• Animal Bioscience
• /
• v.34 no.4
• /
• pp.613-620
• /
• 2021

Objective: This study aimed at studying the potential use of Flemingia (Flemingia macrophylla) as a protein source fodder to improve nutrients digestibility and ruminal fermentation efficiency in beef cattle. Methods: Four, Thai native beef cattle were randomly assigned in a 4×4 Latin square design. Four levels of Flemingia hay meal (FHM) were used to replace soybean meal (SBM) in the concentrate mixtures in four dietary treatments replacing levels at 0%, 30%, 60%, and 100% of SBM. Results: The experimental findings revealed that replacements did not effect on intake of rice straw, concentrate and total dry matter (DM) intake (p>0.05). However, the apparent digestibilities of DM, organic matter, crude protein, acid detergent fiber, and neutral detergent fiber were linearly increased up to 100% replacement levels. Moreover, the production of total volatile fatty acids, and propionate concentration were enhanced (p<0.05) whereas the concentration of acetate was reduced in all replacement groups. Consequently, the CH4 production was significantly lower when increasing levels of FHM for SBM (p<0.05). Furthermore, rumen bacterial population was additionally increased (p<0.05) while protozoal population was clearly decreased (p<0.05) in all replacement groups up to 100%. In addition, microbial nitrogen supply and efficiency of microbial nitrogen synthesis were enhanced (p<0.05), as affected by FHM replacements. Conclusion: The findings under this experiment suggest that 100% FHM replacement in concentrate mixture enhanced rumen fermentation efficiency, nutrients digestibilities, bacterial population, microbial protein synthesis, and subsequently reduced CH4 production in beef cattle fed on rice straw.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2021-2026
• /
• 2009

Toluene, xylene and styrene are volatile organic solvents that are commonly used in mixtures in many industries. Because these solvents are metabolized and then excreted in urine, their urinary metabolites are thought to be biomarkers of occupational exposure to these solvents. Therefore, a simple, rapid, and yet reliable analytical method for determining the metabolites is required for accurate biological monitoring. In the present study, a simple and rapid HPLC-UV method was developed for the simultaneous determination of eight major metabolites of toluene, xylene and styrene: hippuric acid (HA), mandelic acid (MA), o-, m- and p-methylhippuric acids (o-, m- and p-MHAs), and o-, m- and p-cresols. A monolithic column was employed as the stationary phase and several conditions, including flow rate, composition of mobile phase and column temperature, were variables for the optimization of the chromatographic resolution. All eight metabolites were successfully resolved within 5 minutes in 10% aqueous ethanol containing 0.3% acetic acid and 1.6% $\beta$-cyclodextrin, using a flow rate gradient of 1.0 - 5.0 mL/min at 25 ${^{\circ}C}$. The performance of this method was validated by linearity, intra- and inter-day accuracy, and precision. The linearity was observed with correlation coefficients of 0.9998 for HA, 0.9999 for MA, 0.9989 for o-MHA, 0.9998 for m-MHA, 0.9991 for p-MHA, 0.9997 for o-cresol, 0.9998 for m-cresol, and 0.9986 for p-cresol. The intra- and inter-day precision of the method were less than 5.89% (CV) and the accuracy ranged from 92.95 to 106.62%. The validity was further confirmed by analysis of reference samples that were prepared by the inter-laboratory quality assurance program of the Korea Occupational Safety and Health Agency (KOSHA, Seoul, Korea). All measured concentrations of the analytes agreed with the certified values.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.486-492
• /
• 2009

Wet oxidations (WO) of quinoline in aqueous solution were carried out at $225^{\circ}C$ and $250^{\circ}C$. In the WO at $250^{\circ}C$, quinoline was degraded completely within 30 min and the reduction in total organic carbon (TOC) of 63% was achieved during 120 min. However, the rate of the reduction in TOC was only 13% within 240 min during the WO at $225^{\circ}C$. Nicotinic and acetic acid were found to be main intermediates formed during the oxidation of quinoline. With the addition of the homogeneous catalyst $CuSO_4$ or more easily oxidizable phenol, WOs of quinoline were also carried out under moderate conditions at $200^{\circ}C$. The catalytic WO with $CuSO_4$ of 0.20 g/L showed the destruction rates of quinoline and TOC comparable to those in the WO at $250^{\circ}C$. The WOs of quinoline-phenol mixture exhibited induction periods to degrade quinoline and phenol during which free radicals were produced to initiate WOs. With increasing initial concentrations of phenol at a given initial concentration of quinoline, the induction periods in the destructions of quinoline and phenol became shorter and the reduction in TOC increased from 60% to 75% during 180 min of the WOs. The reduction rate of an induction period decreased as increasing the initial concentration ratio of phenol to quinoline. On the other hand, phenol degradation in the WOs of quinoline-phenol mixtures required a longer induction period and proceeded slower compared to the case of the WO of phenol.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.523-530
• /
• 1999

Acrylic pressure-sensitive adhesive has been made utilizing organic solvents, but nowadays it is made by solvent-free system due to environmental problems. In this study, emulsion polymerization were carried out at $40^{\circ}C$ with methacrylic acid(MAA), n-butyl acrylate(n-BA) and 2-ethylhexyl acrylate(2-EHA) as monomers in the presence of anionic(sodium dodecyl sulfate, SDS) and nonionic(ethylene oxide types) surfactant mixtures. The overall conversion of the polymerization reaction in a mixed surfactant system was found to be higher than that in a single surfactant system. Emulsion stability in mixed or anionic surfactant systems was found to be over 12 week, which was better than that in nonionic surfactant system. Emulsion particle size decreased as surfactant content increased. The Tg and molecular weight of emulsion polymer were inependent of the type, the amount and the mixing ratio of surfactant. Based on the results of stability and peel strength, the optimum nonionic surfactant ratio in total 4 g of surfactant mixture systems is found to be 40~60% by weight where the nonionic surfactant has 50 ethylene oxide groups and 16~18 carbon atoms in hydrophobic alkyl chain.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.31-37
• /
• 2013

Lowering surface reflectance of Si wafers by texturization is one of the most important processes for improving the efficiency of Si solar cells. This paper presents the results on the effect of texturing using acidic solution mixtures containing the catalytic agents to moderate etching rates on the surface morphology of mc-Si wafer as well as on the performance parameters of solar cell. It was found that the treatment of contaminated crystalline silicon wafer with $HNO_3-H_2O_2-H_2O$ solution before the texturing helps the removal of organic contaminants due to its oxidizing properties and thereby allows the formation of nucleation centers for texturing. This treatment combined with the use of a catalytic agent such as phosphoric acid improved the effects of the texturing effects. This reduced the reflectance of the surface, thereby increased the short circuit current and the conversion efficiency of the solar cell. Employing this technique, we were able to fabricate mc-Si solar cell of 16.4% conversion efficiency with anti-reflective (AR) coating of silicon nitride film using plasma-enhanced chemical vapor deposition (PECVD) and Si wafers can be texturized in a short time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.761-773
• /
• 2000

Eighteen growing male Murrah buffalo (Bubalus bubalis) calves were divided into three groups consisting of six animals each and fed three urea ammoniated wheat straw (UAS) -based rations supplemented with concentrate mixtures (roughage: concentrate ratio 58:42) containing deoiled ground nut cake, GNC (8%), formaldehyde treated GNC (8%) or fish meal (8%) to undertake comparative evaluation of these rations in terms of their $CH_4$ production and growth (285 d duration) potential. A digestibility trial (10 d duration) was followed by a comparative calorimetric study in respiration chamber. Dry matter (DM) intake (84.3 to $89.3g/kg\;W^{0.75}d^{-1}$) did not differ between treatments. The digestibility coefficient of DM, organic matter (OM), crude protein (CP), neutral and acid detergent fiber did not differ significantly in different diets. Urinary energy loss as a percent of gross energy (GE) was not affected by diets. Average values of $CH_4$ production were 84.3, 77.6 and 99.1 g/d and $CH_4$ energy losses as percent of gross energy were 5.7, 5.2 and 6.1 percent on .GNC, formaldehyde treated GNC and fishmeal, respectively, and did not differ significantly. When expressed per unit of digestible OM intake, $CH_4$ production (g) was lower (p<0.05) on formaldehyde treated GNC (30.6) than on untreated GNC (30.6) and fish meal (31.9). Total ME intake and heat production were similar and hence the energy balances on different diets were similar. Nutritive value of rations in terms of digestible CP and ME were similar. Average daily gain calculated on the basis of regression of fortnights on cumulative liveweight gain in calves fed on concentrate containing unprotected GNC, protected GNC and fish meal were 437.1, 483.9 and 481.6 g, respectively. This indicated that the intake of energy was sufficient to meet the requirement of calves growing at 400 g per d. However, CP intake was around 150% of the stipulated standard (Kearl, 1982). Feed conversion ratios on unprotected GNC, protected GNC and fish meal were 11.60, 11.10 and 10.4 respectively. It was concluded that because significantly (p<0.05) low $CH_4$ is produced on protected GNC (8%), it is very good and sustainable protein source in comparison to poor quality fish meal and untreated GNC to be used in concentrate mixture for supplementing UAS-based diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1278-1284
• /
• 2000

An experiment was performed to evaluate different methods for preserving shrimp by-products and to determine their chemical composition. In the first experiment three ratios of shrimp by-product (SBP) to molasses (6:1, 4:1 and 3:1, wet weight), and to cassava root meal (3:1, 2:1 and 1:1, wet weight of shrimp by-product and air-dry weight of cassava root meal) were investigated. The pH of the SBP ensiled with molasses at a ratio of 3:1, and with cassava root meal at a ratio of 1:1, decreased during the first week to below 4.5 and remained low up to day 56 of ensiling, whereas the pH of the mixtures with higher ratios of SBP remained above 7.0, and the material deteriorated rapidly. The dry matter decreased initially in all treatments but then increased slightly from day 28 in the treatment where shrimp by-product was ensiled with cassava root meal at a ratio of 1:1. The crude protein (CP) and ammonia-N $(NH_3-N)$ contents of the preserved shrimp by-product material ensiled with molasses at a ratio of 3:1 increased significantly one week after ensiling. The CP content then remained constant, while the $NH_3-N$ concentration continued to increase up to 56 days after ensiling. When SBP was ensiled with cassava root meal at a ratio of 1:1 the CP content of the silage increased significantly up to 21 days after ensiling and then decreased back to the original level after 56 days, whereas $NH_3-N$ increased markedly up to 14 days and then remained fairly constant up to 56 days. However, the $NH_3-N$ content was significantly higher when SBP was ensiled with cassava root meal than with molasses. A balance experiment was carried out, arranged as a double Latin-square and including 6 F1 (Large White ${\times}$ Mong Cai) castrates fed randomly one of three diets based on cassava root meal, rice bran, and fish meal (FM) or shrimp by-product ensiled with molasses (SBEMO) or with cassava root meal (SBECA) as the main protein source. Apparent organic matter and CP digestibilities were significantly (p<0.001) higher for the fish meal diet than for the two shrimp by-product diets, although CP digestibility in SBEMO and SBECA was similar (p>0.05). N-retention was significantly higher for the fish meal diet than for the SBEMO diet, which in turn was significantly higher than for the SBECA diet (p<0.01). It can be concluded that shrimp by-product can be preserved by ensiling with molasses at a ratio of 3:1 or with cassava root meal at a ratio of 1:1. Nutrient digestibility and N-retention of diets based on these shrimp by-product silages were lower than for similar diets based on fish meal, probably due to their high chitin content and inferior amino acid balance.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.366-370
• /
• 2005

Pervaporation process using a NaY zeolite membrane was applied for separation of water generated in an esterification process as a byproduct. From the binary mixture of water and either ethyl acetate or acetic acid and the ternary mixture of water, ethanol and ethyl acetate which might be present in an esterification reaction for manufacturing ethyl acetate, water was separated by the membrane pervaporation. It was investigated how the operating parameters such as an organic concentration and a temperature affected the permeate flux and the separation factor of water. For the feed mixture of water/ethyl acetate, the total flux and the separation factor of water were observed to be $930-5,000g/m^2/hr$ and 3,700-8,000, respectively. Also it was found for ternary mixtures of water/ethanol/ethyl acetate that the total flux was $1,300-3,900g/m^2/hr$ and the separation factor was 530-1,600. A pervaporation process might be applied in an esterification process since both the total flux and the separation factor of water through the NaY zeolite membrane were shown to be very high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1572-1578
• /
• 2007

The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.