• Title/Summary/Keyword: organic adhesive

Search Result 121, Processing Time 0.028 seconds

A Study on the Estimation of Adhesive Stability of Organic.Inorganic Mixed Tile Bond to Ondol-Heating Floor System (온돌난방 바닥에 적용하기 위한 유기.무기질 혼합계 타일접착제 종류에 따른 부착 안정성 평가연구)

  • Jung, Yang-Hee;Jung, Eun-Hye;Seo, Sin-Seok;Jeong, Jae-Soo;Kim, Ook-Jong;Lee, Do-Bum
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2009.05c
    • /
    • pp.99-102
    • /
    • 2009
  • This paper is to present the performance data for pressure setting method using some tile bonds for application on the Ondol-Heating floor system. For this purpose, powder and liquid tile bonds(Organic.Inorganic mixed tile bonds) were compared with the conventional tile cement for pressure setting method in the sight of the adhesive stability of porcelain tile. It tested for tiles after 14, 28days under standard condition and severe conditions. The severe conditions were water immersion and heat ageing($70^{\circ}C$). Another experimental factors concerned tile bond properties such as mixing ratio(in case of using liquid admixture), open time, which are supposed to affect the tensile strength of tile, were studied and discussed through the experiments.

  • PDF

The Development of UV Blocking Type Pressure-Sensitive Adhesive Sheet for Window (자외선이 차단되는 창문용 점착시트 개발에 관한 연구)

  • Kim, Sung-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.1
    • /
    • pp.559-564
    • /
    • 2011
  • The UV blocking type pressure-sensitive adhesive sheet was developed by mixing UV blocking reagent with adhesive material, instead of conventional method in which the reagent was mixed with PVC substrate. The blocking performance of the sheet was evaluated by measuring the absorbance in 280-400 nm region. Both organic and inorganic type blocking reagents were examined. The blocking ability of the former is better than that of the later. Only 1% addition of blocking reagents is effective to block UV light without affecting to visibility and tackiness of adhesive tapes.

One-step Fabrication of a Tannic Acid-Transition Metal-Polymer Gel as a Pressure-Sensitive Adhesive (타닌산-전이 금속-고분자로 구성된 젤의 단일 단계 합성과 점착제로의 이용)

  • Lee, Jaehong;Lee, Kyoungmun;Choi, Siyoung Q.
    • Korean Chemical Engineering Research
    • /
    • v.58 no.2
    • /
    • pp.176-183
    • /
    • 2020
  • In this study, synthesis of a hydrogel consisted of a coordination bond network between small organic molecules and transition metals had been carried out. By adding a tackifying material to the gel, the potential of the gel to be used as an adhesive material had been also confirmed. Synthesis of the adhesive had been done with simple mixing of 3 components: tannic acid, transition metal, and polymer. The tannic acid molecule possesses multiple hydroxyl groups that can form coordination bonds with the transition metals and hydrogen bonds with the hydrophilic polymers. Due to the morphology of the metal-organic complex and polymer dispersed in water, the fabricated material exhibited high adhesiveness and cohesiveness. Optimizing the rheological property had been conducted for use in adhesive by the synthesis with varying the transition metal (Fe3+, Ti4+), polymer, and treatment conditions. Rheological measurement results demonstrate the promising potential of the material as a bio-compatible and versatile pressure-sensitive adhesive with both high adhesiveness and cohesiveness.

Constituent Analysis of Organic Solvents in Adhesives Sold on Domestic Market (국내시판 본드에 함유된 유기용매의 성분분석)

  • Kim, Dai-Byung;Lee, Jong-Kwon;Jung, Kyong-Ja;Yoon, Yeo-Pyo;Kim, Myung-Soo
    • Toxicological Research
    • /
    • v.14 no.3
    • /
    • pp.329-332
    • /
    • 1998
  • Ingredients and concentrations of organic solvents in 7 kinds of adhesive sold on the domestic market were qualitatively and quantitatively analysed. Vapor concentrations were also analysed to estimate inhalation concentratins when adhesives were abused to get high. Acetone, methyl ethyl ketone, methyl cyclopenatane, cyclohexane and toluene were identified to be used in domstic adhesives as solvents. When organic solvents of adhesives were vaporized in the vial at the room temprature for 30 mins, concentrations of organic solvents in air were in the range of 5,000~140,000ppm. Among these solvents, toluene, known to have strong hallucination effect, showed 5,000~35,000 ppm. The putative concentration of toluene in case of glue sniffing was estimated to be about 5,000ppm in consideration of glue sniffing circumstances. Toluene was found in all adhesives in this study, even adhesives which toluene was not described in label.

  • PDF

Analysis of characteristics of natural resins using organic residue analysis organic materials attached on wooden coffins from Singok-dong Site, Uijeongbu (유기잔존물 분석을 활용한 천연 수지 특성 분석 - 의정부 신곡동 유적 출토 목관 부착 유기물을 중심으로 -)

  • YUN, Eunyoung
    • Korean Journal of Heritage: History & Science
    • /
    • v.54 no.4
    • /
    • pp.78-89
    • /
    • 2021
  • Organic residues analysis is an analysis method that reveals the types of organic material samples by using the characteristic that main components constituting substances are different depending on the species of animals and plants. In this study, scientific analysis of the organic residues attached to wood coffins in the Joseon Dynasty Hoemyo excavated from the site of Singok-dong, Uijeongbu was used to identify the types of remnants and to use them as information to restore the uses of organic materials and the way they lived in the past. As a result of FT-IR analysis of the residue attached to the inside of the wood, it was estimated to be a natural plant resin material. In addition, as a result of analysis by GC-MS to confirm the characteristic factors of natural resins, diterpenoids (abietane) and pimaran (pimarane), such as dehydroabietic acid and pimaric acid (diterpenoid) compounds, and saturated and unsaturated fatty acid components were detected together. Diterpenoid compounds are components mainly found in Pinaceae resins. It is confirmed in the literature that rosin, a representative material of Pinaceae resin, was used as an adhesive material. Considering the situation where an organic material remained at the joint of the wood, the organic material attached to the wood is judged to be an adhesive material made of Pinaceae resin. In addition, the fatty acid component detected together is a component derived from plant oil, and it is presumed to be made by mixing rosin and oil as recorded in previous studies. This study confirms that organic residues remain in the burial environment without losing their characteristics. It is expected that scientific analysis of organic residues will be conducted in the future to accumulate information necessary for the interpretation of past living culture.

Evaluation of Anti-Sapstain Activity of Rice Powder Adhesives Modified with Wood Preservatives

  • Lee, Min;Kang, Eun-Chang;Lee, Sang-Min
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.6
    • /
    • pp.872-879
    • /
    • 2016
  • Demand of natural interior finishing material has been widely sprayed in nowadays because many weak people as children, pregnant women, and elder people are being struggled with sick house syndrome due to volatile organic compounds such as formaldehyde, toluene, benzene, etc. Our research group developed a no-added formaldehyde adhesive for wood-based panels from mainly rice powder and some additives in the previous study for abating sick house syndrome. Since the rice powder adhesive provides a good source of nutrients with microorganisms, it was suspected a susceptibility of the rice powder adhesive to fungal and sapstain attack. We evaluated anti-sapstain activity of the rice powder adhesives modified by adding wood preservatives. We modified the rice powder adhesive by adding three different types of anti-sapstain preservatives at three different concentrations to assess their anti-sapstin activity. The bonding strengths of the modified rice powder adhesives were still outstanding performance on all samples. Moreover, the plywood manufactured with the modified rice powder adhesive satisfied outdoor use requirement for ordinary plywood (KS F3101, Korean Standard). The results obtained showed that at least 3% of preservative should be added to the rice powder adhesive to obtain effective anti-sapstain activity.

Interfacial Adhesion Properties of Surface Treated Polyarylate Fiber with Polyethylene Naphthalate (폴리아릴레이트 섬유의 표면처리에 의한 폴리에틸렌 나프탈레이트 수지와의 계면접착특성)

  • Yong, Da Kyung;Choi, Han Na;Yang, Ji Woo;Lee, Seung Goo
    • Journal of Adhesion and Interface
    • /
    • v.13 no.1
    • /
    • pp.24-30
    • /
    • 2012
  • Morphological changes of polyarylate (PAR) fiber treated with formic acid and ultraviolet (UV) were observed by using a scanning electron microscope (SEM) and an atomic force microscope (AFM). The results were analysed by using root mean square (RMS) roughness. In addition, the chemical changes of surface was investigated using contact angle and the interfacial adhesive strength between PAR fiber and PEN (Polyethylene naphthalate) matrix was calculated using the Pull-out test results. As the acid treatment concentration and UV irradiation time increased, cracks and pores were produced on the PAR fiber surface. Due to the roughness increased, the contact angle was decreased. For this reason, RMS roughness of PAR fiber was increased and the interfacial adhesive strength between the PAR fiber and PEN matrix was improved. The increase of interfacial adhesive strength was responsible for the increase of surface area which have cracks and pores.

Effect of Post-Heat Treatment on Field Emission Properties for Carbon Nanotube Cathodes (탄소나노튜브 캐소드의 전계방출 특성에 미치는 재열처리의 영향)

  • Ha, Sang-Hoon;Kwon, Na-Hyun;Song, Pung-Keun;Chang, Jiho;Cho, Young-Rae
    • Korean Journal of Metals and Materials
    • /
    • v.48 no.2
    • /
    • pp.180-186
    • /
    • 2010
  • For the application of field emission display (FED), it is essential to develop a carbon nanotube (CNT) cathode with high emission current density. In this study, we developed and demonstrated a post-heat treatment (PHT) process to improve field emission properties of CNT cathodes. Since the PHT is intended to burn out organic materials covering the CNTs, the PHT was carried out by heating samples at a high temperature in an atmosphere. The PHT process is applied for samples processed by surface treatment with an adhesive tape. Compared to samples prior to the PHT, samples after the PHT at $360^{\circ}C$ showed about 17% improvement in emission current density. The major reason for the increased current density is mainly the increased aspect ratio of the CNTs because of the removal of the adhesive organic residues covering the CNTs, which were attached on the CNT surfaces during the surface treatment using the adhesive taping method.

All-Organic Nanowire Field-Effect Transistors and Complementary Inverters Fabricated by Direct Printing

  • Park, Gyeong-Seon;Seong, Myeong-Mo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.632-632
    • /
    • 2013
  • We generated single-crystal organic nanowire arrays using a direct printing method (liquidbridge- mediated nanotransfer molding) that enables the simultaneous synthesis, alignment and patterning of nanowires from molecular ink solutions. Using this method, single-crystal organic nanowires can easily be synthesized by self-assembly and crystallization of organic molecules within the nanoscale channels of molds, and these nanowires can then be directly transferred to specific positions on substrates to generate nanowire arrays by a direct printing process. The position of the nanowires on complex structures is easy to adjust, because the mold is movable on the substrates before the polar liquid layer, which acts as an adhesive lubricant, is dried. Repeated application of the direct printing process can be used to produce organic nanowire-integrated electronics with twoor three-dimensional complex structures on large-area flexible substrates. This efficient manufacturing method is used to fabricate all-organic nanowire field-effect transistors that are integrated into device arrays and inverters on flexible plastic substrates.

  • PDF