• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.182-188
• /
• 2018

Objective: This study was performed to validate the autonomous maximal smile (AMS) as a new reference for evaluating dental and gingival exposure. Methods: Digital video clips of 100 volunteers showing posed smiles and AMS at different verbal directives were recorded for evaluation a total of three times at 1-week intervals. Lip-teeth relationship width (LTRW) and buccal corridor width (BCW) were measured. LTRW represented the vertical distance between the inferior border of the upper vermilion and the edge of the maxillary central incisors. Intraclass correlation coefficients (ICCs) for reproducibility, and the m-value (minimum number of repeated measurements required for an ICC level over 0.75), were calculated. Results: LTRW and BCW of the AMS were 1.41 and 2.04 mm, respectively, greater than those of the posed smile (p < 0.05), indicating significantly larger dental and gingival exposure in the AMS. The reproducibility of the AMS (0.74 to 0.77) was excellent, and higher than that of the posed smile (0.62 to 0.65), which had fair-to-good reproducibility. Moreover, the m-value of the AMS (0.88 to 1.05) was lower than that of the posed smile (1.59 to 1.85). Conclusions: Compared to the posed smile, the AMS shows significantly larger LTRW and BCW, with significantly higher reproducibility. The AMS might serve as an adjunctive reference, in addition to the posed smile, in orthodontic and other dentomaxillofacial treatments.

• Journal of Environmental Health Sciences
• /
• v.49 no.4
• /
• pp.210-217
• /
• 2023

Background: N-nitrosamines are carcinogenic substances often found in rubber products. They are produced when certain additives of rubber products react with nitrite in saliva or air. Exposure assessment for the proper management and communication of N-nitrosamines in rubber balloons should be carried out. Objectives: This study was conducted to determine the concentrations of N-nitrosamines in rubber balloons in the South Korean market and assess exposure among Korean children. Methods: Forty eight rubber balloon products in the domestic market were purchased and a total of 68 balloons were analyzed for N-nitrosamines and N-nitrosatable substances. Chemical analysis was conducted by HPLC-MS/MS according to the method EN 71-12. For exposure assessment, an exposure algorithm and coefficients were obtained from previous studies. Results: Among the 68 rubber balloons, N-nitrosamines were detected in 18 (26.5%) with an average level of 60.77 ㎍/kg. N-Nitrosatable substances were detected in 44 products (64.7%) with an average level of 1353.33 ㎍/kg. As a result of the exposure evaluation, the exposure dose differed according to how exposure coefficients were applied. The median exposure (50th percentile) was higher in the age group of 6~12 years, and high exposure (95th percentile) was higher in the age group of 13~18. Conclusions: We evaluated the N-nitrosamines contained in rubber balloons purchased in the domestic market and assessed oral exposure among South Korean children. For integrated risk management of N-nitrosamines, further studies and discussion regarding exposure and risk assessment are required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.332-344
• /
• 1999

Cytokines are hormone-like proteins which mediate and regulate inflammatory and immune responses. Interleukin-6 (IL-6) is involved in the final differentiation of B cells into antibody-producing cells. Interleukin-8 (IL-8) is a neutrophil chemotactic factor that plays an important role in the recruitment of neutrophil to inflammatory loci. Inflammatory mediators by cells in the gingiva have been implicated in the initiation and progression of periodontitis and oral infection. The purpose of this study was conducted to investigate the effect of lipopolysaccharide (LPS), staphylococcus enterotoxin B (SEB) on production of IL-6 and IL-8 by human gingival and facial dermal fibroblasts. Primary cultured human gingival and facial dermal fibroblasts were incubated with LPS (0.01, 0.1, $1.0{\mu}g/ml$), SEB (0.01, 0.1, $1.0{\mu}g/ml$) or LPS $(0.1{\mu}g/ml)$ plus SEB $(0.1{\mu}g/ml)$. Culture supernatants were collected at 24, 48, and 72 hrs and assessed for IL-6 and IL-8 production by enzyme-linked immunosorbent assay. IL-6 production in gingival fibroblasts stimulated with LPS was higher than that with SEB. IL-6 production by double exposure with LPS plus SEB was amplified in comparison with single exposure of LPS or SEB. IL-6 production in facial dermal fibroblasts was increased only by stimulation with a high concentration of LPS $(1.0{\mu}g/ml)$. Its production in facial dermal fibroblasts by exposure with SEB was decreased in comparison with control, nontreated cells. Therefore, gingival fibroblasts showed higher sensitivity than facial dermal fibroblasts in response to low concentration of LPS. Also, IL-6 production by double exposure with LPS plus SEB was amplified in comparison with single exposure of LPS or SEB. IL-8 production in gingival fibroblasts was enhanced greatly only by stimulation of high concentration of LPS $(1.0{\mu}g/ml)$. That by exposure with SEB was increased only in 24 hrs cultivation. IL-8 production by double exposure with LPS plus SEB was amplified in comparison with single exposure of LPS or SEB. IL-8 production in facial dermal fibroblasts was decreased by LPS and increased only in 48 hrs cultivation by SEB. IL-8 production by double exposure with LPS plus SEB was enhanced only in 48 hrs cultivation in comparison with single exposure of LPS or SEB. therefore, IL-6 and IL-8 production were released at various quantities according to bacterial toxin applied and site of fibroblast harvested. These results suggest that gingival fibroblasts may be concerned with IL-6 and IL-8 related inflammatory response more than facial dermal fibroblasts.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.111-124
• /
• 2009

This study analyzes through the review of literature and laws the exposure time, clinical frequency, and radiation exposure of intraoral and extraoral radiography as well as of panoramic radiography performed by dental hygienists in dental clinics, compares the dental radiology curriculums of radiological science and dental hygiene departments, and proposes the expansion of dental hygienists' radiography operations. The radiology curriculums were compared between the radiological science and dental hygiene departments of colleges. For new analysis by radiography for dental diagnosis, the exposure time, radiation absorbed dose, effective dose, and number of days of natural radiation were compared by the type of oral radiation films and radiographical techniques proposed by domestic and international studies. The exposure time of panoramic radiography is 15 seconds and it takes about two minutes for completion, whereas the exposure time of the standard radiography is 0.2~0.8 seconds and it takes 10 times longer for completion of the radiography of full mouth than the panoramic radiography. The standard radiography can cause distortions of radiation at severely curved parts of dental arch and palatopharyngeal reflex. However, panoramic radiography can be performed even for lock jaw patients, causes less inconvenience to patients and is much simpler than the standard radiography. The percentage of dental clinics where radiography is performed by dental hygienists was 92.0%, and the percentage of standard film radiography by dental hygienists was 98% whereas the percentage of panoramic radiography by dental hygienists was 92%. For the absorbed dose which is an indicator of radiation exposure, the When the effective dose which is an indicator of the danger of radiation exposure was converted to the number of days of natural radiation, it was 3.3 days for panoramic radiography, but 13.9 days for the full mouth standard radiography by bisecting angle technique which was 4.2 times longer than the panoramic radiography. There were two colleges that had a dental radiology course with two credits in the departments of radiological science. The credits for dental radiology courses in the department of dental hygiene ranged varied by college, ranging from 3 to 8; on average, the theory course was 2.2 credits and the practice course was 2.02 credits. To summarize the above results, the percentage of dental clinics where panoramic radiography is performed by dental hygienists under the guidance of dentists is high. Panoramic radiography has become an essential facility for dental clinics. It is faster than standard film radiography and less dangerous due to low radiation exposure. Panoramic radiography is a simple mechanical job that does not require training of oral radiography by radiotechnologist. Because panoramic radiography is one of major operations which must be performed at all times in dental clinics, it must be designated as intraoral technique rather than extraoral technique, or legalized for inclusion in the scope of operations of dental hygienists.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.117-127
• /
• 1992

This investigation was performed to test the readability of the video based digital radiography, that can be applied clinically, compared with the periapical radiograph. The experiments were performed with IBM-PC/AT compatible, video camera and ADC (analog-digital converter). And spatial resolution was 512 X 480 with 256 (8 bit) gray levels. The radiographs obtained by using variable steps of exposure time were digitized. and then the digital images were analyzed. The obtained results were as follows: 1. There was no remarkable difference in readability between the radiographs and their digital images. However, under over exposure the digital images were superior to the radiographs in readability and vice versa. 2. As the exposure time was increased, the gray level of the digital image was decreased proportionally. 3. The correlation beween the regions of interest and the aluminum step wedges were relatively close; R=0.9965 (p <0.001).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.3
• /
• pp.233-236
• /
• 2021

A mandibular continuity defect can be repaired using either a prosthetic device or autogenous bone. A titanium reconstruction plate can be used with a localized or vascularized flap over the defect of the mandible. Unfortunately, the plate may fail due to plate exposure, screw loosening, fracture, or infection, and will need to be removed. Plate exposure though the skin or mucosa is one of the main reasons for failure. In the present work, the authors introduced a lingually positioned reconstruction plate fabricated via three-dimensional printed bending support. This custom reconstruction plate can avoid plate re-exposure as well as reduce surgical errors and operation time.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.67-77
• /
• 2002

This study was aimed to determine the urinary metabolite of IBP, one of the organophosphorus pesticides, as the biomarkers of exposure. Urine samples were collected for 24 hours in metabolic cages after oral administration and dermal application of IBP to rats. Identification of the derivatized urinary metabolite was determined by GC/MS and excretion time courses of the urinary metabolite was analyzed by GC/FPD. Urinary metabolite o IBP, diisopropyl phosphorothioate, was detected in rats urine both after oral administration and dermal application of IBP. Parent compound was not detected in the experiment. In GC/MS, the mass spectral confirmation for diisopropyl phosphorothioate ion was identified at m/z 254. Diisopropyl phosphorothioate was excreted within 48 hours and 72 hours after oral administration and dermal application of IBP, respectively. In this study, the same urinary metabolite of IBP was detected both in oral and dermal exposure. Generally, excretion of the urinary metabolite after oral administration was faster than after dermal application. It is suggested that urinary diisopropyl phosphorothioate could be used as the biomarkers of exposure to IBP.

• Imaging Science in Dentistry
• /
• v.39 no.4
• /
• pp.195-198
• /
• 2009

Purpose : To establish reference doses of periapical radiography in Chonnam Province, Korea. Materials and Methods : The target-skin distances were measured for dental patient's 1235 exposures including 345 mandibular molar areas. Each periapical radiation exposure was simulated with exactly the same patients exposure parameters and the simulated radiation doses were measured utilizing Mult-O-Meter (Unfors Instruments, Billadal, Sweden). The measurements were done in 44 dental clinics with 49 dental x-ray sets in Chonnam Province for one or two weeks at each dental clinic during year 2006. Results : The third quartile patient surface doses were 2.8 mGy for overall periapical exposures and 3.2 mGy for periapical mandibular molar exposures. Conclusion : The third quartile patient surface doses in Chonnam Province can be used as a guide to accepted clinical practice to reduce patient radiation exposure for the surveyed reference doses were below the recommended dental periapical radiography dose of 7 mGy by IAEA.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.111-119
• /
• 2018

Purpose: This study was conducted to evaluate the accuracy of linear measurements of 3-dimensional (3D) images generated by cone-beam computed tomography (CBCT) and facial scanning systems, and to assess the effect of scanning parameters, such as CBCT exposure settings, on image quality. Materials and Methods: CBCT and facial scanning images of an anthropomorphic phantom showing 13 soft-tissue anatomical landmarks were used in the study. The distances between the anatomical landmarks on the phantom were measured to obtain a reference for evaluating the accuracy of the 3D facial soft-tissue images. The distances between the 3D image landmarks were measured using a 3D distance measurement tool. The effect of scanning parameters on CBCT image quality was evaluated by visually comparing images acquired under different exposure conditions, but at a constant threshold. Results: Comparison of the repeated direct phantom and image-based measurements revealed good reproducibility. There were no significant differences between the direct phantom and image-based measurements of the CBCT surface volume-rendered images. Five of the 15 measurements of the 3D facial scans were found to be significantly different from their corresponding direct phantom measurements(P<.05). The quality of the CBCT surface volume-rendered images acquired at a constant threshold varied across different exposure conditions. Conclusion: These results proved that existing 3D imaging techniques were satisfactorily accurate for clinical applications, and that optimizing the variables that affected image quality, such as the exposure parameters, was critical for image acquisition.

• Imaging Science in Dentistry
• /
• v.36 no.2
• /
• pp.69-72
• /
• 2006

Purpose : We evaluated the fractal dimension changes on bovine rib radiographs according to the decalcification degree and the exposure time in the bovine rib. Materials and Methods : Twenty 5 mm thick cross-sectional blocks from bovine rib bone were progressively decalcified in 30 mL 0.1 N hydrochloric acid for 5, 30, and 90 minutes. They were radiographed at three exposure time settings (0.22, 0.36, 0.43 mAs) before and after each decalcification stage. We selected $100{\times}100$ pixel-sized regions of interests (ROIs) on trabecular bone and calculated fractal dimensions by box-counting method. Results : Repeated measures ANOVA showed that fractal dimensions gradually decreased after acid-induced demineralization and with more exposure (P<0.001). Conclusion : The fact that fractal dimensions decrease after decalcification might support the hypothesis that patients with osteoporosis have decreased radiographic fractal dimension in trabecular bone in comparison to normal subjects.