• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.50-57
• /
• 1994

The analysis of the two-tone intermodulation distortion of multistage two-ports with gain and mismatching losses is presented with simplified two-port analyses and statistical viewpoint. The uncertainty obtained from unknown phase angles of the intermodulation distortion signals to the system designer is reduced using stochastic process, hence improving the accuracy of the solution. Based on the dc power dependance of third-order intercept point of each stage, the new efficient method for improving the total intercept point is also suggested with only the relation of dc power and available power gain criteria. Experimental verification on specific amplifiers used for cellular mobile communication comparing predicted and measured intercept points for various power conditions is presented.

• ETRI Journal
• /
• 제38권2호
• /
• pp.227-234
• /
• 2016

Herein, we demonstrate clipping distortion suppression of directly modulated multi-IF-over-fiber links using a simple shunt diode predistorter. The dynamic range of a directly modulated analog fiber optic link is limited by nonlinear distortions caused by laser-diode clipping. We investigate the link performance in the context of carrie-to-noise and distortion ratio (CNDR) and error vector magnitude (EVM) requirements when supporting LTE-A services. We also design an analog predistorter with a shunt-diode structure, and demonstrate experimentally that the predistorter has the ability to suppress clipping-induced third-order intermodulation distortions of the link by at most 14 dB. It also improves the CNDR and EVM of the 4-IF-multiplexed LTE-A carriers by 7 dB and 2.9%, respectively.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.712-718
• /
• 2013

This paper proposes a control method for reducing the total harmonic distortion (THD) of the grid current of three-phase grid-connected inverter systems when the grid voltage is distorted. The THD of the grid current caused by grid voltage harmonics is derived by considering the phase delay and magnitude attenuation due to the hardware low-pass filter (LPF). The Cauchy-Schwarz inequality theory is used in order to search more easily for the minimum point of the THD. Both the gain and angle of the compensation voltage at the minimum point of the THD of the grid current are derived with the variation of cut-off frequencies of the hardware LPF. Simulation and experimental results show the validity of the proposed control methods.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.126-131
• /
• 1998

In computer vision system of modern industry precise measuring has lots of dfficulties because of measurement error due to distortion phenomenon. Among the difficulties, the distortion of edge is regraded as a dominent problem. which is caused by the vlurred image. The blurred image apperar when camera can not discriminate its precise focus. So. it is very important to decide focus of lens and to develop algorithm in order to correct distortion phenomenon. Thus. discrimination criteria obtained by image information of precise focus must be fixed in advance. The gray level histogram of image acquired from blurred edge tends to show a uniform distribution. Bimodal intensity histogram is related with condition of focus, and it is possible to find good condition of focus by using bimodal histogram of entropy.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1515-1522
• /
• 1997

Several image coding algorithms have been developed for the telecommunication and multimedia systems with high image quality and high compression ratio. In order to achieve low entropy and distortion, the system should pay great cost of computation time and memory. In this paper, the uniform cubic lattice is chosen for Lattice Vector Quantization (LVQ) because of its generic simplicity. As a transform coding, the Discrete Wavelet Transform (DWT) is applied to the images because of its multiresolution property. The proposed algorithm is basically composed of the biorthogonal DWT and the uniform cubic LVQ. The multiresolution property of the DWT is actively used to optimize the entropy and the distortion on the basis of the distortion-rate function. The vector codebooks are also designed to be optimal at each subimage which is analyzed by the biorthogonal DWT. For compression efficiency, the vector codebook has different dimension depending on the variance of subimage. The simulation results show that the performance of the proposed coding mdthod is superior to the others in terms of the computation complexity and the PSNR in the range of entropy below 0.25 bpp.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.300-306
• /
• 2012

An image attention model and its application to image quality assessment are discussed in this paper. The attention model is based on rarity quantification, which is related to self-information to attract the attention in an image. It is relatively simpler than the others but results in taking more consideration of global contrasts between a pixel and the whole image. The visual attention model is used to develop a local distortion predictor, named color visual differences predictor (CVDP), in color images in order to effectively detect luminance and color distortions.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.218-222
• /
• 2008

RF power amplifier requires linearization in order to reduce adjacent channel interference. And most of the existing linearization algorithms assume that a PA has memory-less nonlinearity. But for the wider bandwidth signal, the memory effect of PA cannot be ignored. This paper investigates digital pre-distortion by use of a memory polynomial model which compensates for amplifier nonlinearity and memory effect. The look-up table based implementation scheme is used to reduce the computational complexity of the pre-distortion block. The linearization performance is demonstrated on wideband CDMA signal and class AB high power amplifier.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.1-9
• /
• 2022

Peeling and dimensional deformation that occur during a manufacturing process are accompanied by an increase in the manufacturing cost and production time caused by manufacturing defects. In order to solve this problem, it is essential to predict risk factors at the design stage through computational analysis of the additive manufacturing process and to control shape distortion due to residual stress. In this study, the dimensional characteristics were improved by applying the distortion compensation design through computational analysis to minimize the distortion occurring in the DMLS(Direct Metal Laser Sintering) method of the metal additive manufacturing process.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.979-981
• /
• 2011

In this paper, a new scheme to improve both the capacity and distortion performance for error-prediction method is proposed. For every triangle mesh, two vertices were selected to predict the rest vertex, and the prediction error distances which were vertical and paralleled to the edge between these two vertices would be used to embed two units of secret date amount. We sort the meshes before embedding according to predicted error in order to decrease the distortion. Experiment results show that our approach increase the capacity and decrease the distortion as compared to the original algorithm.