• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1829-1831
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 융합신호처리학회논문지
• /
• 제16권4호
• /
• pp.175-181
• /
• 2015

본 논문은 전파천문 관측데이터 분석을 위해 소프트웨어를 이용한 디지털필터 설계방법에 대해 제안한다. 전파천문 관측시스템은 컴퓨팅 시스템의 발전과 함께 하드웨어에서 소프트웨어를 이용한 분석방법으로 넘어가는 단계이다. 기존 하드웨어로는 특정규격에 맞도록 설계 제작되었기 때문에 규격을 변경하는 것이 어렵고 제작에 많은 비용이 소요되지만, 소프트웨어는 규격 변경이 유연하고 공개 소프트웨어를 이용할 경우 저렴하게 설계할 수 있는 장점이 있다. 그러나 소프트웨어로 전파천문과 같이 많은 자료를 분석하기 위해서는 컴퓨터 시스템의 성능이 우수해야 하는 점도 있다. 본 연구에서는 한국우주전파관측망에서 운영하고 있는 관측시스템 중에서 하드웨어로 구성된 디지털필터와 같은 성능을 갖는 소프트웨어 디지털 필터 설계에 대해 제안한다. 제안 방법은 표준 C언어를 이용하여 디지털 필터를 설계하였으며, 설계한 디지털필터에 대해 GNU Octave로 시뮬레이션을 수행하여 유효성을 검토하였다. 또한 설계한 디지털필터의 고속연산을 위해 병렬연산이 가능한 SSE 라이브러리를 도입하였다. KVN 관측모드 중에 광대역 관측데이터를 대상으로 제안한 방법의 디지털 필터를 통하여 협대역 관측모드로 데이터 필터링을 수행하였다. 그 결과, 대역 내의 필터링이 설계대로 수행되었고 리플이 발생하지 않아, 제안방법이 유효함을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.237-240
• /
• 2001

Dense Wavelength division multiplexing(DWDM) lightwave system requires multiplexer, demultiplexer and optical filter. In this paper, thus, we propose the Add-Drop Mux/Demux based on a Mach-Zehnder interferometer(MZI) with fiber Bragg grating(FBG). The Add-Drop Mux/Demux using FBG and MZI is able to minimize system and reduce weight. We also analyze output characteristics of Add-Drop Mux/Demux and present the optimum design data through the computer simulation.

• 대한전자공학회논문지SD
• /
• 제41권5호
• /
• pp.9-14
• /
• 2004

WDM 광통신 시스템에서 중요한 소자는 여러 개의 광신호를 결합, 분리시켜주는 멀티플렉서, 디멀티플렉서 그리고 특정파장을 선택할 수 있는 필터이다. 그러나, 이러한 시스템의 형태는 집적소자의 형태가 아니기 때문에 손실이 비교적 크고 시스템을 소형화, 경량화 하는데 어려움이 있어 이를 보완하기 위한 집적형태의 소자가 필요하다. 본 논문에서는 WDM 광통신 시스템에서 사용할 수 있는 집적 소자 형태의 OADM의 설계를 위해 FBG와 MZI를 이용하여 구성하고, 이를 컴퓨터 시뮬레이션을 통해 최적의 설계값을 제시하였으며, 실험을 통하여, 제작된 OADM의 특성을 측정함으로써 시뮬레이션을 통해 얻어진 설계값과 비교, 분석하였다. 제안한 OADM은 선폭을 조절함으로써 선택할 수 있는 파장의 범위가 넓어져 DWDM 시스템에서도 적합함을 검증할 수 있었다.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.232-239
• /
• 2013

In this study, 25gsm melt-blown polypropylene nonwoven for dust-proof/medical masks was finished by the corona discharging treatment. The influence of corona discharging parameters on the filtration efficiency was investigated. Several parameters such as discharging voltage, discharging speed, distance to discharging wire and configuration of discharging system had an effect on filtration efficiency, while the parameters had no effect on breathing resistance. Optimum corona discharging conditions are as follows: Wires were installed on the upper part of the nonwoven and paper pipe was installed on the lower part of the nonwoven having a distance of 5cm. The sequence of wire voltages was +60 kV, +60 kV, 0, -60 kV, and -60 kV. The discharging voltage and speed were 60 kV and 30m/min respectively. The nonwoven treated by corona discharging at the optimum condition showed a filtration efficiency of 80% or more, which is suitable for dust-proof/medical masks.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• 청정기술
• /
• 제8권3호
• /
• pp.141-149
• /
• 2002

본 연구에서는 공기청정 시스템의 최적설계에 필요한 자료를 획득하기 위하여, 광촉매 필터 부분을 포함한 전체 시스템의 유동저항 특성을 수치해석 방법으로 연구하였으며, 이를 위해 광촉매 필터의 압력 강하량을 예측한 후, 이 결과를 바탕으로 광촉매 필터를 다공성 매질로 대체하여 전체 시스템의 해석에 이용하였다. 연구과정 중에 사용된 광촉매 필터는 원관형 필터로서 내경 6 mm와 20 mm의 두 가지 모델이 고려되었다. 내경 6 mm의 원관형 촉매는 내경 20 mm의 촉매에 비해 약 3배 높은 압력 강하량을 보였으며, 여러 개의 원관을 체결하기 위해 사용되는 촉매 하우징이 장착된 경우에 대해서도 해석을 수행하였다. 하우징이 있는 경우 압력 강하는 하우징이 없는 경우에 비해 약 8배 증가하였다. 전체 시스템의 유동장을 계산하기 위해 모사된 다공성 매질은 광촉매 필터의 특성을 1% 미만의 오차로 정확히 모사하고 있으며, 이를 이용하여 전체 시스템을 해석할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.253-259
• /
• 2008

In this paper an optimum design of a lab-scale biofilter for absorbing ammonia has been proposed and analyzed. This biofilter is using pine chaff and wood shaving as filter materials. It is assumed that the biofilter can be used as a storage tank of swine manure slurry or swine stall. To evaluate the biofilter performance, the ammonia, mainly offensive odor ingredient, was measured. Swine compost was mixed with filter materials in ratio of 1:1 on weight base. Each test continued for 20 days. The ammonia emissions were reduced by 97.9% and 98.3% in case of using biofilter filled with pine chaff and compost, and wood shaving and compost, respectively. The system was tested with and without adding compost. It was found that the biofilter with wood shaving and compost has an ammonia removal efficiency of 94.1%, while biofilter with wood shaving only has 85.3%. The biofilter with wood shaving and compost showed 8.8% higher removal efficiency than that of wood shaving only. By mixing the compost, the number of microorganism was found to be about 2.3 times more than that of wood shaving only. Therefore it can be concluded that adding compost has a positive effect on the formation of microorganism.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.552-554
• /
• 1998

In target tracking problems the fixed gain Kalman filter is primarily used to predict a target state vector. This filter, however, has a poor precision for maneuvering targets while it has a good performance for non-maneuvering targets. To overcome the problem this paper proposes the system which estimates the acceleration with neural networks using the input estimation technique. The ability to efficiently fuse information of different forms is one of the major capabilities of trained multi-layer neural networks. The primary motivation for employing neural networks in these applications comes from the efficiency with which more features can be utilized as inputs for estimating target maneuvers. The parallel processing capability of a properly trained neural network can permit fast processing of features to yield correct acceleration estimates. The features used as inputs can be extracted from the combinations of innovation data and heading changes, and for this we set the two dimensional model. The properly trained neural network system outputs the acceleration estimates and compensates for the primary Kalman filter. Finally the proposed system shows the optimum performance.