• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.299-309
• /
• 1997

This experiment was conducted to determine the mineral absorption character and develop the optimum composition of nutrient solution for dill(Anethum graveolens L.) in hydroponics. Dill(Anethum graveolens L.) plants were grown in nutrient film technique(NFT) supplied with 1/4, 1/2, and 1 strength of the nutrient solution developed by National Research Station in Japan(HRS). Plants grown in 1/2 strength showed the best growth in plant height, fresh weight, and dry weight compared with those grown in 1/4 or 1 strength. In 1/2 strength solution, pH and EC changed little and proper nutrient contents were observed in the leaves as compared to plant nutrient diagnosis standard. Based on these results, optimum macronutrients were composed by nutrient- water absorption rate(n/w) with 1/2 strength: NO$_2$―N 8.85, NH$_4$―N 0.55, P 2.1, K 6.2, Ca 2.8, and Mg 1.7 me L$^{-1}$ To examine the suitability of the nutrient solution developed(SCU) , dill plants were grown in NFT supplied with two different kinds of solution and concentration. 1/2, 1, 3/2 and 25 of SCU and 1/2S of HRS. Changes of pH and EC were not distinct in 1S, but a significant change of pH was shown in low concentrations-HRS 1/2S and SCU 1/2S. Shoot fresh and dry weight were much higher in the plants grown in SCU IS as compared with HRS 1/2S. There were no significant differences in growth of plants grown in SCU IS, 3/2S, and 25. In addition, nutrient contents in the leaves grown by SCU 1S were in proper levels as compared with plant nutrient diagnosis standard. SCU 1S developed in this experiment was found to be optimum for dill in hydroponics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.297-303
• /
• 1985

Three field experiments were conducted to define the optimum levels, yield responses and fertilization efficiencies of NPK fertilizers on peanut and survey on fertility status of 150 farmers` peanut fields was carried out for 3 years. The range of optimum rates of N, $P_2O_5$ and $K_2O$ fertilizers on peanut were 5.2-9.0, 6.4-21.0, 8.5-15.0kg/10a, respectively. The effect of NPK application were 23, 8, 16% and production efficiencies of each kg of NPK fertilizers were 6.0, 1.8, 3.4 kg, respectively. The optimum nutrient contents in soil were 250 ppm for available $P_2O_5$ and 0.8 me/100g for exchangeable K including applied ones. Available soil nutrient contents of farmers' peanut fields were mostly below the optimum range for upland soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.34-41
• /
• 2008

This study was conducted to investigate antioxidant component content during maturity for judgement of optimum harvest time in black soybean. For high-functional black soybean production, accumulation pattern of isoflavone and saponin contents and anti oxidative activity according to maturity stage were investigated. Varieties used in this experiment were Ilpumgemojeongkong and heukcheongkong, which are the recommended black soybean in Korea. Isoflavone and saponin contents during maturity period in black soybean was the highest at $6{\sim}7$ days earlier than general harvesting time. It was indicated that optimum harvesting time for high quality soybean were $3{\sim}7$ days earlier than harvesting time for higher yield. As a result of investigation about accumulation pattern of antioxidant components by maturity stages in seed, total isoflavone content was the highest at 61 DAF in Ilpumgeomjeongkong and at 77 DAF in Heukcheongkong. Contents of total saponin were the highest at 61 DAF and at 71 DAF, respectively. In case of leaf, total isoflavone content was the highest at 55 DAF in Ilpumgeomjeongkong and Heukcheongkong. Contents of total saponin were the highest at 18 DAF and at $55{\sim}71$ DAF, respectively. It showed that black soybean's leaf could be developed as a new health food material, owing to high contents of antioxidant components and biological activity and it's suitable harvest time was at $R_7$.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.20-28
• /
• 2013

Recently, as the registration of vehicles increases, the utilization of the waste tires is emerging as environmental issues. Crumb rubber reproduced by scrap tires has been reused up to 25% in the construction field. The purpose of this paper is to investigate the mechanical properties of sulfur-rubber concrete (SRC) and to suggest the optimum mix design in terms of the compressive strength. Specimens were prepared with various mixing parameters: amount of sulfur, rubber, and micro-fillers. Two casting processes were also mentioned; dry process and wet process. The results mainly showed that the compressive strength of SRC decreased with an increment of rubber content. However, adding micro-filler and adjusting sulfur contents could improve the compressive strength of SRC. Optimum values of sulfur and rubber content were selected by workability and compressive strength of SRC. SRC can be applied to road constructions where high strength of concrete is not concerned, to wall panels that require low unit weight, to construction of median in highways to resist high impact load, and in sound barriers to absorb sound waves.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.341-358
• /
• 2003

This paper proposed a general formulation of Life-Cycle Cost (LCC) models and LCC effective design system models of steel bridges suitable for practical implementation. An LCC model for the optimum design of steel bridges included initial cost and direct/indirect rehabilitation costs of a steel bridge as well as repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socioeconomic losses. The new road user cost model and regional socioeconomic losses model were especially considered because of the traffic network. Illustrative design examples of an actual steel box girder and an orthotropic steel deck bridge were discussed to demonstrate the LCC effectiveness of the design of steel bridges. Based on the results of the numerical investigation, the LCC-effective optimum design of steel bridges based on the proposed LCC model was found to lead to a more rational, economical, and safer design compared with the initial cost-optimum design and the conventional code-based design.

• Korean Journal of Microbiology
• /
• v.16 no.4
• /
• pp.170-179
• /
• 1978

By the successive enrichment culture, more than 250 methanol-utilizing bacteria were isolated from various samples such as soil, waste water and sewage. Two strains of which were selected and tentatively identified as Acinetobacter sp. and Pseudomonas sp. experiments were carried out to determine the growth conditions for the higher biomass yield and to demonstrate the difference to protein composition dependent upon carbon sources of these two species. the results were as follows ; 1. the optimum pH was determined as 8 in the both species. The optimum temperature in Acinetobacter sp. was $25^{\circ}C{\sim}30^{\circ}C$ and pseudomonas sp. was $30^{\circ}C-35^{\circ}C$. The optimum initial concentration of mthanol was determined as 1-2% in Acinetobacter sp. and 2-3% in pseudomonas sp. 2. The optimum concnetrations of nitrogen source, micro-elements, and vitamins such as biotin and thiamine-HCl in Acnetobactar sp. were 1g $(NH_4)_3SO4,\;1{\sim}3mg\;Mn^{++},\;4mg\;Fe^{++},\;10{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine-HCl per liter medium. In the Pseudomonas sp., 2g $(NH_4)_3SO4,\;1mg\;Mn^{++},\;trace\;amounts\;of\;Fe^{++},\;5{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine HCl per liter were effective. Maximum biomass yield was 2.5g/l in Acinetobacter sp. and 4.8g/l in Pseudomonas sp. 3. Protein composition of the two strains exhibited that alkai-labile protein was higher than alkali-stable protein. In Pseudomonas sp., the contents of acid soluble fraction and alkali-stable protein of the cells grown in the methanol medium were higher than in sucrose medium. On the other hand, in Acinetobacter sp., alkalilabile protein of the cells grown in sucrose medium was higher than in methanol medium.

• Journal of Powder Materials
• /
• v.4 no.3
• /
• pp.170-178
• /
• 1997

An investigation was performed to apply the M3/2 grade high speed steel for metal injection molding using both prealloyed and elementally blended powders. The injected samples were subjected to a debinding step in $H_2/N_2$ gas atmosphere at a ratio that affected the carbon content of the material. The carbon content ranged from 1.4wt.% to 1.43wt%. with increasing $H_2$ content up to 80% $H_2$ in $H_2/N_2$ atmosphere for the prealloyed powders. The carbon contents of the elementally blended powders exhibited 1.44wt.% and 1.62wt.% at 10% $H_2/N_2$ and 20% $H_2/N_2$ gas, respectively. This level decreased to 0.17wt.% upon increasing the $H_2$ content. The sintered density of both powders increased rapidly as the temperature reached the liquid phase forming temperature. After forming the liquid phase, the density rapidly increased to the optimum sintering temperature for the prealloyed powders, whereas the density of mixed elemental powders goes up slowly to the optimum sintering temperature. The optimum sintering temperature and density are 126$0^{\circ}C$ and 97.3% for the prealloyed powders and 128$0^{\circ}C$ and 96.9% for the elementally blended powders, respectively. The microstructure of the specimen at the optimum sintering temperature consisted of fine grains with primary carbides of MC and $M_6C$ type for the prealloyed powders. The elementally blended powders exhibited coarse grains with eutectic carbides of MC, $M_2C$ and $M_6C$ type.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.481-491
• /
• 2003

A squid meat has not been utilized for gel products because of its lower gel forming ability. The objectives of this study were as followed; 1) the optimum heating condition on squid meat paste products and 2) the optimum added level for jelly strength of squid meat paste products. Optimum heating conditions of squid meat kamaboko were as followed; setting (pre-heating) at 15$^{\circ}C$ or 55$^{\circ}C$ for 2 hours and heating at 90$^{\circ}C$ for 60 minutes. Effect for jelly strength of starch additives wheat starch, potato starch and com starch were examined. The jelly strength of heat induced gels differed from the levels of additives. In case of adding starch, potato starch was resulted in the superior jelly strength than the other starchs, wheat starch and corn starch, at any levels. Optimum concentration was 10%(w/w) at every additives. Folding test value was B at added 10% and this value was mean good product. Data of jumbo and flying squid meat paste products added potato starch, corn starch and wheat starch of 10% were shown below, jelly strengths were 858${\pm}$34∼1020${\pm}$37gㆍcm and 966${\pm}$33∼l148${\pm}$45gㆍcm and moisture contents were 72.43∼73.04% and 71.61∼72.78%, respectively. To adding edible agar and sea tangle, showed the highest jelly strength (edible agar>sea tangle, flying squid>jumbo squid) at added 0.5%(w/w) concentration.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.137-147
• /
• 1993

Terrain is on of the most important factors in the selection of defense areas. The objective of the study is selection optimum defense area between Seoul and Dongducheon using GIS technique. The contents of the study are: (1) to select the defense area by pure terrain factors, (2) to select the defense area with focusing on the avenues of approach, and (3) to compare the above two kinds of area. The study area is located in the northeastern part of Seoul metropolitan area. It is part of Choogaryung Rift Valley which is running from Seoul to Wonsan. Six factors are considered for the selection: tactical distance, direction, elevation, slope, aspect and the distance from main roads. The defense score of each area is calculated by the multiplication of scores of each factors. The optimum defense area I consists of high-mountain areas such as Mt. Dobong, Mt. Wan-gbang, etc. The optimum defense area II consists of high-mountain areas along the three main roads selected. An east-west line of optimum defense area from Kuksabong in the east to Mt. Bulkuk in the west through Chookseok pass is identified from the spatial pattern of the area II. The line is also a dividing line between the northern and the southern watersheds.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.229-237
• /
• 1995

This study was investigated with denitrification of wastewater containing nitrate using upflow sludge blanket process. Contents of this study were the NO3--N removal efficiency by various hydrogen donor addition, determination of optimum COD/$NO_3^--N$ ratio and characteristics of granular sludge.