• Macromolecular Research
• /
• v.16 no.3
• /
• pp.212-217
• /
• 2008

PVDF ($Kynar^{(R)}$ 761) nanofibers were made by electrospinning with an external voltage of 6-10 kV, a traveling distance of 7-15 cm and a flow rate of 0.4-1 mL/h. Although the mean diameter of the fibers has not changed significantly, the conditions affected the change in diameter distribution. This was attributed to interactions, both attraction and repulsion, between the positive charges on the polymer solutions and the electrically grounded collector. Higher voltages and traveling distance increased the level of attraction between the positive charge on the polymer solution and the electrically grounded collector, resulting in a narrow diameter distribution, In addition, a high flow rate allowed a high population of uniformly charged solutions to travel to the grounded collector, which resulted in a narrow diameter distribution. The optimum conditions for electrospinning of PVDF in DMAc/acetone (3/7 by wt) were a collector voltage of 6 kV, a syringe tip to collector of 7 cm, a flux rate of 0.4 mL/h and 10 kV, 10 cm, 1 mL/h, Since PVDF is widely used as a filtration membrane, it was electrospun on a PET support with a rotating drum as a grounded collector. Surprisingly, some straight nanofibers were separated from the randomly deposited nanofibers. The straight nanofiber area was transparent, while the randomly deposited nanofiber area was opaque. Both straight nanofibers and aligned nanotibers could be obtained by manipulating the PET drum collector. These phenomena were not observed when the support was changed to an Al sheet. This suggests that a pseudo dual collector was generated on the PET sheet. No negative charge was created because the PET sheet was not a conductive material. However, less charge was created when the sheet was not perfectly attached to the metal drum. Hence, the nanotibers jumped from one grounded site to the nearest one, yielding a straight nanofiber.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.429-437
• /
• 2020

This study aimed to investigate the change in physicochemical properties and lactic acid bacterial communities during kimchi fermentation at different temperatures (8, 15, and 25 ℃) using two molecular genetics approaches, multiplex polymerase chain reaction and 16S rRNA gene sequencing. The pH during fermentation at 8, 15, and 25 ℃ decreased from 6.17 on the initial fermentation day to 3.92, 3.79, and 3.48 after 54, 30, and 24 days of fermentation, respectively, while the acidity increased from 0.24% to 1.12, 1.35, and 1.54%, respectively. In particular, the levels of lactic acid increased from 3.74 g/L on the initial day (day 0) to 14.43, 20.60, and 27.69 g/L during the fermentation after 24, 18, and 12 days at 8, 15, and 25 ℃, respectively, after that the lactic acid concentrations decreased slowly. The predominance of lactic acid bacteria (LAB) in the fermented kimchi was dependent on fermentation stage and temperature: Lactobacillus sakei appeared during the initial stage and Leuconsotoc mesenteroides was observed during the optimum-ripening stage at 8, 15, and 25 ℃. Lac. sakei and Lactobacillus plantarum grew rapidly in kimchi produced at 8, 15, and 25 ℃. In addition, Weissella koreensis first appeared at days 12, 9, and 6 at 8, 15, and 25 ℃ of fermentation, respectively. This result suggests that LAB population dynamics are rather sensitive to environmental conditions, such as pH, acidity, salinity, temperature, and chemical factors including free sugar and organic acids.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.133-137
• /
• 1969

This experiment was conducted to determine the optimum row width and plant spacing within row under the tropical environment for a leading soybean variety Palmetto and it was carried out at Eakmat Experiment Station in Vietnam. The experiments were arranged in a split plot design with four replications and the test was repeated twice in two years. Variations for seed yield due to the distance between rows were significant at 1 per cent level in 1967 test(dry season growing) and at 5 per cent level in 1968 test. Significant differences for plant height, lodging, maturity, number of branches per plant, and number of pods per plant due to the row width were not found in both tests, while significant differences in difference spacing within row was found in all traits studied. Interaction between width of row and spacing within row for seed yield and plant height were found at five percent level in 1967 test. These results indicate that close planting may increase in seed yield and plant height in both seasons, and decrease in loadging. From these studies, one could be understood that the plant population, particularly in dry season, plays decisive roles on seed yield in soybean culture, and the maximum plant height and minimum value of lodging index were also observed in closest spacing plots. The highest soybean yield in late planting would be expected by a combinations of 30 cm(between rows)${\times}$5cm(between hills) plot, while 40cm ${\times}$ 5cm planting method would be suggested for rainy season growing. Highest seed yield was obtained at closet spacing in both dry and rainy season, and these results led to drilling method in seeding where about 20 seeds per meter of row could be recommended. Besides the seed yield, the close planting may produce some advantages, such as increase plant height and decrease lodging, weeds and erosion of surface soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.249-255
• /
• 1987

To find out the optimum planting date of silage corn in the rice black-streaked dwarf virus (RBSDV) pre-valent area, a resistant hybrid of Jinjuok and a susceptible hybrid of Suweon 19 were planted at the 8 planting dates from April 1 to June 10 at the la-day intervals. Considering escape of RBSDV and silage yield, the optimum planting date seems to be during the April in both hybrids. At the April plantings silage yield of two hybrids ranged from 17 to 23 tons/ha on the dry matter base due to a lower infection rate and higher tolerance to RBSDV and there was no difference in silage yield between two hybrids. At the May plantings yield of ear, stover, and silage, culm length, and digestible dry matter decreased significantly as planting date delayed due to an increase in RBSDV infection rate in both hybrids although performance of a resistant hybrid of Jinjuok was better than a susceptible hybrid of Suweon 19. At the June 10 planting RBSDV infection rate was low and performance of corn was better than that at the May plantings but poorer than that at the April plantings. The peak of small brown planthopper population occurred in late March or early April, middle June, middle July, and early September although it fluctuated a little yearly. Very low small brown planthopper population during the May may attribute to a lower RBSDV infection and high silage yields at the April plantings because the plants grow enough to be tolerant when infected by RBSDV in middle June. However, at the May plantings plants are too young to be tolerant when infected by RBSDV in middle June.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.69-89
• /
• 1981

Stevia (Stevia rebaudiana Bertoni) is a perennial herb widely distributed in the mountainous area of Paraguay. It belongs to the family Compositae and contains 6 to 12 percent stevioside in the leaves. Stevioside is a glucoside having similar sweetening character to surgar and the degree of sweetness is approximately 300 times of sugar. Since Korea does not produce any sugar crops, and the synthetic sweetenings are potentially hazardous for health, it is rather urgent to develop an economical new sweetener. Consequently, the current experiments are conducted to establish cultural practices of stevia, a new sweetening herbs, introduced into Korea in 1973 and the results are summarized as followings: 1. Days from transplanting of cuttings to the flower bud formation of 6 stevia lines were similar among daylengths of 8, 10 and 12 hours, but it was much greater at daylengths of 14 or 24 hour and varietal differences were noticable. All lines were photosensitive, but a line, 77013, was the most sensitive and 77067 and Suweon 2 were less sensitive to daylength. 2. Critical daylength of all lines seemed to be approximately 12 hours. Growth of plants was severely retarded at daylengths less than 12 hours. 3. Cutting were responded to short daylength before rooting. Number of days from transplanting to flower bud formation of 40-day old cuttings in the nursery bed was 20 days and it was delayed as duration of nursery were shorter. 4. Number of days from emergence to flower bud formation was shortest at short day treatment from 20 days after emergence. It was became longer as initiation of short day treatment was earlier or later than 20 days. 5. Plant height, number of branches, and top dry weight of stevia were reduced as cutting date was delayed from March 20 to May 20. The highest yield of dry leaf was obtained at nursery duration of 40-50 days in march 20 cutting, 30-40 days in April 20 cutting, and 30 days in May 20 cutting. 6. An asymptotic relationship was observed between plant population and leaf dry weight. Yield of dry leaf increased rapidly as plant population increased from 5,000 to 10,000 plants/10a with a reduced increasing rate from 10,000 to 20,000 plants/l0a, and levelled off at the plant population higher than 20,000 plants/l0a. 7. Stevia was adaptable in Suweon, Chengju, Mokpo and Jeju and drought was one of the main factors reducing yield of dry leaf. Yield of dry leaf was reduced significantly (approximately 30%) at June 20 transplanting compared to optimum transplanting. 8. Yield of dry leaf was higher in a vinyl house compared to unprotected control at long daylength or natural daylength except at short day treatment at March 20. Higher temperature ill a vinyl house does not have benefital effects at April 20 transplanting. 9. The highest content of stevioside was noted at the upper leaves of the plant but the lowest was measured at the plant parts of 20cm above ground. Leaf dry weight and stevioside yield was mainly contributed by the plant parts of 60 to 120cm above ground but the varietal differences were also significant. 10. Delayed harvest by the time of flower bud formation increased leaf dry weight remarkably. However, there were insignificant changes of yield as harvests were made at any time after flower bud formation. Content of stevioside was highest at the time of flower bud formation and earlier or later harvest than this time was low in its content. The optimum harvesting time determined by leaf dry weight and stevioside content was the periods from flower bud formation to right before flowering that would be the period from September 10 to September 15 in Suweon area. 11. Stevioside and rebaudioside content in the leaves of Stevia varieties were ranged from 5.4% to 14.3% and 1.5% to 8.3% respectively. However, no definit relationships between stevioside and rebaudioside were observed in these particular experiments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.27-44
• /
• 1999

Digital maps produced in Korea are various in scale and include a lot of geographic and attribute data. In this study, it is argued that, to reduce the production cost and the difficulties for renewal, it is necessary to establish the already nationally drawn 1:5,000 scale digital maps as the base maps and simplify them as much as the TIGER files in the U.S. The comprehensive data included in the digital maps in Korea are mostly land use information, which are supposed to be established separately from the digital maps. The land use information system could be maintained and updated cheaply and frequently at the local government level. In response to common needs, the land use information could be imported to GIS and used for analyses. As technologies and societies changes, the Census questions and methodologies should be changed for better uses. Along with GIS, the Census would be developed and processed more reliably and efficiently. Also, it is recommended for Korean government to develop the Census Tract and Block Group system. Current Eup, Myon, Dong as basic units for Census information may not be useful or effective for micro level urban analyses and public service planning activities because of their large population and land areas. It is recommended that optimum population of a Census Tract be 5,000 and a Block Groups 1,500, and one Census Tract includes 1~9 Block Groups. It is recommend that Census Tract and Block Group boundary lines be decided flexibly in light of population, physical features, socio-economic attributes, and tradition. For urban analyses using GIS, socio-economic census data, city government's information such as parcel data and building permit data, survey data, and satellite image data could also be used. The existence of Census Tracts and Block Groups as well as GIS could help for the data and methods to be useful for urban analyses and public service provisions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.1
• /
• pp.17-25
• /
• 1982

To clarify the direct effect of potassium and interactions with nitrogen and phosphorus on the yield of pasture plants, fertilizer experiment with varied levels of potassium and nitrogen treatment to grass single seeding, legume single seeding and grass-legume mixed seeding, was conducted for three years from 1977 to 1980. The summary of obtained experimental result may be described as below: 1. Potassium application, at any level of amount, did not show its effect to the establishment of plant population, however potash application responded to help winter hardiness at grass single seeding plot. 2. Potassium effect on the fresh yield at grass single seeding was distinct however, not clear effect was observed at legume single seeding and grass-legume mixed seeding plots. 3. For drymatter yield, the highest yield at legume single seeding was recorded 1.152 Kilograms per 10a are at treatment #4 and the highest yields of grass-legume mixed seeding and grass were recorded 1,093 kilograms (Treatment #3) and 834 kilograms (Treatment #5) respectively. 4. In observation of plant succession, they were found that orchardgrass and tall fescue have increased at grass single seeding plot and Alfalfa was dominant over 90 per cent of plant population at legume single seeding and grass-legume mixed seeding plots. It seems that potash effect was distinct in increasing orchardgrass population. 5. The results of this experiment shown that the maximum yield from grass single seeding was obtained at the plat where applied 20-20-30 kg/10a, $N-P_2O_5-K_2O$ and the maximum yield from legume single seeding was obtained at the plot applied with 8-20-20 kg/10a, $N-P_2O_5-K_2O$. 6. Fertilizer cost for producing one kilogram of dry matter in this experiment was lowest at treatment #1 of grass-legume mixed seeding and highest at treatment #5 of grass single seeding. The largest gross income was obtained from the plots where phosphate application was omitted. 7. From the results of this experiment, it may be recommended that economically optimum fertilizer application for grass single seeding will be 20-20-20- kg/10a, $N-P_2O_5-K_2O$ and for legume single seeding and grass-legume mixed seeding will be 8-20-20 kg/10a, $N-P_2O_5-K_2O$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.53-62
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) has been increasingly used as a rapid, accurate method of evaluating some chemical compositions in forages. Analysis of forage quality by NIRS usually involves dry ground samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations and spectral math treatments on prediction ability of chemical composition for corn silage by NIRS. A population of 112 corn silage representing a wide range in chemical parameters were used in this investigation. Samples of com silage were scanned at 2nm intervals over the wavelength range 400-2500nm and the optical data recorded as log l/Reflectance(log l/R) and scanned in overt-dried grinding(ODG), liquid nitrogen grinding(LNG) or intact fresh(IF) condition. Samples were analysed for neutral detergent fiber(NDF), acid detergent fiber(ADF), acid detergent lignin(ADL), crude protein(CP) and crude ash content were expressed on a dry-matter(DM) basis. The spectral data were regressed against a range of chemical parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with four spectral math treatments to reduce the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation(SECV). The results of this study show that NIRS predicted the chemical parameters with very high degree of accuracy(the correlation coefficient of cross validation$(R^2cv)$ range from $0.70{\sim}0.95$) in ODG. The optimum equations were selected on the basis of minimizing the standard error of prediction(SEP). The Optimum sample preparation methods and spectral math treatment were for ADF, the ODG method using 2,10,5 math treatment(SEP = 0.99, $R^2v=0.93$), and for CP, the ODG method using 1,4,4 math treatment(SEP = 0.29. $R^2v=0.91$).

• Journal of Korean Academy of Nursing
• /
• v.7 no.2
• /
• pp.11-21
• /
• 1977

Many in nursing look back on Nursing Research history and proudly point to the fact that emphasis in nursing research has changed from studying the nurse to studying nursing practice. In recent years, much emphasis has been placed on seeking a method of evaluating the quality of nursing care. In spite of these attempts, however, an instrument for evaluating the quality of nursing care that is actually applicable in the clinical area has not been found. The Purposes of this study are as follows: 1) To develop the instrument to be used in evaluating the quality of nursing care provided in the Neuro - Surgery Constant Care Unit of Severance Hospital 2) To evaluate the quality of nursing care in the clinical area. 3) To provide the necessary information for improvement of quality of nursing care. The instrument for evaluating the quality of nursing care, developed by the investigator, was composed of 7 nursing goals and divided into 65 standards of nursing performance. The 7 nursing goal are as follows : 1) Maintenance of airway 2) Maintenance of fluid at electrolyte balance 3) Maintenance of elimination 4) Personal hygiene 5) Optimum activity 6) Prevention of accidents 7) Emotional care The study population defined was composed of all the case (51) who were admitted in the Neuro- Surgery Constant Care Unit of Severance Hospital from May 7-13, 1976. The observation method was used and the data was subjected to the %, X²-test, T-test, F-test and Correlation. The results of tile study were as follows : 1. Levels of nursing performance regarding nursing goals. Seven different nursing care indices were constructed in terms of nursing goals. The index scores were grouped arbitrarily into ,j categories such as "excellent", "good", "moderate", "incomplete", and "poor"based upon the investigator′s personal judgement. a. The nursing index of maintaining airway showed that 78% of the patients fell within the "excellent" and 22% of the patients, fell within the "good" category. b. The nursing index of maintaining fluid & electrolyte balance showed that 95% of the patients fell within the "excellent" and 5 % of the patients fell within the "good" category. c. The nursing index of maintaining elimination showed that 100% of the patients fell within the "excellent" category. d. The nursing index of personal hygiene revealed that 49% of the patients fell within the "excellent" and 51% of the patients fell within the "good" category. e. The nursing index of optimum activity showed that 63% of the patients fell within the "excellent" and 32% of the patients fell within tile "good" and 5% of patients fell within the "moderate" category. f. The nursing index of prevention of accidents showed that 100% of the patients foil within the "excellent" category. g. The nursing index of emotional cart revealed that 27% of the patients fell within the "excellent", 24 % of the patients fell within tile "good", 29 % of the patients fell within the "incomplete" category. From these findings it is disclosed that the quality of nursing care provided in the Neuro- Surgery Constant Care Unit of Severance Hospital was excellent. h. There were statistically significant differences between the nursing index of physical care and emotional care. (t=8.73, D. F. =100. p<0.01) It is revealed that more physical care then emotional care was carried out by nurses. 2. Levels of nursing performance regarding general characteristics of the patients. No significant differences were observed statistically with the nursing indices of nursing goals according to the sex (t=0.084, D. F. =12, p>0.05). Age (F=0.1251, D. F. : 3.18. p 〉0.05), absence or presence of operating experiences (t=0.6032, D. F. =12, p〉0.05, levels of consciousness (F=0.31, D. F. :3. 18, p >0.05) 3. Relationship between the levels of consciousness and the nursing index of each nursing goal. There was negative correlation between the levels of consciousness and the nursing index of maintaining airway (r=-0. 5449, p<0.01) and personal hygiene (r= -0.4075, p<0.01) There was positive correlation between the levels of consciousness and the nursing index of optimum activity (r=0.3936, p <0.01) and emotional care (r=0.7819, p〈0.01). There was slight correlation between the levels of consciousness and the nursing index of maintaining fluid & electrolyte balance (r=-0.3418, 0.010.05) and preventing accidents (r=0.1441, p>0.05.