• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.

• Journal of agriculture & life science
• /
• v.51 no.3
• /
• pp.19-27
• /
• 2017

This study was conducted to investigate the optimum transplanting method for increasing the rice yield and quality by early transplanting cultivation in Gyeongnam plain area. This examination used of the transplanting method of planting distance($30{\times}14$ and $30{\times}18cm$) with number of seedlings(3, 5 and 7 plants). In high planting density($30{\times}14cm$), the number of tillers was increased while plant height was decreased as the planting number increases. On the other hand, the plant height and number of tillers were increased as planting number increases in low planting density($30{\times}18cm$). However, the number of grain per panicle was increased while the number of panicle was decreased as the planting number decreases. The number of panicle and the number of grain per panicle was increased as the planting distance increase. The yield of rice, when transplanted in the distance of $30{\times}14cm$ with 3 plants, was higher than the other treatment. Head rice ratio and head rice yield was the highest when transplanted in the distance of $30{\times}18cm$ with 3 plants(403 kg/10 a). The protein content was decreased and Toyo taste value was improved when transplanted in the distance of $30{\times}18cm$. Taken together, the best transplanting method for early transplanting cultivation was low planting density($30{\times}18cm$) with 3 plants in Gyeongnam plain area.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.223-233
• /
• 2021

The objective of this study was to investigate the effect of gypsum on the dry matter yield and the chemical composition of alfalfa in reclaimed tideland with soil dressing. The experimental site was Sukmoon reclaimed tideland. The tideland was reclaimed approximately 17 to 33 years ago and the 70 cm of soil was top-dressed. The soil that covers the reclaimed tideland brought from the island did not treat di-salinized. Treatments were consisted of three groups; control group where no gypsum (G0) was applied and two experimental groups where 2 ton/ha (G2) and 4 ton/ha (G4) of gypsum were applied, respectively. The first harvest was conducted when the alfalfa reached early flowering (open the flower 10%), and after that subsequent harvest was conducted at approximately 35 days intervals. The dry matter yield of the alfalfa showed that G2 was significantly higher in the first year than G0 and G4, and G2 tended to be higher in the second year than G0 and G4, although there were no significant differences between treatments. The reason for the high dry matter yield in G2 was that the soil pH and EC of the soil were at marginal and ideal levels and the coverage and alfalfa botanical composition were also high. In both years, there were no differences in the crude protein, neutral detergent fiber and acid detergent fiber contents and relative feed value between gypsum treatments. Meanwhile, the results in the first and second years showed that the alfalfa dry matter yield were negatively affected by droughts stress in spring and concentrated precipitation in summer. Therefore, this study suggests gypsum treatment in reclaimed tidal land could increase the dry matter yield of alfalfa, and 2 ton/ha of gypsum was the optimum rate.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.105-115
• /
• 2016

This study was carried out to establish the optimum forest management plan for the Cryptomeria japonica plantations in southern inland and Jeju island in Korea. Sixty seven circular sample plots of 0.04ha were established and we surveyed vegetation structure and growth characteristics from three layers(upper, middle, and lower). As a result of cluster analysis obtained by importance values of each tree species, the community type of C. japonica stands were classified into C. japonica group(C1) and C. japonica-C obtusa group. C. obtusa community were also sbudivided into P. thunbergii-Q. serrata group(C2) and Q. serrata-C obtusa group(C3). In tree layers importance value(IV) of C. japonica were 97.2% in C1, 80.7% in C2, and 47.6% in C3 and in sub-tree layers IV were 8.9% in C1, 15.2% in C2, and 5.7% in C3. Especially in C3 there are bamboo species (Smilacina japonica var. lutecarpa and Pseudosasa japonica) it is necessary for us to control them. In shrub layers C. japonica were found in C1(9.2%) and C2(7.0%), but except for C3. In tree layer species diversity indices of each community ranged from the lowest 0.059 in C1 to the highest 0.548 in C3. Dominance ranged from 0.958 in C1 to 0.393 in C3 which may caused by interspecific competition. Current annual increment of diameter growth ranged from 7.01mm/yr to 8.04mm/yr. As a result of our study we recommend the application of proper thinning and pruning for C1 and C2.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.1
• /
• pp.86-98
• /
• 2006

This study was conducted to investigate factors affecting bone density of food and nutrition vegetarian and non-vegetarian university students in Seoul area. Data for food habits, dietary and health-related behaviors were obtained by self administered questionnaires. BQI(bone quality index) of the subjects was measured by an Quantitative Ultrasound (QUS). The results are summarized as follows: The average height, weight, BMI and osteopenia percentage of the vegetarian and non-vegetarian male and female student were 172.61cm, 62.42kg, 20.98 and 24.2%; 175.38cm, 72.52kg, 23.71 and 16.7%; 160.47cm, 55.76kg, 21.66 and 55.9%; 161.77cm, 56.34kg, 21.53 and 37.6%, respectively. The BQI of the subjects were 101.73 and 107.43 in male student group, and 84.15, 89.64 in female student group, respectively. The BQI, Z-score value of bone density was significantly different in female group. Weight and BMI were positively related with BQI in male and female group. BQI was positively affected by nutrition supplement and negatively affected by seafood in vegetarian male student group. In vegetarian female student group, amount of meal was positively related with BQI and meal regularity was negatively related BQI. The result of this study revealed that the desirable food habits, dietary behaviors and health-related lifestyles may have a beneficial effect on bone density. They should have practically and systematically organized nutritional education on optimum body weight, good eating habits, weight bearing exercise and intakes of good quality nutrient for higher bone density level.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.359-365
• /
• 2023

Native plants are unique genetic resources that have the potential to be used as ornamental, medical, and food resources. Allium koreanum H.J. Choi & B.U. Oh is one of the native plants distributed in the coastal rocky land of Korea, which has high conservation value due to climate change and reduction of its habitat. This study was conducted to investigate the effects of temperature and hydrogen peroxide on the germination of A. koreanum. The seeds were prepared as untreated (control) or those treated with 1% hydrogen peroxide for 90 minutes (H₂O₂), and the treatments were placed in plant growth chambers set at 15, 20, and 25℃. Regardless of the H₂O₂ treatment, the germination percentage at 15℃, which was 42%, was more than two times higher than that at 20℃ and 25℃, which were 18% and 0%, respectively, 23 days after sowing. The number of days to attain 50% of the final germination percentage (T₅₀) was the shortest at 20℃, but the mean daily germination (MDG) was the highest at 15℃. Therefore, 1% of H₂O₂ treatment did not have a significant effect on the germination percentage of A. koreanum, and a temperature of 15℃ was considered to be optimum to increase the germination percentage of A. koreanum. The results of this study can be used as basic research data for the germination of A. koreanum.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.171-178
• /
• 2009

The study was conducted to clarify the mixed seeding rate of whole crop barley with hood type and forage pea for using of forage crops and to compare the forage yield and quality. At a mixed seeding rate between the whole crop barley (WCB) and forage pea, The heading date and plant height of WCB were not a difference according to mixed seeding rate of forage pea. The tillers of the WCB were a decrease and plant of the forage pea were a increase according to increased seeding rate of forage pea. The lodging index of the WCB was a appearance with distribution of $0{\sim}3$, The lodging index of WCB with a 20kg/10a seeding rate of a only WCB without seeding of the forage pea was 3. The overwintering rate of forage pea was a appearance more than 90% at all treatment. The plant height of forage pea was a increase according to increased seeding rate of forage pea at 14 kg/10a and 20 kg/10a plots of WCB. At a mixed seeding between the WCB and forage pea, The fresh weight was a increase according to increased seeding rate of forage pea and was a appearance more than 3,000 kg at all treatment plot. But the dry matter weight was decrease according to increased seeding rates of forage pea. The dry matter weight of 20 kg/10a seeding rate of a only WCB without seeding of the forage pea showed the most amount with 1,266 kg. The crude protein (CP) content was a tendency to increase according to increased seeding rates of forage pea. But, the relative feed value (RFV) was a tendency to decrease according to increased seeding rate of forage pea. The highest RFV was 183.8 at 14 kg/10a seeding rate of a only WCB without seeding of the forage pea. The acid detergent fiber (ADF) and neutral detergent fiber (NDF) were a increase according to increased seeding rate of forage pea at 14 kg/10a and 20 kg/10a plots of WCB. The highest content of ADF and NDF were 23.9% and 46.3% at mixed seeding rate of 20 kg/10a of WCB with 10 kg/10a of forage pea, respectively. The highest sum of standardized score by fresh weight, dry matter weight, CP, ADF, NDF and RFV was 2.309 at mixed seeding rate of 20 kg/10a of WCB with 7.5 kg/10a of forage pea. The optimum mixed seeding rate was a considered judgment in the order of mixed seeding rate of 20 kg/10a of WCB with 7.5 kg/10a of forage pea, mixed seeding rate of 20 kg/10a of WCB with 5.0 kg/10a of forage pea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.1
• /
• pp.49-57
• /
• 1993

The main experiment related to this report was undertaken to assess the effects of two rates of $Ca(OH)_2$ (0, 250 kg/10a only at establishment) and five rates of N-$P_{2}O_{5}$-$K_2O$ (0-0-0, 0-10-10, 6-15-15, 12-20-20, 24-25-20 kg/10a/year) on the pasture establishment, on forage yield and quality, vegetation etc. After this 10-year main experiment, this pasture had been used to assess the effects of the above treatments on the soil characteristics in oversown hilly pasture of a grass-clover sward. This 1st part is concerned with the soil properties of pH-value. OM, T-N, avail. $P_{2}O_{5}$ and $P_{2}O_{5}$ absorption coefficient, and lime requirement by the soil depth. 1. The pH of the topsoil(0~l5 cm) was lowered from pH 5.12 of before the experiment to 4.90 of when $Ca(OH)_2$ was applied and to 4.68 of when $Ca(OH)_2$ was not applied. The pH decrease was more evident with the increase of NPK application rate and in the upper part of the top soil(0.0~7.5 cm). The additional application of lime was necessary in all the experiment blocks due to the strong acidity of the soil, and the amounts of lime requirement were increased with increased application rates of NPK and soil depth. 2. The contents of organic matter and T-N were increased in all the blocks by the establishment of the hilly pasture, and were higher in $Ca(OH)_2$ applied blocks than non-applied blocks. The contents were inversely correlated with the soil depth. No correlation was observed between the contents and the application rates of NPK. 3. The content of available $P_{2}O_{5}$-$K_2O$, was increased with the increased application of P, especially in the upper part of top soil. The content in the upper part(0.0~7.5 cm) was about twice of that in the lower part(7.5~15.0 cm). Since the contents of available $P_{2}O_{5}$$P_{2}O_{5}$/10a/year were applied, respectively), it is necessary to decrease the application rate of $P_{2}O_{5}$, gradually. The $P_{2}O_{5}$ absorption coefficient in topsoil (0.0~15.0 cm) was more or less higher when no lime and less $P_{2}O_{5}$, was applied. No correlation was observed in subsoil. 4. Further studies on the methods, rates, time of additional application of lime, and on the methods of decreased apllication of $P_{2}O_{5}$ should be performed for better management of oversown hilly pasture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.205-211
• /
• 2000

This study was conducted to evaluate the residual effects of basic oxygen furnace (BOF) slag applied in rice paddy fields as soil conditioner one year before. The experimental fields of Lim et al. (2000) located in Youjung and Nampyung were used for this purpose. Both variety (Oryza sativa L. cv. Dongjinbyeo) and cultural practices were the same as those in Lim et al. (2000). Soil chemical properties, plant height, number of tillers per plant, yield and yield components were observed. The temporal variation of treatment mean value in soil chemical properties appeared to be similar trends in both Youjung and Nampyung experimental fields. Soil pH and Ca content were still significantly higher than those in control treatment up to July of the second season, but decreased progressively as time passed. However, the effects lasted longer as slag rate became higher. BOF slag seems to have residual effects as a soil conditioner or Ca fertilizer in soil for two years. BOF slag rate of $4Mg\;ha^{-1}$ raised soil pH almost the same as lime rate of $2Mg\;ha^{-1}$. Content of $SiO_2$ in soil applied slag appeared to be higher compared with control. Fe and Mg content in soil with slag treatment was significantly higher than that of control in 1997, but it was almost the same level as that of control in 1998. In YouJung experimental field, rough rice yield of slag teatment became higher as slage rate incresed. Slag rate of $12Mg\;ha^{-1}$ showed the highest rough rice yield of $5,400kg\;ha^{-1}$ among treatment, which was 14% higher than that of control with $4,720kg\;ha^{-1}$. Slag rate of $12Mg\;ha^{-1}$ showed relatively higher plant height and higher number of tillers at the early growth stage compared with other treatments. In NamPyung experimental field, rough rice yield was the highest at the plot of lime rate $2Mg\;ha^{-1}$ and became higher as slag rate increased. There were no significant differences in rough rice yield between lime treatment and slag treatments. Slag rate of $12Mg\;ha^{-1}$ showed the highest rough rice yield of $7,170kg\;ha^{-1}$ among slag treatment, which was 8% significantly higher than that of control with $6,670kg\;ha^{-1}$. Slag rate of $12Mg\;ha^{-1}$ showed relatively slower growth in plant height at the early growth stage, but superior growth at the later growth stage, and significantly higher number of spiklets per panicle and 1000-grain weight than that of control.