• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.3
• /
• pp.245-252
• /
• 2007

The important problems from the point of view of preventing global warming are to save the power consumption of automotive air-conditioning systems and reduce the refrigerant amount filled. To achieve such requirements, integral receiver/dryer (R/D) condensers were developed recently. Typical integral R/D condensers have extra headers that play the role of R/D. Except an extra header and somewhat complex tube array resulting from the extra header, the most integral R/D condensers have almost the same specification that tube has multi channels, fin has louvers, flow in tube is parallel, etc. When integral condensers are applied, it is known that the refrigerating effect increases, resulting from the increase of subcooling degree in condenser, and the refrigerant amount used saves. In spite of several merits, integral condensers have not been applied a lot. That is why there is an uncertainty in performance, using integral condensers. The objective of this study is to theoretically optimize the tube array in an integral R/D condenser that is really being applied to some vehicles. The tube array has a great effect on the performance of the integral condenser as well as common ones. Through computer simulation, we could see that the tube array, 14-6-3-5-3-4, in the same condenser was the best, comparing heat release rate, pressure drop, etc. to the real array, 17-5-3-3-2-5. It should be noted that the optimization is based on the condenser performance only.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.28-39
• /
• 1991

A study on the optimization problems to find forebode shapes with minimum wavemaking and frictional resistance was performed. The afterbody was fixed as a given hull and only forebode offsets were treated as design variables. Design variables were divided into the offsets of given hull and small variation from them. For the wavemaking resistance calculation, Neumann-Kelvin theory was applied to the given hull and thin ship theory was applied to the small variation. ITTC 1957 model-ship correlation line was used for the calculation of frictional resistance. Hull surface was represented mathmatically using shape function. As object function, such as wavemaking and frictional rersistance, was quadratic form of offsets and constraints linear, quadratic programing problem could be constructed. The complementary pivot method was used to find the soulution of the quadratic programing problem. Calculations were perfomed for the Series 60 $C_{B}$=0.6. at Fn=0.289. A realistic hull form could be obtained by using proper constraints. From the results of calculation for the Series 60 $C_{B}$=0.6, it was concluded that present method gave optimal shape of bulbous bow showing a slight improvement in the wave resistance performance at design speed Fn=0.289 compared with the results from the ship theory only.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2007

As the number of public Web Services increases, there will be many services with the same functionality. These services. however, will vary in their QoS properties, such as price, response time and availability, and it is very important to choose a best service while satisfying given QoS constraints. This paper brings parallel branching and response time constraint of business processes into focus and investigates several service selection plans based on multidimensional multiple choice Knapsack model. Specifically. proposed in the paper are a plan with response time constraints for each execution flow, a plan with a single constraint over the whole service types and a plan with a constraint on a particular execution path of a composite Web Services. Experiments are conducted to observe the performance of each plan with varying the number of services, the number of branches and the values of response time constraint. Experimental results show that reducing the number of candidate services using Pareto Dominance is very effective and the plan with a constraint over the whole service types is efficient in time and solution quality for small to medium size problems.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.19-26
• /
• 2010

In this paper, we suggest a efficient handwritten character verification method in on-line environments which automatically analyses two input character string and computes their similarity degrees. The proposed algorithm first applies the circular projection method to input handwritten strings and extracts their representative features including shape, directions, etc. It then calculates the similarity between two character strings by using an improved dynamic time warping (DTW) algorithm. We improved the conventional DTW algorithm efficiently through adopting the branch-and-bound policy to the existing DTW algorithm which is well-known to produce good results in the various optimization problems. The experimental results to verify the performance of the proposed system show that the suggested handwritten character verification method operates more efficiently than the existing DTW and DDTW algorithms in terms of the speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.83-93
• /
• 2014

It is a widespread concern that electrical interconnection based network-on-chip (NoC) will ultimately face the limitation in communication bandwidth, transmission latency and power consumption in the near future. With the development of silicon photonics technology, a hybrid optical network-on-chip (HONoC) which embraces both electrical- and optical interconnect, is emerging as a promising solution to overcome these problems. Today's leading edge systems-on-chips (SoCs) comprise heterogeneous many-cores for higher energy efficiency, therefore, extended study beyond regular topology based NoC is required. This paper proposes an energy and latency optimization topology design technique for HONoC taking into account the traffic characteristics of target applications. The proposed technique is implemented with genetic algorithm and simulation results show the reduction by 13.84% in power loss and 28.14% in average latency, respectively.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.5
• /
• pp.29-44
• /
• 2000

Adaptation of operator probabilities is one of the most important and promising issues in evolutionary computation areas. This is because the setting of appropriate probabilities is not only very tedious and difficult but very important to the performance improvement of genetic algorithms. Many researchers have introduced their algorithms for setting or adapting operator probabilities. Experimental results in most previous works, however, have not been satisfiable. Moreover, Tuson have insisted that “the adaptation is not necessarily a good thing” in his papers［$^1$$^2$］. In this paper, we propose a self-tuning scheme for adapting operator probabilities in genetic algorithms. Our scheme was extensively tested on four function optimization problems and one combinational problem； and compared to simple genetic algorithms with constant probabilities and adaptive genetic algorithm proposed by Srinivas et al［$^3$］. Experimental results showed that our scheme was superior to the others. Our scheme compared with previous works has three advantages： less computational efforts, co-evolution without additional operations for evolution of probabilities, and no need of additional parameters.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2018

As the key equipment in deep ocean mining, the slurry pump suffers from wear and blocking problems. In this paper, high-speed photography technique is applied to track the movement rule of single particle of the coarse particle solid-liquid two-phase flow in a double blade slurry pump. The influences of particle diameter and particle density on the pass-through and collision characteristics of particles are analyzed as well. The results show that the average of the passing pump time first decreases and then increases when the particle diameter increases. The average of the passing pump time decreases by 22.7%, when the particle density increases from $1.09g/cm^3$ to $1.75g/cm^3$. Besides, the particle density has great influence on the location where the particle hits the tongue. Most particles of $1.09g/cm^3$ hit the tongue on the left side, while collision location of particles of $1.75g/cm^3$ is mainly on the top and at the right side of the tongue. The research can provide a basis for the optimization design of slurry pump in deep ocean mining system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.138-143
• /
• 2006

This paper presents intelligent digital redesign method for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also, by using the bilinear and inverse bilinear approximation method, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs). Finally, a TS fuzzy model for the chaotic Lorentz system is used as an . example to guarantee the stability and effectiveness of the proposed method.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.589-592
• /
• 2007

While it is these days, and is increased importance as opposed to design management in managing a construction business necessity as opposed to collaboration business design management between collaboration business business company is regarded as important. An object was put in deriving a flow of a design process about the design management business and a grasp, management element as opposed to management by reason of the first, building design business ability improvement by a study of a book hereby, and an alternative plan of collaboration business design management for use in design optimization of difficulty of a disagreement, workshop modification city design information chase between books by lack of collaboration business between things of each minimization, company was shown with, air in a base in problems grasp as opposed to a collaboration business design by the second" work-site operations and a design process management element. Therefore, this thesis is going to show expected effect of a project about collaboration business design management through systematic practical use about a collaboration business design.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.203-211
• /
• 2012

Network security infrastructure is constantly developing based on the combination and blending of various types of devices. From the form of distributed control, the phased defense policy such as fire walls, virtual private communication network, invasion prevention system, invasion detection system, corporate security management, and TSM (Telebiometrics System Mechanism), now it consolidates security devices and solutions to be developed to the step of concentration and artificial intelligence. Therefore, this article suggests network security infrastructure design types concentrating security devices and solutions as platform types and provides network security infrastructure design selecting methodology, the foundational data to standardize platform design according to each situation so as to propose methodology that can realize and build the design which is readily applied and realized in the field and also can minimize the problems by controlling the interferences from invasion.