권3호
• /
• pp.128-137
• /
• 2006

초임계이산화탄소 내에서 이온성액체의 부피 변화와 상온 이온성액체와 유기화합물의 혼합물이 두 상으로 분리되는 현상을 고압 view cell을 이용하여 측정하였다. 이온성액체(ionic liquid, IL)로는 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$])와 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][$BF_4$])를 사용하였으며, 유기화합물로는 methanol과 dimethyl carbonate를 사용하였다. 일정한 양의 [bmim][$PF_6$]에 대하여 유기화합물의 양을 증가시킴에 따라 상이 나누어지는 지점인 lower critical end point (LCEP) 압력이 감소하였다. 이온성액체의 수분함량이 증가함에 따라 LCEP가 높게 나타났으며, 일정량 이상의 수분이 함유되어 있으면 LCEP가 나타나지 않았다. LCEP는 같은 부피의 [bmim][$PF_6$]에서보다 [bmim][$BF_4$]에서 약 1.0 MPa 정도 높게 나타났으며, K-point는 이온성액체의 종류와 유기화합물의 양에 따라 거의 변화하지 않았다. 초기시료 중 이온성액체([bmim][$PF_6$])의 농도 (IL/(IL+MeOH))가 7.23 mol% 보다 크면 혼합물의 LECP에서 $L_1$의 부피가 $L_2$의 부피보다 크게 나타났으며, 반대로 작으면 작게 나타났다. 이산화탄소의 존재 하에서 이온성액체의 부피변화는 온도가 증가함에 따라 감소하였으며, 313.15 와 343.15 K 사이에서는 압력이 증가함에 따라 증가하여 300 bar에서는 원래 부피의 123~126 %가 되었다.

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2011년도 춘계학술발표회
• /
• pp.288-289
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1395-1398
• /
• 2011

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2007년도 추계학술대회 논문집
• /
• pp.380-381
• /
• 2007

• Archives of Pharmacal Research
• /
• 제8권4호
• /
• pp.191-195
• /
• 1985

The polymerization of title compound (MCEC, I) with phenols led to give corresponding resole type polymer. Phenol and p-methoxyphenol polymer had a relative higher molecular weight and a property of elastomer, but p-chloro-and p-nitrophenol polymer had a lower ones. Also, phenol and p-meth-oxyphenol gave to crosslinking polymer by elongation of reaction period and rising of temperature.

• 약학회지
• /
• 제39권5호
• /
• pp.511-515
• /
• 1995

N-4-salicyloamide-2-ainino-6-piperidinopyrimidine 3-oxide(SALMI) was synthesized by condensation of chloride compound of salicylic acid with minoxidil in organic solvent, and was identified by MS, UV and IR etc.

• 한국잠사곤충학회지
• /
• 제18권1호
• /
• pp.27-39
• /
• 1976

복합견방사 및 복합견직물을 시작하여 다음의 결과를 얻었다. 1 정연제별 처리효과는 규산소다, 가성소다, 탄산소 및 비누의 순이다. 2. 가성소다 3% 액으로 정연할 경우는 견담백질의 과잉 용해로 진면제조가 불가하다. 3. 견의 정연효과는 처리시간보다 농도가 크다. 4. 정연제의 단독사용보다는 이중이상을 혼용하는 것이 진면품질을 향상시킬 수 있다. 5. 견수방사의 명주소리와 광택향상을 위하여서는 유기산의 혼용이 요구된다. 6. 심사에 의하여 복합수방사의 강도는 증가한다. 7. 복합수방사의 성도변동율은 8∼l2%이다. 8. 견과 데도롱직의 염색은 이욕법으로 처리하여야 한다. 9. 복합수방사 견직물의 수축율은 23%이다. 10. 복합수방사직물은 여자용 동복지로 복합생사 직물은 부라우스지로 사용 가능하다.