• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.151-160
• /
• 2002

The purpose of this study was to evaluate the influence of sprue joint form on castability in dental prosthetics. The researcher carried out experimental study according to the type was divided by sprue joint form. Therefore type A was made thicken than sprue diameter of type B and type C was made it conversely. The results were as follows: 1. In the order of castability, type C(87.8%) was first and then type A(87.0%) and type B(79.2%) was last. However there was no significant difference statistically. 2. If reservior was located at the correct position and in sufficient size, internal shrinkage porosity in the casting bodies were not generated in the type of all. 3. At the reservoir, internal shrinkage porosity was generated first in type A, followed by type Band type C in the order named. Although it gives no impact on casting body, porosity seems to appear the least when it's produced in the form of type C.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.29-32
• /
• 2002

The mechanical joining process of a sheet metal pair has been developed in order to replace the resistance spot welding process in case that joining of mechanically unweldable materials and coated sheet metals with different thickness are needed. Form-joining or clinching, a kind of mechanical joining process, is defined as joining process of a sheet metal pair by geometric constraint imposed by plastic deformation of workpieces without any additive part. It has been reported that the joining strength by commercial form-joining apparatus is 50∼70 percent of that by resistance spot welding. Therefore, a two-step form-joining process with a secondary punch is proposed. The device is designed to improve the joining strength by increasing the geometric constraint of the deformed shape by combining a primary punch, a secondary punch and a female die. In order to verify the improved joining strength by the designed process, the tensile-shear strength, the peel-tension strength and the asymmetric peel-tension strength are compared with those by the TOX process and resistance spot welding.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.181-187
• /
• 2008

It's difficult for other designer to understand easily, due to existing abstract form-generation method of digital authors like Greg Lynn and Peter D. Eisenman. This study uses IDEF${\emptyset}$ process diagram in order to remodel procedures and elements of this abstract 3d based form-generation method. IDEF${\emptyset}$ process diagram is the method operated prior to a design of digital program. For object-oriented modeling of each form-generation element technology, IDEF${\emptyset}$ process has been modeled. For this sort of IDEF${\emptyset}$ process modeling, digital architectural theory and analysis method has been generalized With them above, this study suggests the 3d-based form-generation IDEF${\emptyset}{\emptyset}$process model for developing digital tool eventually through the object-oriented components and setting up the mutual roles, relation as well. In conclusion, 3d-based form-generation IDEF${\emptyset}$process model, this study suggests, models form generation methods of existing digital authors using IDEF${\emptyset}$ process for developing digital tool in the future.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.124-131
• /
• 2008

This paper presents the analysis of resistance performance and bow waves for the resistance-minimized hull form of small fishing boat by using numerical simulations and model tests. The resistance-minimized hull form is developed from an original hull form which is selected from existing small fisher boats in our country. In order to estimate the resistance performance for the original and the developed hull form, several numerical simulations and model tests are carried out. Marker and Cell(MAC) method and Marker-Density method are adopted to simulate the free-surface bow waves around advancing hull surface. The results of numerical simulations are compared with the model tests in towing tank. The results show that the resistance performance of the resistance-minimized hull form is improved than that of the original hull form. The results of this study will be a good guide to the hull form development of small fishing boats in future.

• 한국멀티미디어학회논문지
• /
• 제10권5호
• /
• pp.687-697
• /
• 2007

자바 바이트코드는 많은 장점을 가지고 있지만, 수행속도가 느리고 프로그램 분석이나 최적화에 적절한 표현이 아니라는 단점이 존재한다. 따라서 네트워크와 같은 실행 환경에서 효율적으로 수행되기 위해서는 최적화된 코드로 변환이 필요하다. 따라서 우리는 최적화된 코드로의 변환을 위해 CTOC를 구현하였다. 최적화 과정에서 CTOC는 정적으로 값과 타입을 결정하기 위해 변수를 배정에 따라 분리하는 SSA From을 사용하였다. 하지만 SSA Form변환 과정에서 ${\phi}$-함수의 추가에 의해 오히려 노드의 수가 증가되는 문제점이 발생하였다. 이를 해결하기 위해 본 논문에서는 SSA Form에서 복사 전파와 죽은 코드 제거 최적화를 수행한다. 또한 기존의 SSA Form은 표현식보다는 주로 변수에 관련된 것이라는 단점이 존재한다. 따라서 본 논문에서는 SSA Form 형태의 표현식에 대해 복사 전파와 죽은 코드 제거와 같은 최적화를 적용한 후 다시 중복된 표현식을 제거하는 과정을 추가로 수행한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.21-22
• /
• 2023

In order to manufacture high-quality free-form concrete panel (FCP), it is necessary to analyze the limitations of free-form silicone mold (FSM) and conduct technology development research. Currently, the FSM used in FCP manufacture is classified into a side silicon mold(SSM) and a lower silicon mold(LSM). In this study, the limitations of each silicon mold were analyzed and solutions were proposed. In the case of side silicon mold, there is a limit to cannot supporting the side pressure of concrete. Therefore, a mold stacking method was proposed, and at the same time, a process of correcting the movement value of the rod was proposed. In the case of the lower silicon mold, there is a limit to completely implementing the design shape. Therefore, a real-time scanning method and a process of displaying FCP shape coordinates were proposed. The results of this study are expected to be used as basic data for manufacturing high-quality FCP.

• 충청수학회지
• /
• 제27권1호
• /
• pp.17-27
• /
• 2014

In order to study the propagation of singularities for solutions to second order quasilinear strictly hyperbolic equations with boundary, we have to consider the regularity of solutions of first order nonlinear equations satisfied by a characteristic hyper-surface. In this paper, we study the regularity compositions of the form v(${\varphi}$(x), x) with v and ${\varphi}$ assumed to have limited Sobolev regularities and we use it to prove the regularity of solutions of the first order nonlinear equations.

• 호남수학학술지
• /
• 제39권4호
• /
• pp.465-473
• /
• 2017

In this paper, we define a totally umbilic hypersurface of first order and show that a totally umbilic hypersurface of first order in an Einstein manifold has a parallel second fundamental form. Furthermore we prove that a complete, simply connected and totally umbilic hypersurface of first order in a space of constant curvature is a Riemannian product of Einstein manifolds. Finally we show a proper example which is a totally umbilic hypersurface of first order but not a totally umbilic hypersurface.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.116-121
• /
• 2013

Zinc crystal glaze has its limits in practical use of commercial glaze due to the controlling crystal. In order to overcome this limit, and to heighten the practical usage, this study is aimed to develop artificially controlling willemite ($Zn_2SiO_4$) zinc crystalline glaze. For this purpose, it has experimented with the effect of anatase form and rutile form using $TiO_2$ known as nucleating agent. In zinc glaze, adding $TiO_2$ resulted with anatase form becoming more effective at nucleating formation and growth of willemite than the rutile form. Furthermore, it turned out that using the $TiO_2$ - anatase form, with synthetic seeds (zinc silicate), the numbers and positions of crystals can be controlled artificially.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.75-82
• /
• 2001

The continuous chip in turning operation deteriorates the precision of workpiece and can cause a hazardous condition to operator. Thus the chip form becomes a very important task for reliable turning process. The chip form is identified using the neural network of supervise data Through the measurement of energy radiated from the chip. The feed mechanism os adjusted in order to break continuous chip according to the result of the chip form recognition and it shows a good approach for precision turning operation.