• 멤브레인
• /
• 제1권1호
• /
• pp.34-43
• /
• 1991

물에 대해 수착선택성이 높은 아세트산 셀룰로오스 치밀막(CA막)과 에탄올에 대해 수착선택성이 높은 실리콘 고무막(SR막)을 통한 물(1)/에탄올(2) 이성분 혼합액의 투과증발에 있어서 막의 친화성과 최적 조업조건의 관계를 조사하였다. CA막과 SR막을 제조하여, 이들 막에서의 수착량, 수착선택도, 투과증발 분리도 및 투과증발 속도를 실험으로 구하고 서로 비교하였다. 하류압력의 영향을 Thompson다이아그램을 써서 분석하였고, 공급액 농도와 조업 온도 변화에 따른 수착 및 투과증발 특성을 활동도 계수, 가소화 효과, 활성화에너지 등으로 설명할 수 있었다. CA막을 사용한 물의 분리의 경우에는 물에 대한 투과증발 분리도 ($[\alpha^2_1]_{PV}$) 및 투과증발 속도 모두 하류압력이 낮고, 공급액의 농도가 중간 정도이고, 온도가 높은 조업조건이 유리하였다. 그러나 SR막을 사용한 에탄올의 분리의 경우에는 에탄올에 대한 투과증발 분리도 ($[\alpha^2_1]_{PV}$) 는 하류압력이 높을수록, 공급액 중의 에탄올 농도가 낮을수록, 조업온도가 낮을수록 증가하였지만, 투과증발 속도는 반대의 경향을 나타내었다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.400-408
• /
• 2009

Simulation applications for analyzing the productivity of construction operations at operation level and project schedules at project level are crucial methods in project management. The application at two different levels should be very tightly linked to each other in practice. However, appropriate integration at the levels is not achieved in that existing systems do not support to integrate operation models into a schedule model. This paper presents a new approach named to Discrete Event Simulation-Nesting modeling approach, which supports not only productivity analysis at operation level but also schedule management at a project level. The system developed by the authors allows creating operation models at the operation level, maintaining them in operation model library, executing sensitivity analysis to find the behaviors of the operation models when different combination of resources are used as existing DES systems do. On top of the conventional functions, the new system facilitates to find the optimum solution of resource combinations which satisfy the user's interest by computing the hourly productivity and the hourly cost of the operation. By drag-and-dropping an operation model kept in the operation model library, the operation models are integrated into an activity of the schedule model. When a complete schedule model is established by nesting operation models into the schedule model, stochastic simulation based scheduling is executed. A case study is presented to demonstrate the new simulation system and verify the validity of the system.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.19-30
• /
• 2016

In this study, realize voltage regulation $220Vac{\pm}10%$ or less, frequency fluctuation $60Hz{\pm}1%$ or less over the independent operation and grid-connected operation technologies for power stabilization relates to the ESS designed and manufactured in conjunction with solar installations and solar to compensate the output reduction due to the polarization of the solar module through the polarization prevention technology for preventing the optical module efficiency is lowered, in conjunction with the BMS inverter efficiency was more than 92%, more than 90% of the charging efficiency to the target. This study was designed in conjunction with the ESS solar power plants, grid-connected operation and independent operation, Peak-Cut, it can stabilize the grid via the Peak-Shifting operation

• 전기학회논문지
• /
• 제65권6호
• /
• pp.969-978
• /
• 2016

Around the world are increasing the demand for ESS. Currently, the domestic is expected to benefit by operating ESS. In the domestic, it is expected to benefit from operations of the installed ESS because of the introduction of ESS less capacity. However ESS capacity to the maximum profit occurs is unknown. ESS is different from the charge-discharge characteristics and the reserve to replace, depending on the application. Therefore, it should be established in accordance with the ESS optimal capacity according to the purpose used because it can maximize the quality and efficiency of the electric energy. To the ESS optimal capacity estimation by the purpose used, It should compare the investment cost caused by ESS facility installation and operation cost caused by operating ESS. In this paper, the operation mathematical model for estimating marginal operation costs established. In operation mathematical model, operating cost is considered fuel cost and no-load cost start-up cost. Because no-load cost and start-up cost are not related to cost and power plant output, there are expressed an integer variable costs as a step function.

• 경영과학
• /
• 제34권2호
• /
• pp.103-113
• /
• 2017

The artillery is a key element of the ground forces operation during wartime, and the military engineers support the artillery position development operation to support the smooth operation of the artillery. In establishing the artillery position development operation plan, the commander requires more than his intuition to find the best option reflecting a number of elements of the battlefield situation which changes every minute. Moreover, the number of available equipment is smaller than the number of required position developments, and the effective equipment operation becomes essential element of this issue. This study quantified the capability of the available engineering equipment, organized a number of teams enabling equipment to put out the maximum capacity based on the quantified figures, and formed the model which allocates the team to the developing points to minimize the developing time. The goal programming method was applied to resolve the problem. The developed model was applied to compare the total mission duration following the number of teams, the variable for commander's decision, and the result of this study can be used as the quantitative data for commander's decision making process in establishing the artillery position development support operation through effective equipment management.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.61-68
• /
• 2023

This paper aims to perform optimal operation and maintenance with an integrated monitoring system for offshore wind platforms. Based on the wind direction and wind speed data of existing wind farms, a monitoring system was established along with weather and weather data to maximize the operational efficiency of wind farms. Compared to wind power on land, offshore wind power is difficult to maintain due to weather, logistics and geographical limitations. Therefore, economic analysis of actual operation and maintenance is essential for large-scale offshore wind farms. In this paper, the availability of offshore wind farms was analyzed by using personnel resources, parts inventory, Crew Transfer Vessel (CTV) and Specialized service Operation Vessel (SOV) etc. before the actual operation and maintenance of wind farms. A comparative analysis was conducted to determine the optimum operating efficiency and economical maintenance costs.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.27-35
• /
• 1985

This study was carried out to determine the optimum size and number of farm machines for various sizes of land coverage of the cooperative farm machinery utilization systems in Korea-namely Saemaul Mechanized Farming Group (SMFG). Fifty-one SMFG were selected from 8 counties in Chonnam province, and ownership, operation and management of farm machinery were surveyed. Annual covered area, cost and the break-even-point area of farm machinery were analyzed on the bases of the surveyed data and the present governmental subsidy policy, and then the optimum level of farm machinery ownership was determined. The results are summarized as follows: 1. The break-even-point areas of the tractors of 22-23ps, 28ps and 47-50ps were estimated as 12.1ha, 15.3ha and 21.6ha, respectively. The optimum size of a tractor for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 22-23ps, 28ps, and 47-50ps, respectively. 2. The break-even-point area of a rice transplanter was estimated as 3.3ha. The optimum numbers of rice transplanter for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3, and 4, respectively. 3. The break-even-point areas of a speed sprayer (attached on power tiller) and a power sprayer were estimated as 114.6ha and 15.3ha, respectively. The optimum numbers of power sprayer for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3 and 4, respectively. A speed sprayer is desirable for an area of more than 30ha coverage. 4. The break-even-point area of a combine was estimated as 10.7ha. The optimum numbers of combine for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 1,2, and 3, respectively.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.402-404
• /
• 2000

In this study, we have developed an ultrasonic separation system for plant cells and its operating conditions in terms of voltage, flow rate and concentration were examined. For plant cell, the operation of ultrasonic separator highly depended on concentration of cells. Holding capacity highly depended on flow rate in chamber. Optimum voltage was 30V in high density culture

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.621-626
• /
• 2008

• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.421-428
• /
• 2003

This study was conducted to determine the optimum blade shape for peeling Altari radish. To figure out the required peeling force according to various angles of blade and rakes of peeling cutter, two peeling tests such as circumferential peeling and longitudinal peeling of Altari radish were carried out. Based on the pretest results, which performed to investigate the applicability of the optimum shape of cutter and to find out the cutting pattern according to the lapse of days after harvesting the radish, the peeling depth and width of the blade were fixed at 2 mm and 10 mm. From two methods of circumferential and longitudinal peeling test, the angles of rake and blade as cutter shape factors were affected on peeling force. But the peeling speed was not affected on it under the safety speed as 0.2 m/s, without blade vibrating on peeling operation. The rake angle was more effective factor than the blade angle, and the optimum angles of blade and rake were 10$^{\circ}$ and 55$^{\circ}$ respectively. The cutting surface by the longitudinal peeling was more smooth than that by the circumferential peeling. There was no problem in peeling work during 4 days after harvest because the freshness of the Altari radish was maintained.