• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.11-17
• /
• 2000

저압 유기금속화학기상증착법을 이용하여 효율적인 청색 발광을 하는 InGaN/GaN multiple quantum wells(MQWs)을 성장시키고, InGaN/GaN MQWs의 광학적 및 계면 구조 특성을 고찰하였다. 보다 효율적인 청색 발광을 하는 InGaN/GaN MQWs을 성장시키기 위하여, MQWs의 성장온도 및 InGaN 우물층과 GaN 장벽층의 두께를 변화시켜 최적 조건을 확립하였다. 특히, GaN 장벽층의 두께 변화가 InGaN 우물층과 GaN 장벽층간 계면의 구조적 특성에 지대한 영향을 미침을 확인하였다. X-ray 회절분석결과와 고분해능의 투과전자현미경 사진 분석으로부터 MQW 구조의 InGaN 우물층과 GaN 장벽층간의 계면이 매우 급준함을 발견할 수 있었다. 또한, 상온 PL 스펙트럼에서 72.6meV의 매우 좁은 반치폭을 갖는 단일 피크가 463.5nm에서 확인되었다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2860-2866
• /
• 2020

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2189-2196
• /
• 2009

광파이버 네트웍에서 광전믹싱 광검파의 가용 주파수대역 확장을 위한 이론을 제시하고 시뮬레이션을 실시하였다. 광전믹싱 광검파의 정규화 이득을 정의하고, 검파소자의 차단주파수를 초월하는 고주파 영역의 신호도 검파가 가능함을 확인하였다. 포토다이오드 내부의 캐리어 천이에 대한 연속방정식을 풀어서 광전믹싱 현상의 메카니즘을 해석하였다. 정규화 이득은 신호주파수와 차주파수의 크기에 의존하였으나, 포토다이오드에 흐르는 광전류의 크기는 신호주파수와는 무관하였다. 신호 검파효율의 최대화를 위해서는 바이어스 전압과 국부신호의 진폭을 동시에 최적화할 필요가 있다.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.7-11
• /
• 2017

In this study, multilayered graphene was easily transferred to the target substrate in one step using thermal release tape. The transmittance of the transferred graphene according to the number of layers was measured using a spectrophotometer. The sheet resistance was measured using a four-point probe system. Graphene formed using this transfer method showed almost the same electrical and optical properties as that formed using the conventional poly (methyl methacrylate) transfer method. This method is suitable for the mass production of graphene because of the short process time and easy large-area transfer. In addition, multilayered graphene can be transferred on various substrates without wetting problem using the one-step dry transfer method. In this work, this easy transfer method was used for dielectric substrates such as glass, paper and polyethylene terephthalate, and a sheet resistance of ~240 ohm/sq was obtained with three-layer graphene. By fabricating organic solar cells, we verified the feasibility of using this method for optoelectronic devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2031-2033
• /
• 2004

In this paper, electromagnetic wave environment generated from electronic equipments was investigated. Since the main source of electromagnetic waves are electronic equipments, the field intensity of a harmful electromagnetic wave was measured and its harmful level was analyzed. It was also found that the result was 23%${\sim}$38% in case of TV set and microwave oven. Based on this analysis, this study proposed efficient shielding method to suppress unwanted electromagnetic wave.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.237.2-237.2
• /
• 2011

SAW-ED를 이용하는 박막공정 기술을 통하여 나노레벨의 SWCNT 와 PEDOT의 thin film 및 hybrid화된 film구조를 얻을 수 있었다. SWCNT와 전도성고분자와의 hybridization을 통해 균일상의 표면 morphology를 갖는 고전도성 투명 필름을 제작하고, 이들의 전기광학적 성질을 확인하였다. SAW-ED를 이용하는 박막공정 기술은 나노입자 및 나노구조물의 박막화 패턴화를 포함하는 새로운 deposition 기술로서의 응용성을 가지고 있으며, 본 연구에서는 SWCNT와 전도성고분자를 이용하여 이를 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 광학 및 양자전자학 워크샵
• /
• pp.6-12
• /
• 1990

GaAs 광전집적회로의 구현을 위해 MBE와 MOCVD system을 이용하여 수직 구조에 알맞는 광소자 및 전자소자를 개발하였으며 이 소자들의 집적화를 시도하였다. 발광소자로서는 Bcllcorc와 공동으로 MBE를 이용하여 표면 방출형 레이저 다이오드 및 array 구조의 연구가 시도 되었고 수직형 전자소자로서는 sclcctive MOCVD를 이용하여 W이 매몰된 VFET 구현하였다. VFET 위에 LED를 집적시켜 출력단의 수직 광전집적회로를 제안하고 제작하였으며 수신단 광전집적회로에서는 PIN 다이오드와 VJFET를 집적화한 광전집적회로가 현재 연구중에 있다.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.152-159
• /
• 1996

We have designed and implemented an optoelectronic hardware of binary phase extraction joint transform correlator (BPEJTC) which provides higher peak-to-sidelobe ratio than many other versions of JTC that has been published so far and does not produce correlation peaks due to intra-class association, to construct a multi-target tracking system. The digital processing unit controlling the entire system plays the part of modifying and binarizing the joint transform power spectrum (JTPS) and the optical processing unit is mainly used to take fourier transform operations. Some experimental results conducted by designed system along with its architecture showed the processing rate of 6 frames per second, thereby the potential applicability of the proposed system to real-time multitarget tracking system is given.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.407-412
• /
• 2018

An optimal matching approach is proposed to maximally ensure the output power uniformity of the cascaded encoder in the passive optical network (PON) monitoring system based on a remote coding scheme. The calculation results show that the optimum arrangement can effectively reduce the difference of the total insertion loss in comparison to the random arrangement (i.e., 0.07 dB vs 2.67 dB in the cascaded encoder with 16 output ports). The proposed approach realizes the optimum configuration for the $1{\times}2$ optical splitters used without adding any extra components. The test results of the fabricated cascaded encoder with 32 output ports prove the feasibility of the proposed approach.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.62-62
• /
• 2011

Intramolecular charge transfer (ICT) system has received great attentions due to their promising optoelectronic properties For the efficient ICT of the chromophore, their organic compound mainly consists of strong electron donors (e.g. $NR_2$ or OR groups) and acceptors (e.g. CN or $NO_2$ groups). According to the molecular design and synthesis, the ICT compounds can be extended in many application fields. In this study, we have synthesized ICT compounds having a strong electron acceptor and donor. These novel ICT compounds were easily synthesized by a previously described method with some modifications. Their single crystals were grown and their structures were solved and described in this presentation.